DF
Donald F.
308 ownerTrustpilot6 Jul 2023
Peugeot 308
windscreen replacement
first class professional job fast careful and proficient
Peugeot 308 windscreen replacement — booked online.
Instant quote across 13 Peugeot 308 variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £343 to £694
4.82 / 5 ·
1,493 Trustpilot reviews
Get your quote
Under 60 secondsMake
Peugeot
Model
308
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Peugeot 308 windscreen price, by year
Prices vary significantly across the 308's three generations and trim progression. Early 2000s models without acoustic or sensor equipment are typically the most affordable, whilst later generations with rain sensors and acoustic lamination carry moderate variation.
Cameras and ADAS calibration requirements on 2021+ models introduce further cost factors through calibration complexity, though this doesn't change your drive-away time since calibration runs in parallel with adhesive cure.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £694 — £694 | 1 variant | Price my 2026 |
| 2025 | £694 — £694 | 1 variant | Price my 2025 |
| 2024 | £694 — £694 | 1 variant | Price my 2024 |
| 2023 | £694 — £694 | 1 variant | Price my 2023 |
| 2022 | £694 — £694 | 1 variant | Price my 2022 |
| 2021 | £694 — £694 | 1 variant | Price my 2021 |
| 2020 | £395 — £653 | 4 variants | Price my 2020 |
| 2019 | £395 — £653 | 4 variants | Price my 2019 |
| 2018 | £395 — £653 | 4 variants | Price my 2018 |
| 2017 | £395 — £653 | 4 variants | Price my 2017 |
| 2016 | £395 — £532 | 3 variants | Price my 2016 |
| 2015 | £395 — £532 | 3 variants | Price my 2015 |
| 2014 | £376 — £532 | 5 variants | Price my 2014 |
| 2013 | £376 — £532 | 5 variants | Price my 2013 |
| 2012 | £343 — £571 | 7 variants | Price my 2012 |
| 2011 | £343 — £571 | 7 variants | Price my 2011 |
| 2010 | £343 — £571 | 7 variants | Price my 2010 |
| 2009 | £343 — £571 | 7 variants | Price my 2009 |
| 2008 | £343 — £571 | 6 variants | Price my 2008 |
| 2007 | £376 — £453 | 2 variants | Price my 2007 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 308s can still be booked.
What Peugeot 308 owners say
Showing 1 review from verified Peugeot 308 owners. Across the whole of UK Car Glass, 4.82/5 from 1,493 Trustpilot reviews.
What to expect during your Peugeot 308 windscreen replacement
Booking your Peugeot 308 windscreen replacement through UK Car Glass takes just a few straightforward steps.
- 1
Complete the quick online quiz (make, model, year, and feature details) to identify your exact variant — takes under 60 seconds.
- 2
Get an instant quote based on your specification and local availability — no registration number needed.
- 3
Book online and choose your fitting location: mobile at home or at a workshop near you.
- 4
Our parts-check team confirms your exact glass specification and sources the correct replacement.
- 5
A specialist from our network is matched to your job and fitted within your preferred timeframe — typically 45–90 minutes of technician time for windscreen work.
- 6
Your fitter confirms the minimum drive-away time before leaving (depends on the adhesive used and ambient conditions).
- 7
Two-year warranty on workmanship and glass quality covers any issues traceable to the replacement job.
The entire booking process takes under two minutes, and fitted specialists on our network handle the rest.
Mobile fitting or workshop visit for your 308?
Most Peugeot 308 replacements can be fitted mobile at your home. However, third-generation 308 models (2021+) equipped with Drive Assist Plus and front cameras require static ADAS calibration after the windscreen is fitted.
When calibration is needed, the entire job (replacement plus calibration) is scheduled at a workshop so the camera can be recalibrated using specialist diagnostic equipment in a controlled environment. Calibration runs in parallel with adhesive cure, so it doesn't extend your drive-away time.
We confirm the specific answer for your vehicle when you book.
What features does your 308 have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic (Noise reduction)12
2007–2026On the Peugeot 308: fitted on every one of the 12 windscreen variants we list; model years 2007–2026.
What it means
Acoustic laminated windscreen reduces road and wind noise — common on higher trims and later generations.
On your Peugeot 308
Peugeot uses the option code L3P for acoustic glass; you can verify it via your infotainment menu, physical labels, or by contacting your dealer with your chassis number. This will be confirmed during your quote.
