Instant quote across 15 Volvo XC90 variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Volvo
Model
XC90
No card required · Free to quote
Prices vary across the XC90 range depending on generation and ADAS equipment. Earlier 2002–2014 models without forward-facing cameras are typically more affordable, while second-generation (2015+) vehicles equipped with IntelliSafe cameras, GPS antennas, and LIDAR sensors carry higher calibration complexity and matching replacement costs.
Acoustic glass and solar-control coatings, found on higher-spec variants, also influence the final quote. Your specialist will confirm the exact cost once the parts check identifies your exact variant.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £650 — £1,230 | 6 variants | Price my 2026 |
| 2025 | £650 — £1,230 | 6 variants | Price my 2025 |
| 2024 | £650 — £1,230 | 6 variants | Price my 2024 |
| 2023 | £650 — £1,230 | 6 variants | Price my 2023 |
| 2022 | £650 — £1,283 | 7 variants | Price my 2022 |
| 2021 | £650 — £1,283 | 7 variants | Price my 2021 |
| 2020 | £650 — £1,283 | 7 variants | Price my 2020 |
| 2019 | £650 — £1,283 | 7 variants | Price my 2019 |
| 2018 | £650 — £1,283 | 7 variants | Price my 2018 |
| 2017 | £650 — £1,283 | 7 variants | Price my 2017 |
| 2016 | £650 — £1,283 | 7 variants | Price my 2016 |
| 2015 | £357 — £1,190 | 5 variants | Price my 2015 |
| 2014 | £357 — £445 | 2 variants | Price my 2014 |
| 2013 | £357 — £445 | 2 variants | Price my 2013 |
| 2012 | £357 — £451 | 5 variants | Price my 2012 |
| 2011 | £368 — £451 | 3 variants | Price my 2011 |
| 2010 | £368 — £451 | 3 variants | Price my 2010 |
| 2009 | £368 — £451 | 3 variants | Price my 2009 |
| 2008 | £368 — £451 | 3 variants | Price my 2008 |
| 2007 | £368 — £451 | 3 variants | Price my 2007 |
| 2006 | £368 — £451 | 3 variants | Price my 2006 |
| 2005 | £368 — £451 | 3 variants | Price my 2005 |
| 2004 | £368 — £451 | 3 variants | Price my 2004 |
| 2003 | £368 — £451 | 3 variants | Price my 2003 |
| 2002 | £368 — £451 | 3 variants | Price my 2002 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older XC90s can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,495 Trustpilot reviews.
Booking through UK Car Glass is a simple four-step process.
Use our online widget to answer a few quick questions about your XC90 — make, model, year, and key features. Your quote appears in under a minute.
Complete your booking online — choose your preferred date and location (mobile at home or a local workshop).
Our parts team confirms your exact glass specification and matches you with a specialist in your area.
Your fitter arrives with the correct replacement glass, removes the old windscreen, fits the new one, and completes any required camera calibration (at a workshop if needed). Typically completes within a couple of hours, times vary by variant.
You'll receive a two-year warranty on workmanship and glass quality. Your fitter confirms the drive-away time before you leave.
All replacements come with a two-year warranty covering workmanship and glass defects.
Most XC90 windscreen replacements can be carried out at your home as a mobile service. However, if your XC90 is equipped with Volvo's IntelliSafe camera system (common on 2015+ models), static calibration is required after the glass is fitted — this must be done at a workshop with proper target boards and a level floor.
Your specialist will confirm whether your specific variant needs workshop calibration during the booking process. If it does, the entire job (replacement and calibration) is scheduled at one location — we don't split mobile and workshop visits. Calibration runs in parallel with adhesive cure, so it doesn't add to your drive-away time.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the Volvo XC90: fitted on every one of the 14 windscreen variants we list; model years 2002–2026.
A small box printed at the bottom of the windscreen displaying your vehicle's VIN (chassis number) for identification.
Present on all XC90 variants — confirmed during your parts check.
On the Volvo XC90: fitted on 13 of the 14 windscreen variants we list (93%); model years 2002–2026.
A subtle green tint in the glass, barely visible to the eye, that reduces glare and improves optical clarity — standard on most modern Volvos.
Found on 80% of XC90 variants across both generations — your parts check will confirm if your model carries it.
On the Volvo XC90: fitted on 12 of the 14 windscreen variants we list (86%); model years 2002–2026; no calibration after replacement.
An invisible sensor embedded in the windscreen that automatically triggers your wipers when rain is detected, without you touching the stalk.
Standard on most XC90 models from 2002 onwards — confirmed during the parts check.
On the Volvo XC90: fitted on 9 of the 14 windscreen variants we list (64%); model years 2015–2026.
A sound-dampening interlayer in the glass that reduces road and wind noise, making the cabin quieter on the motorway.
Found on 53% of XC90 variants, typically higher-spec trims and later generations — look for 'Acoustic' or 'SoundScreen' printed in one corner, or confirmed during your parts check.
On the Volvo XC90: fitted on 8 of the 14 windscreen variants we list (57%); model years 2015–2026; calibration varies by vehicle.
A forward-facing camera integrated into the windscreen area, part of Volvo's IntelliSafe driver-assistance suite. Requires static calibration after replacement.
Present on approximately 47% of XC90 variants, primarily second-generation (2015+) models. If your XC90 has IntelliSafe, your replacement windscreen will carry a camera bracket — confirmed at the parts check.
We confirm the exact procedure for your specific vehicle when you book.
