Volvo V40 Cross Country windscreen replacement booked online in under 60 seconds — fitted by approved fitters across the UK.
Make
Volvo
Model
V40 Cross Country
No card required · Free to quote
Pricing is straightforward for the V40 Cross Country because the catalogue holds only one active variant across 2012–2013. Variation stems from the camera system requiring post-fit calibration, which extends technician time and typically necessitates a workshop visit rather than a mobile fit. Specialist technicians in our network charge accordingly for the calibration work.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2013 | £633 — £633 | 1 variant | Price my 2013 |
| 2012 | £633 — £633 | 1 variant | Price my 2012 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older V40 Cross Countrys can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your V40 Cross Country windscreen replacement through UK Car Glass is simple and takes just a few minutes.
Answer a short quiz about your V40 Cross Country (year, features) — our system confirms your exact variant in under 60 seconds.
Proceed to checkout and book your fitting appointment with an available technician.
Our parts-check team verifies the correct encapsulated glass and confirms your camera calibration will be included.
Your technician arrives at the workshop (mobile fitting isn't available for this model due to ADAS calibration requirements) and fits your windscreen.
Static camera calibration is completed while the adhesive cures, so drive-away time is confirmed before the technician leaves.
Your replacement comes with a two-year warranty covering workmanship and glass quality.
From start to finish, the job typically completes within a couple of hours, and you're covered by our standard two-year warranty.
Your V40 Cross Country requires a workshop visit rather than a mobile fit because the forward-facing camera system needs static calibration after the windscreen is replaced. Calibration is performed using alignment target boards in a controlled environment, which isn't practical on a driveway. The no-split rule means the entire job — replacement and calibration — is scheduled at one workshop location so calibration is guaranteed to happen.
Calibration doesn't extend your drive-away time; it runs in parallel with adhesive cure while the technician completes the work on-site.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Volvo V40 Cross Country arrived in 2012 as a raised, adventure-oriented variant of the compact V40 saloon, sitting between the mainstream V40 and the larger XC60. Its windscreen carries rain sensors and a green-tinted laminate as standard, along with a VIN notch at the base.
From 2012 onwards, V40 Cross Country models incorporated forward-facing camera systems as part of Volvo's IntelliSafe safety suite, meaning windscreen replacements require static camera calibration after fitting. The encapsulated rubber trim is bonded to the glass at the factory, so replacements arrive as a complete panel-plus-frame unit ready to fit.
Own a different Volvo? We've got you — every variant, every year.
The questions customers ask us most often.