Vin Notch12
2007–2026On the Peugeot 308: fitted on every one of the 12 windscreen variants we list; model years 2007–2026.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
What it means
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
How to tell
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
Replacement impact
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Green10
2007–2026On the Peugeot 308: fitted on 10 of the 12 windscreen variants we list (83%); model years 2007–2026.
What it means
A subtle green tint built into the glass for heat control and visual comfort — present on most Peugeot 308 variants.
On your Peugeot 308
Green tint is difficult to spot from inside the car; it will be confirmed during your parts-check quote process.
Rain Sensor9
2007–2026No calibration after replacementOn the Peugeot 308: fitted on 9 of the 12 windscreen variants we list (75%); model years 2007–2026; no calibration after replacement.
What it means
Automatic wiper activation triggered by moisture detection — fitted on mid-range and higher trims across most generations.
On your Peugeot 308
If your wipers activate automatically when it rains, you have a rain sensor. This feature became more common from the second generation onwards and will be identified in your quote.
Solar Control4
2007–2014On the Peugeot 308: fitted on 4 of the 12 windscreen variants we list (33%); model years 2007–2014.
What it means
Solar-control coating absorbs infrared rays to reduce interior heat — typically a premium-trim option on later generations.
On your Peugeot 308
This will be identified as part of your glass specification during the quote process.
Camera2
2017–2026Calibration varies by vehicleOn the Peugeot 308: fitted on 2 of the 12 windscreen variants we list (17%); model years 2017–2026; calibration varies by vehicle.
What it means
Front-mounted camera for Drive Assist Plus driver assistance — present on 2021+ third-generation 308 models with this suite.
On your Peugeot 308
Look for a triangular camera housing in the black field near the rear-view mirror at the top of the windscreen. Camera-equipped variants require static ADAS calibration after replacement.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Clear2
2007–2014Calibration varies by vehicleOn the Peugeot 308: fitted on 2 of the 12 windscreen variants we list (17%); model years 2007–2014; calibration varies by vehicle.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Coating2
2007–2014On the Peugeot 308: fitted on 2 of the 12 windscreen variants we list (17%); model years 2007–2014.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
What it means
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
How to tell
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
Replacement impact
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Bracket For Safety Features1
2017–2020Calibration varies by vehicleOn the Peugeot 308: fitted on 1 of the 12 windscreen variants we list (8%); model years 2017–2020; calibration varies by vehicle.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Dynamic Camera Calibration Process1
2017–2020Calibration varies by vehicleOn the Peugeot 308: fitted on 1 of the 12 windscreen variants we list (8%); model years 2017–2020; calibration varies by vehicle.
Dynamic calibration uses road driving to recalibrate your camera after windscreen replacement.
What it means
Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.
How to tell
Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.
Replacement impact
After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Heated Windscreen1
2013–2020On the Peugeot 308: fitted on 1 of the 12 windscreen variants we list (8%); model years 2013–2020.
What it means
A mesh of thin heating wires bonded into the glass for rapid defrosting — found on select high-specification trims.
On your Peugeot 308
Heated windscreen availability varies by model year and trim; confirmed during your parts check.
Heated Wiper Rest Area1
2013–2020On the Peugeot 308: fitted on 1 of the 12 windscreen variants we list (8%); model years 2013–2020.
Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.
What it means
A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.
How to tell
Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.
Replacement impact
When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.
Mono Camera1
2017–2020Calibration varies by vehicleOn the Peugeot 308: fitted on 1 of the 12 windscreen variants we list (8%); model years 2017–2020; calibration varies by vehicle.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
What it means
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
How to tell
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
Replacement impact
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
About the Peugeot 308
The Peugeot 308 has been in continuous production since 2007, evolving through three generations with significant glass feature progression. Early models carried straightforward laminated windscreens, while later generations introduced acoustic glass, rain sensors, and green-tinted options as trim-dependent features.
From the third generation onwards (2021+), the 308 moved to the EMP2 platform and adopted Drive Assist Plus driver assistance systems. This brought front-mounted cameras to the windscreen, making post-replacement calibration a necessity on equipped variants. The platform shift also expanded acoustic lamination availability and introduced encapsulated trim edges on certain trims.
Other Peugeot models
Own a different Peugeot? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.