Peugeot rear window replacement

What Peugeot rear window features mean

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Heated Rear Windscreen85

  1982–2026

  Across the Peugeot range: fitted on every one of the 25 Peugeot models we list; model years 1982–2026.

  Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.

  What it means

  A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.

  How to tell

  Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.

  Replacement impact

  Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.

• Green51

  1987–2026

  Across the Peugeot range: fitted on 20 of the 25 Peugeot models we list (80%); model years 1987–2026.

  Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.

  What it means

  Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.

  How to tell

  The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.

  Replacement impact

  Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.

• Solar Control34

  1994–2026

  Across the Peugeot range: fitted on 14 of the 25 Peugeot models we list (56%); model years 1994–2026.

  Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.

  What it means

  Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.

  How to tell

  Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.

  Replacement impact

  Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.

• Antenna23

  1990–2026

  Across the Peugeot range: fitted on 10 of the 25 Peugeot models we list (40%); model years 1990–2026.

  An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.

  What it means

  An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.

  How to tell

  Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.

  Replacement impact

  When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.

• Clear20

  1982–2008Calibration varies by vehicle

  Across the Peugeot range: fitted on 8 of the 25 Peugeot models we list (32%); model years 1982–2008; calibration varies by vehicle.

  Clear windscreen glass has no tint; most cars have a slight tint as standard.

  What it means

  A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.

  How to tell

  Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.

  Replacement impact

  Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings.

• Grey Privacy15

  2005–2026

  Across the Peugeot range: fitted on 12 of the 25 Peugeot models we list (48%); model years 2005–2026.

  Dark grey tint on rear windows provides privacy and reduces interior heat and glare.

  What it means

  Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.

  How to tell

  Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.

  Replacement impact

  Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.

• Unheated Rear Windscreen11

  1994–2026

  Across the Peugeot range: fitted on 3 of the 25 Peugeot models we list (12%); model years 1994–2026.

  A rear window without heating elements — selected when the model's standard specification includes a heated rear glass option.

  What it means

  An unheated rear window is a variant specification where the rear glass does not include integrated electric heating wires. Many vehicle models offer heated rear glass as standard or as an option to demist the window quickly in cold or wet conditions. An unheated rear window omits this feature entirely. It is a cost-conscious choice and remains fully functional for visibility and weather protection — demisting simply takes longer and relies on the vehicle's cabin heating system alone.

  How to tell

  Check your vehicle's specification sheet or service documentation. If your model range lists 'heated rear window' or 'rear demister' as a standard or optional feature and your car does not have it, you have an unheated variant. You can also look at the rear window itself — a heated rear window shows a faint pattern of horizontal heating wires when you look closely at the glass. An unheated window appears completely clear with no wire pattern visible.

  Replacement impact

  Replacement glass must match your original specification. If your vehicle has an unheated rear window, the replacement must also be unheated — you cannot fit a heated variant without additional wiring and control-module work, which falls outside standard glass replacement scope. Conversely, if heated glass is standard for your model and you wish to stay unheated, confirm this choice at booking. No calibration is involved with rear-window replacement.

• Green Privacy10

  2002–2026

  Across the Peugeot range: fitted on 6 of the 25 Peugeot models we list (24%); model years 2002–2026.

  Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.

  What it means

  Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.

  How to tell

  Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.

  Replacement impact

  Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.

• Brake Light7

  1995–2026

  Across the Peugeot range: fitted on 5 of the 25 Peugeot models we list (20%); model years 1995–2026.

  A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.

  What it means

  A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.

  How to tell

  Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.

  Replacement impact

  The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.

• Open7

  2002–2022

  Across the Peugeot range: fitted on 4 of the 25 Peugeot models we list (16%); model years 2002–2022.

  An opening pane with hinged hardware, typically on rear quarters or van sides.

  What it means

  An opening glass pane is a hinged or pivoting section of bodyglass designed to swing or tilt outward for ventilation or access. Commonly found on rear quarters of estates or vans, and on van side panels. Unlike fixed side windows or windscreens, opening panes are part of the vehicle's passive ventilation system and allow airflow without opening a door or window. The hinge and frame hardware are integral to the feature's function.

  How to tell

  Check your vehicle's side and rear quarter panels for hinged glass sections that swing outward. Ask your dealer or service centre whether your model includes rear quarter vents or van-side opening panels. Your handbook will list ventilation features. Opening panes are visually distinct from sliding or rolling windows — they pivot on visible hinges rather than moving vertically or horizontally.

