Instant quote across Volvo XC40 variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Volvo
Model
XC40
No card required · Free to quote
Pricing varies across the four active XC40 variants based on the complexity of hardware laminated into the glass — models with antenna or TV-antenna systems require precision matching during sourcing, which can affect cost. Tinted variants and those with solar-control coating may also influence pricing depending on supplier availability.
Earlier XC40s (2017–2019) and later models (2020+) can carry different feature sets, so the year of your vehicle and the specific hardware fitted affects the final quote.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £525 — £682 | 4 variants | Price my 2026 |
| 2025 | £525 — £682 | 4 variants | Price my 2025 |
| 2024 | £525 — £682 | 4 variants | Price my 2024 |
| 2023 | £525 — £682 | 4 variants | Price my 2023 |
| 2022 | £525 — £682 | 4 variants | Price my 2022 |
| 2021 | £525 — £682 | 4 variants | Price my 2021 |
| 2020 | £525 — £682 | 4 variants | Price my 2020 |
| 2019 | £525 — £682 | 4 variants | Price my 2019 |
| 2018 | £525 — £682 | 4 variants | Price my 2018 |
| 2017 | £525 — £682 | 4 variants | Price my 2017 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older XC40s can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your rear-window replacement through UKCG is straightforward — from instant quote to fitting day.
Answer a quick online quiz about your XC40 (year, trim, and features) to get an instant quote — takes under a minute.
Complete your booking online in about two minutes, choosing your preferred fitting date and location.
UKCG matches you with an approved fitter in your area who sources your replacement glass and confirms all antenna and hardware details.
Your fitter arrives at your home or workshop on the booked date. Rear-window replacement typically takes 30–60 minutes of active work, plus shard cleanup.
Because the original glass is shattered, small shards can lodge in places fitters can't reach on the day — we recommend a professional valet afterwards for a thorough interior clean.
Your new rear window is covered by a two-year warranty on workmanship and glass quality.
Aftercare is simple: give the adhesive time to cure (your fitter confirms the drive-away time before leaving) and book a valet if you want a detailed interior clean.
Most XC40 rear-window replacements are carried out at your home or preferred location as a mobile service. Because the rear window is not part of the ADAS camera system (unlike windscreen replacement), no calibration is required, and the job can typically be completed anywhere accessible to a technician.
Weather or access issues may occasionally prompt a workshop visit instead — your fitter will discuss this with you during booking. The no-split rule applies: if a workshop is needed, the full job is scheduled there so there's no back-and-forth.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Factory-fitted brackets and mounts bonded to the glass, pre-assembled and ready to fit without sub-assembly.
Other Hardware refers to factory-fitted brackets, mounts, connectors, or trim pieces bonded permanently to the windscreen or other glass during manufacturing. These are integral to the vehicle's design but do not activate or control a specific feature — they simply secure or position components like sensors, trim strips, or mounting points. Unlike feature-specific hardware, these items are passive structural elements. A replacement carrying Other Hardware arrives pre-bonded and ready to install without additional assembly or modification.
Check your vehicle documentation or ask your dealership service centre whether your windscreen or glass panel carries factory-bonded brackets or mounts. Visual inspection may reveal trim strips, sensor housings, or antenna mounts bonded to the edges or interior surface of the glass. Your original invoice or parts list will specify if Other Hardware is present.
Replacement glass carrying Other Hardware must be sourced as a complete assembly — the brackets and mounts come pre-bonded from the supplier and cannot be transferred from the old glass. Installation is straightforward: the fitter removes the old glass and fits the replacement with its hardware already in place. No additional sub-assembly, bonding, or recalibration of the hardware itself is required. Fitting time is unaffected.
Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A TV-reception aerial printed into the rear window, typically for in-car entertainment systems.
A TV antenna is an aerial pattern laminated into the rear windscreen or rear side window to receive broadcast television signals. It's a separate system from the vehicle's radio or mobile antenna and is typically found in vehicles equipped with rear-seat entertainment systems. The antenna is printed directly onto or into the glass during manufacture, so when the glass is replaced, the antenna pattern must be reproduced on the replacement to maintain reception quality.
Check your vehicle's specification sheet or handbook for rear-seat entertainment or TV tuner capability. If your car has a rear-seat entertainment system with a TV tuner, the rear window will have a TV antenna. You can also ask your dealer or service centre to confirm whether your vehicle has this feature.
When the rear window is replaced, the replacement glass must include the matching TV antenna print to preserve reception. OEM (original equipment manufacturer) glass is typically required to ensure the antenna pattern is identical. The antenna is passive and requires no calibration or specialist procedures after fitting. Cure time for bonded rear glass is required; the fitter will confirm the drive-away time on the day.
The Volvo XC40 has been in production since 2017 on the Compact Modular Architecture (CMA) platform, establishing itself as a popular compact SUV across the UK market. Rear windows on the XC40 are typically toughened glass and arrive shattered during replacement, requiring thorough shard cleanup as part of the fitting process.
Many XC40 variants feature hardware laminated into the rear glass — antenna elements for radio and DAB reception, and on some models, TV-antenna systems for rear-seat entertainment. These must be matched exactly on replacement to preserve your vehicle's original reception capabilities.
Depending on the model year and trim, your rear window may carry dark-tinted glass (darker than the front side windows) or solar-control coating that absorbs infrared rays. The specialists you're matched with will verify these features during the parts check and ensure your replacement meets the exact factory specification.
Own a different Volvo? We've got you — every variant, every year.
The questions customers ask us most often.
