Peugeot 306 windscreen replacement booked online in under 60 seconds, fitted by approved fitters across the UK.
Make
Peugeot
Model
306
No card required · Free to quote
Variation across the 306's production run reflects its multi-generation lifespan and optional trim features. Models fitted with rain sensors or green sun strips may carry slightly different pricing depending on glass specification and availability. Earlier models without these features are typically the most affordable to replace.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2001 | £299 — £820 | 5 variants | Price my 2001 |
| 2000 | £299 — £820 | 5 variants | Price my 2000 |
| 1999 | £299 — £820 | 5 variants | Price my 1999 |
| 1998 | £299 — £820 | 5 variants | Price my 1998 |
| 1997 | £299 — £820 | 5 variants | Price my 1997 |
| 1996 | £299 — £820 | 5 variants | Price my 1996 |
| 1995 | £299 — £820 | 5 variants | Price my 1995 |
| 1994 | £299 — £820 | 5 variants | Price my 1994 |
| 1993 | £299 — £528 | 4 variants | Price my 1993 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 306s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Peugeot 306 windscreen replacement is quick and simple.
Enter your vehicle details through our online quote tool — takes under 60 seconds and identifies your exact windscreen variant.
Receive an instant quote reflecting your model's generation, tint, and optional features like rain sensors or sun strips.
Proceed to checkout and choose your fitting date and location — mobile fitting at your address or a local workshop.
A specialist from our network will contact you to confirm the appointment and complete a final parts check.
On fitting day, the technician will remove your old windscreen, fit the replacement, and confirm your drive-away time before leaving.
Your replacement carries a two-year warranty on workmanship and glass quality.
UKCG handles the coordination; our partner technicians deliver the fit.
The 306 predates modern ADAS camera systems, so windscreen replacement doesn't require calibration work. Mobile fitting at your address is the default — your technician brings all tools and adhesive needed and completes the job on your driveway or street.
Choosing a workshop is always an option if you prefer, especially during poor weather. UKCG will match you with a local technician offering your preferred location.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
A green-tinted band at the windscreen's top edge that reduces glare from sunlight above.
A green sun strip is a graduated tint band integrated into the windscreen's laminate at the upper edge. It filters intense sunlight and glare from above — particularly useful on motorways and in bright conditions — whilst maintaining clarity through the main viewing area below. The tint is permanent, fused into the laminate layer during manufacture, and cannot be applied or removed afterwards. Sun strips are a windscreen-only feature because they must be built into the laminate during production; side and rear glass cannot carry them as they are typically toughened rather than laminated.
Look at the top edge of your windscreen from the inside. A sun strip appears as a distinct green-tinted gradient band that fades from darker at the very top to clear below. It is visible whether the car is parked or moving. You can also check your vehicle's specification sheet or ask your dealership or current service centre to confirm whether your windscreen includes a sun strip.
The replacement windscreen must be the green sun strip variant to match your original. This is not a post-fit addition; it must be ordered as part of the glass itself. Availability is usually straightforward for current and recent models from major manufacturers, though older or less common variants may require a longer lead time. The sun strip does not affect calibration requirements or cure time — it is simply a laminate feature and does not complicate the fitting process.
The Peugeot 306 was in production from 1993 to 2001, spanning multiple generations and trim levels. Most 306 windscreens feature a subtle green tint, though some earlier or specialist variants came with clear glass.
Green sun strips — a tinted gradient band at the top of the windscreen — appear on select models and must be matched exactly on replacement. Rain sensors are fitted to some higher-spec variants, automating wiper activation during rain.
The 306 sits outside the modern ADAS era, so windscreen replacement is straightforward without camera calibration. Your replacement glass will match your factory specification and be UK-approved for the road.
Own a different Peugeot? We've got you — every variant, every year.
The questions customers ask us most often.
