PK
Patrick K.
Verified on Trustpilot2 Dec 2025
Very helpful punctual and exactly as it…
Very helpful punctual and exactly as it says on the tin
Vauxhall Corsa windscreen replacement — booked online.
Instant quote across 20 Vauxhall Corsa variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £328 to £769
4.82 / 5 ·
1,422 Trustpilot reviews
Get your quote
Under 60 secondsMake
Vauxhall
Model
Corsa
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Vauxhall Corsa windscreen price, by year
Price variation across Corsa variants is driven mainly by generation and feature uptake. Older models without cameras or rain sensors are typically the most affordable to replace. Later variants with solar-control glass, encapsulation, and rain-sensor integration carry moderate increases in cost.
Camera-equipped models (a small subset) require static calibration after replacement, which adds technician time and typically involves a workshop fit rather than mobile attendance — this complexity is reflected in pricing.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £769 — £769 | 1 variant | Price my 2026 |
| 2025 | £769 — £769 | 1 variant | Price my 2025 |
| 2024 | £667 — £769 | 2 variants | Price my 2024 |
| 2023 | £667 — £769 | 2 variants | Price my 2023 |
| 2022 | £667 — £769 | 2 variants | Price my 2022 |
| 2021 | £667 — £769 | 2 variants | Price my 2021 |
| 2020 | £667 — £769 | 2 variants | Price my 2020 |
| 2019 | £339 — £745 | 5 variants | Price my 2019 |
| 2018 | £339 — £745 | 5 variants | Price my 2018 |
| 2017 | £339 — £745 | 5 variants | Price my 2017 |
| 2016 | £339 — £745 | 5 variants | Price my 2016 |
| 2015 | £339 — £745 | 5 variants | Price my 2015 |
| 2014 | £339 — £745 | 5 variants | Price my 2014 |
| 2013 | £328 — £524 | 6 variants | Price my 2013 |
| 2012 | £328 — £524 | 6 variants | Price my 2012 |
| 2011 | £328 — £524 | 6 variants | Price my 2011 |
| 2010 | £328 — £524 | 6 variants | Price my 2010 |
| 2009 | £328 — £524 | 6 variants | Price my 2009 |
| 2008 | £328 — £524 | 6 variants | Price my 2008 |
| 2007 | £328 — £524 | 5 variants | Price my 2007 |
| 2006 | £339 — £524 | 4 variants | Price my 2006 |
| 2005 | £297 — £590 | 3 variants | Price my 2005 |
| 2004 | £297 — £590 | 3 variants | Price my 2004 |
| 2003 | £297 — £590 | 3 variants | Price my 2003 |
| 2002 | £282 — £590 | 5 variants | Price my 2002 |
| 2001 | £282 — £590 | 5 variants | Price my 2001 |
| 2000 | £282 — £590 | 5 variants | Price my 2000 |
| 1999 | £282 — £337 | 3 variants | Price my 1999 |
| 1998 | £282 — £337 | 3 variants | Price my 1998 |
| 1997 | £282 — £337 | 3 variants | Price my 1997 |
| 1996 | £282 — £337 | 3 variants | Price my 1996 |
| 1995 | £282 — £337 | 3 variants | Price my 1995 |
| 1994 | £282 — £337 | 3 variants | Price my 1994 |
| 1993 | £282 — £337 | 3 variants | Price my 1993 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Corsas can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
What Vauxhall Corsa owners say
5.00/5 across 10 verified Vauxhall Corsa owners
Showing 10 reviews from verified Vauxhall Corsa owners. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
What to expect during your Vauxhall Corsa windscreen replacement
Booking a Corsa windscreen replacement through UKCG takes minutes and follows a straightforward path from quote to fitted glass.
- 1
Start with our online quote widget — answer a few questions about your Corsa's generation and features to get an instant price across your specific variant.
- 2
Complete your booking in under two minutes online, choosing your preferred fitting date and location (mobile at your address or a workshop).
- 3
We match you with an approved fitter near you who sources glass matched to your factory specification.
- 4
On fitting day, the technician removes the old windscreen, inspects the pinch-weld frame for corrosion, and bonds the new glass in place — typically 45–90 minutes of their time, depending on your model.
- 5
If your Corsa has a forward camera for driver assistance, static calibration runs in parallel with adhesive cure; no additional drive-away wait is added.
- 6
Your fitter confirms the minimum drive-away time before leaving and you're covered by a two-year warranty on workmanship and glass quality.
The whole process is designed to be transparent and hassle-free — from instant quote to fitted glass backed by our two-year guarantee.
Mobile fitting or workshop visit for your Corsa?
Most Corsa windscreen replacements are fitted mobile at your address for convenience. However, if your Corsa is equipped with a forward-facing camera for driver assistance (found on a small subset of recent variants), the job is scheduled at a workshop.
This is because static camera calibration requires a controlled environment with target boards and proper diagnostic equipment — it cannot be safely performed on a driveway. We never split the job across locations, so replacement and calibration happen together at the workshop, and you're confirmed on the drive-away time before your fitter leaves.