On the Volvo XC90: fitted on 6 of the 14 windscreen variants we list (43%); model years 2015–2026.
GPS antenna built into the windscreen connects your sat-nav to satellite signals for reliable navigation.
A GPS antenna is laminated into the windscreen glass during manufacture, providing a direct aerial connection for your vehicle's satellite-navigation system. This integrated design offers better signal reception than external antennas and a cleaner aesthetic. The antenna print and electrical connector are engineered into the glass itself, allowing the navigation receiver to lock onto GPS satellites without interference from the vehicle's metal body or other components.
Check your vehicle's handbook or ask your dealership service centre whether your windscreen carries an integrated GPS antenna. You won't see obvious external aerials or connectors on the glass itself — the antenna is laminated internally. If your sat-nav works reliably without a visible roof-mounted antenna, it's likely GPS-equipped.
Replacement windscreens with GPS antennas must be sourced as OEM (original-equipment) glass to preserve navigation functionality. The antenna print pattern and electrical connector are specific to your vehicle's sat-nav system. Aftermarket glass without the antenna print will not support GPS reception. We confirm OEM availability when you book; lead times may be slightly longer than standard glass.
On the Volvo XC90: fitted on 6 of the 14 windscreen variants we list (43%); model years 2015–2026; bespoke calibration.
LIDAR helps your car sense its surroundings for advanced safety and driver-assistance features.
LIDAR (Light Detection and Ranging) is a sensor technology that uses laser beams to detect objects, obstacles, and road features in three dimensions. It creates a detailed map of the vehicle's surroundings in real time, enabling advanced driver-assistance systems (ADAS) such as adaptive cruise control, collision avoidance, and autonomous emergency braking. LIDAR complements camera and radar systems by providing precise distance and depth information, even in poor visibility or low-light conditions. It is increasingly fitted to modern vehicles as part of their safety and autonomous-capability infrastructure.
Check your vehicle's handbook or contact your dealership to confirm LIDAR fitment. LIDAR sensors are typically mounted on the roof, bumpers, or within the windscreen/rear-window frame area. You may see reference to 'LIDAR', 'laser radar', or specific safety-feature names (e.g. 'adaptive cruise control', 'autonomous emergency braking') that rely on LIDAR in your documentation.
If your windscreen or rear window houses or frames a LIDAR sensor, replacement requires careful handling to preserve or recalibrate the sensor post-fit. LIDAR calibration procedures vary significantly by vehicle make, model, and year—some require static alignment using specialist target equipment, others demand dynamic road-drive procedures, and some use a combination. We identify the exact calibration requirement when we look up your specific vehicle and confirm it with you before booking.
On the Volvo XC90: fitted on 5 of the 14 windscreen variants we list (36%); model years 2002–2015.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
On the Volvo XC90: fitted on 4 of the 14 windscreen variants we list (29%); model years 2002–2015.
A special coating that absorbs the sun's infrared rays, keeping the cabin cooler on hot days without darkening the glass.
Fitted to 27% of XC90 variants, usually premium or higher trims — confirmed during the parts check if your model carries it.
On the Volvo XC90: fitted on 3 of the 14 windscreen variants we list (21%); model years 2015–2026; calibration varies by vehicle.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
We confirm the exact procedure for your specific vehicle when you book.
On the Volvo XC90: fitted on 3 of the 14 windscreen variants we list (21%); model years 2015–2026; calibration varies by vehicle.
Dynamic calibration uses road driving to recalibrate your camera after windscreen replacement.
Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.
Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.
After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.
We confirm the exact procedure for your specific vehicle when you book.
On the Volvo XC90: fitted on 3 of the 14 windscreen variants we list (21%); model years 2015–2026.
Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.
Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.
Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.
Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.
On the Volvo XC90: fitted on 3 of the 14 windscreen variants we list (21%); model years 2015–2026.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
On the Volvo XC90: fitted on 3 of the 14 windscreen variants we list (21%); model years 2015–2026; no calibration after replacement.
A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.
A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.
Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.
Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.
On the Volvo XC90: fitted on 3 of the 14 windscreen variants we list (21%); model years 2015–2026; calibration varies by vehicle.
Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.
A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.
Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.
Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.
We confirm the exact procedure for your specific vehicle when you book.
On the Volvo XC90: fitted on 2 of the 14 windscreen variants we list (14%); model years 2015–2026; calibration varies by vehicle.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
We confirm the exact procedure for your specific vehicle when you book.
On the Volvo XC90: fitted on 1 of the 14 windscreen variants we list (7%); model years 2002–2012; calibration varies by vehicle.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
On the Volvo XC90: fitted on 1 of the 14 windscreen variants we list (7%); model years 2002–2012.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
The Volvo XC90 has been in continuous production since 2002, evolving through two major generations. The original generation (2002–2014) featured straightforward laminated windscreens with rain sensors on most variants, while the second generation (2015 onwards) introduced Volvo's IntelliSafe suite with forward-facing mono cameras, GPS antennas, and LIDAR sensors integrated into the windscreen area.
Green-tinted glass is the norm across 80% of XC90 variants, paired with rain sensors that automatically activate your wipers. Many later models carry acoustic interlayers to reduce cabin noise, and some feature solar-control coatings to manage heat absorption on sunny days.
From around 2015, camera integration became more common as IntelliSafe rolled out across the range. This means replacement windscreens on newer XC90s often require static camera calibration after fitting — a process completed at a workshop with the vehicle properly positioned.
Own a different Volvo? We've got you — every variant, every year.
The questions customers ask us most often.
