Malcolm W.
Verified on Trustpilot3 Jul 2024
Customer Response
Very pleased with the order service and installation. Excellent work. Old windscreen removed and new installed within 20 minutes
Volvo V70 rear window replacement — instant quote across 13 variants, fitted by approved fitters, booked in under two minutes.
Make
Volvo
Model
V70
No card required · Free to quote
Prices vary based on which generation and feature set your V70 carries. Earlier models from the late 1990s and early 2000s without integrated features tend to be more affordable. Later variants with brake-light circuits, fitting hardware, solar control, or tinting additions cost more because the replacement glass is more specialised.
Encapsulated glass (with pre-fitted rubber trim bonded to the edges) and laminated rear windows—found on some premium variants—also command higher costs due to their complexity.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2016 | £416 — £993 | 4 variants | Price my 2016 |
| 2015 | £416 — £993 | 4 variants | Price my 2015 |
| 2014 | £416 — £993 | 4 variants | Price my 2014 |
| 2013 | £416 — £993 | 4 variants | Price my 2013 |
| 2012 | £416 — £993 | 4 variants | Price my 2012 |
| 2011 | £416 — £993 | 4 variants | Price my 2011 |
| 2010 | £416 — £993 | 4 variants | Price my 2010 |
| 2009 | £416 — £993 | 6 variants | Price my 2009 |
| 2008 | £416 — £993 | 6 variants | Price my 2008 |
| 2007 | £416 — £993 | 9 variants | Price my 2007 |
| 2006 | £416 — £821 | 6 variants | Price my 2006 |
| 2005 | £459 — £821 | 5 variants | Price my 2005 |
| 2004 | £459 — £821 | 5 variants | Price my 2004 |
| 2003 | £459 — £821 | 5 variants | Price my 2003 |
| 2002 | £459 — £821 | 5 variants | Price my 2002 |
| 2001 | £459 — £821 | 5 variants | Price my 2001 |
| 2000 | £459 — £810 | 5 variants | Price my 2000 |
| 1999 | £721 — £810 | 2 variants | Price my 1999 |
| 1998 | £721 — £810 | 2 variants | Price my 1998 |
| 1997 | £721 — £810 | 2 variants | Price my 1997 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older V70s can still be booked.
Showing 2 reviews from verified Volvo V70 owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking a rear-window replacement through UKCG is straightforward and takes just minutes.
Start with a quick online quote using our guided quiz — you'll tell us your V70's year, generation, and visible features in under 60 seconds.
Once you've reviewed the quote, complete your booking online, choosing a time that suits you.
Our team carries out a parts check to confirm your exact glass variant and any integrated features like brake lights or fitting hardware.
You're matched with a local, approved fitter in your area who collects the correct glass and arrives at your chosen location.
The replacement typically takes 30–60 minutes of the fitter's time. Shattered rear-window glass means shard cleanup is a major part of the job — your fitter will clear what's accessible, but we recommend a professional valet afterwards for thorough detailing.
Your fitter confirms the minimum drive-away time before leaving, and your replacement is covered by our two-year warranty.
From quote to fitted glass, the whole process is designed to be quick, transparent, and backed by our network of trusted local technicians.
Most V70 rear-window replacements are fitted at your home or workplace as a mobile visit — the more convenient option for a straightforward glass swap. Your fitter brings the replacement glass and carries out the job on your driveway or parking space.
Because rear-window replacement doesn't involve ADAS camera calibration (unlike windscreen jobs), there's no requirement to visit a workshop. However, if you prefer a workshop environment or have accessibility concerns at your address, your fitter can arrange that at booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
GPS antenna built into the windscreen connects your sat-nav to satellite signals for reliable navigation.
A GPS antenna is laminated into the windscreen glass during manufacture, providing a direct aerial connection for your vehicle's satellite-navigation system. This integrated design offers better signal reception than external antennas and a cleaner aesthetic. The antenna print and electrical connector are engineered into the glass itself, allowing the navigation receiver to lock onto GPS satellites without interference from the vehicle's metal body or other components.
Check your vehicle's handbook or ask your dealership service centre whether your windscreen carries an integrated GPS antenna. You won't see obvious external aerials or connectors on the glass itself — the antenna is laminated internally. If your sat-nav works reliably without a visible roof-mounted antenna, it's likely GPS-equipped.
Replacement windscreens with GPS antennas must be sourced as OEM (original-equipment) glass to preserve navigation functionality. The antenna print pattern and electrical connector are specific to your vehicle's sat-nav system. Aftermarket glass without the antenna print will not support GPS reception. We confirm OEM availability when you book; lead times may be slightly longer than standard glass.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
A tinted grey glass that's darker than the front windows but still lets you see through in daylight.
Dark grey tint is a factory-fitted glass option that reduces glare and heat whilst maintaining visibility in normal daylight conditions. It sits between clear glass (front windscreen and windows) and privacy glass (rear windows on some models), offering a subtle aesthetic enhancement and mild thermal benefit. The tint is integral to the glass laminate or coating and cannot be applied or removed after manufacture.
Look at your rear window or rear side windows in daylight. If they appear noticeably darker than your front windscreen but you can still see clearly through them from outside, you have dark grey tint.
When replacing dark grey glass, the replacement must match the original tint specification to maintain consistency with your vehicle's remaining windows and factory thermal performance. Dark grey tint is specified at manufacture and must be sourced as OEM or OE-equivalent glass; standard clear replacements will not match. No calibration is required for this glass type.
Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
Laminated windscreens hold together when they crack, staying bonded to an inner layer rather than shattering into dangerous shards.
Laminated glass consists of two glass panes bonded to a tough plastic interlayer, usually polyvinyl butyral (PVB). When struck, the glass cracks but the interlayer holds the pieces in place, preventing the sharp shards that would scatter from tempered glass. This design prioritises occupant safety — the windscreen remains structurally sound even after impact, reducing the risk of ejection and keeping wind and weather out of the cabin. Laminated glass also provides sound dampening and blocks most ultraviolet light. All modern windscreens are laminated as standard.
Look at your windscreen edge-on — you'll see a thin darker line (the interlayer) sandwiched between the two glass panes. Tap the glass gently with your knuckle: laminated glass produces a duller, more solid sound compared to the sharper ring of tempered side or rear windows. Your service manual or dealer can confirm, but all production windscreens are laminated.
Laminated glass is bonded to the frame with structural adhesive, so cure time applies after replacement. Your windscreen is safety-critical — it contributes up to 30% of vehicle structural integrity and supports airbag deployment. The adhesive bond must fully cure before the vehicle is driven normally; your fitter will confirm the specific drive-away time before releasing the car. This is true whether or not your windscreen has camera or sensor features.
The Volvo V70 has been in continuous production since 1997, evolving through multiple generations of this practical estate car. Rear windows across the range are typically toughened glass, designed to shatter safely if broken — a key difference from the laminated windscreen at the front.
From the mid-2000s onwards, many V70 variants introduced integrated features such as brake-light circuits, fitting hardware pre-bonded to the glass, and green-tinted options. Later models also began incorporating solar-control coatings to reduce cabin heat in summer. These features must be matched exactly on replacement to preserve original function.
Own a different Volvo? We've got you — every variant, every year.
The questions customers ask us most often.