We confirm the specific answer for your vehicle when you book.
What features does your Corsa have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green16
1993–2026Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Encapsulation13
2006–2026Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
What it means
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
How to tell
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Replacement impact
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Vin Notch13
2006–2026A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
What it means
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
How to tell
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
Replacement impact
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Solar Control12
2000–2019Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Fitting Hardware10
2006–2026Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
What it means
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
How to tell
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Replacement impact
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Rain Sensor9
2000–2026No calibration after replacementYour wipers automatically activate when rain falls on the windscreen.
What it means
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
How to tell
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Replacement impact
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Blue Sun Strip3
1993–2005A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
What it means
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
How to tell
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
Replacement impact
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Clear3
1993–2013Calibration varies by vehicleClear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Heated Windscreen3
2014–2019Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
What it means
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
How to tell
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Replacement impact
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Acoustic (Noise reduction)2
2020–2026Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
What it means
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
How to tell
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Replacement impact
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Bracket For Safety Features2
2014–2024Calibration varies by vehicleThe moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Camera2
2020–2026Calibration varies by vehicleA camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
What it means
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
How to tell
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Replacement impact
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Coating2
2000–2013Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
What it means
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
How to tell
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
Replacement impact
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Defogging Detector1
2020–2026A defogging detector automatically clears condensation from your windscreen, improving visibility in damp conditions.
What it means
A defogging detector is a sensor that monitors moisture levels on the windscreen and triggers the demister system automatically when condensation builds up. It improves driver visibility and safety in damp or cold weather by preventing manual intervention. The sensor typically sits near the rear-view mirror, positioned to sense moisture accumulation on the glass surface.
How to tell
Check your vehicle's handbook or ask your dealer's service centre whether your model includes an automatic defogging or moisture-sensing demister. Look near the rear-view mirror for a small sensor unit. Some vehicles display an indicator light or message on the dashboard when the system is active.
Replacement impact
The defogging detector does not affect windscreen replacement or require recalibration after fitting. The sensor itself remains in place and continues to function once the new windscreen is installed. No additional calibration, cure time, or specialist procedures are needed.
Dynamic Camera Calibration Process1
2014–2019Calibration varies by vehicleDynamic calibration uses road driving to recalibrate your camera after windscreen replacement.
What it means
Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.
How to tell
Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.
Replacement impact
After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.
Mono Camera1
2014–2019Calibration varies by vehicleA single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
What it means
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
How to tell
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
Replacement impact
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Other Hardware1
2020–2024Factory-fitted brackets and mounts bonded to the glass, pre-assembled and ready to fit without sub-assembly.
What it means
Other Hardware refers to factory-fitted brackets, mounts, connectors, or trim pieces bonded permanently to the windscreen or other glass during manufacturing. These are integral to the vehicle's design but do not activate or control a specific feature — they simply secure or position components like sensors, trim strips, or mounting points. Unlike feature-specific hardware, these items are passive structural elements. A replacement carrying Other Hardware arrives pre-bonded and ready to install without additional assembly or modification.
How to tell
Check your vehicle documentation or ask your dealership service centre whether your windscreen or glass panel carries factory-bonded brackets or mounts. Visual inspection may reveal trim strips, sensor housings, or antenna mounts bonded to the edges or interior surface of the glass. Your original invoice or parts list will specify if Other Hardware is present.
Replacement impact
Replacement glass carrying Other Hardware must be sourced as a complete assembly — the brackets and mounts come pre-bonded from the supplier and cannot be transferred from the old glass. Installation is straightforward: the fitter removes the old glass and fits the replacement with its hardware already in place. No additional sub-assembly, bonding, or recalibration of the hardware itself is required. Fitting time is unaffected.
About the Vauxhall Corsa
The Vauxhall Corsa has been a mainstay of the UK market since 1993, evolving through multiple generations from the original supermini to today's modern compact hatchback. Early models carry straightforward laminated windscreens with minimal integrated features.
From the mid-2010s onwards, later Corsas began featuring tinted glass (typically a subtle green tint that's harder to spot), rain sensors on higher trims, and solar-control coatings to reduce interior heat. Some variants also gained encapsulated trim — a pre-fitted rubber gasket bonded directly to the glass edges at the factory, so the seal arrives as part of the replacement panel.
A small proportion of recent Corsas (roughly 15% of active variants) have been equipped with forward-facing camera systems for driver assistance features, which requires static calibration after windscreen replacement. These jobs are scheduled at a workshop to ensure proper camera realignment.
Other Vauxhall models
Own a different Vauxhall? We've got you — every variant, every year.
- Vauxhall Astra From £262
- Vauxhall Combo From £281
- Vauxhall Meriva From £300
- Vauxhall Vectra From £306
- Vauxhall Agila From £310
- Vauxhall Astra-GTC From £312
- Vauxhall Adam From £313
- Vauxhall Tigra From £314
- Vauxhall Zafira From £323
- Vauxhall Insignia From £332
- Vauxhall Frontera From £338
- Vauxhall Movano From £350
Frequently asked questions
The questions customers ask us most often.