  Replacement impact

  UKCG handles opening-pane replacement on a bespoke basis — please contact us for a quote rather than using the automated quote tool. Replacement includes the glass pane and matching hinge hardware where supplied. Fitting time is typically brief as there is no adhesive cure or calibration required. The pane is held in place by mechanical hinges and seals, so you can use the vehicle immediately after fitting.

• Bronze3

  1982–1998

  Across the Peugeot range: fitted on 2 of the 25 Peugeot models we list (8%); model years 1982–1998.

  Bronze tint reduces glare and heat whilst maintaining a warm aesthetic that complements most vehicle interiors.

  What it means

  Bronze tint is a coloured coating applied to the windscreen during manufacture to reduce solar heat transmission and glare from sunlight. It's one of several standard tint options (alongside green, grey, and blue) offered by most vehicle makers. The tint doesn't impair visibility but gives the glass a warm, brownish appearance when viewed from outside. Most modern vehicles have some form of windscreen tint as standard—it's rarely a clear, untinted windscreen.

  How to tell

  Roll down a side window halfway and hold a white piece of paper behind the glass from outside. If you see a bronze or warm-brown tint in the side window, your windscreen carries the same tint. Alternatively, ask your vehicle's dealer or service centre for the original windscreen specification—they can confirm the tint colour code. Most documentation refers to it as 'bronze' or occasionally 'warm bronze'.

  Replacement impact

  When replacing a windscreen with bronze tint, the replacement glass must match the original tint specification exactly. Fitting an untinted or differently tinted windscreen will create a noticeable colour mismatch with the side windows and alter the vehicle's interior light and thermal characteristics. We confirm the exact tint code from your vehicle's records and source an OE-equivalent or OEM glass to preserve the original appearance and performance.

• Heated Windscreen3

  2012–2026

  Across the Peugeot range: fitted on 1 of the 25 Peugeot models we list (4%); model years 2012–2026.

  Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.

  What it means

  A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.

  How to tell

  Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.

  Replacement impact

  Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.

• Dark Green2

  2001–2009

  Across the Peugeot range: fitted on 2 of the 25 Peugeot models we list (8%); model years 2001–2009.

  Dark green tinted rear and side glass that's noticeably darker than the front windscreen but still see-through in daylight.

  What it means

  Dark green tint is a factory-applied colour to the rear window and side windows on some vehicles. It serves both aesthetic and functional purposes: it reduces glare and heat from sunlight, provides a degree of privacy without completely obscuring the interior, and contributes to the vehicle's overall design. Unlike privacy glass (which is much darker and difficult to see through from outside), dark green tint maintains reasonable transparency while still offering a tinted appearance.

  How to tell

  Look at your rear window and rear side windows in daylight. If they appear noticeably darker and greenish in tone compared to your front windscreen, you have dark green tint. The tint will be clearly visible when you look at the vehicle from outside, but you'll still be able to see through to the interior in normal daylight. Check your vehicle documentation or ask your dealership if you're uncertain.

  Replacement impact

  Replacement glass must match the original dark green tint specification to maintain the vehicle's appearance and light-control properties. We source OEM or OE-equivalent tinted glass to the correct colour specification. Tinted glass is available from stock for most common vehicles, though lead times may occasionally be slightly longer than untinted variants. Installation and cure procedures are identical to standard glass; tint does not affect fitting time or drive-away windows.

• Flat1

  2006–2026

  Across the Peugeot range: fitted on 1 of the 25 Peugeot models we list (4%); model years 2006–2026.

  A flat glass panel, common on van rear quarters and fixed side panels, sourced as a separate variant from curved equivalents.

  What it means

  Flat glass refers to a side or rear panel with a plane surface rather than a curved or contoured profile. This is typical of van rear quarter glass, fixed side panels on certain commercial vehicles, and some fixed glazing on passenger cars. Flat glass is structurally simpler than curved variants and is often used where aerodynamics or design complexity is less critical. It's stocked and catalogued separately from any curved equivalent on the same vehicle, because the manufacturing process, fit tolerances, and seal requirements differ.

  How to tell

  Check your vehicle's side or rear panels visually — flat glass will have a noticeably plane surface when you look at its profile from the side. Compare it to curved windscreens or rear windows, which have obvious contour. If you're unsure, ask your vehicle's service centre or dealership parts department whether your side or rear glass is flat or curved; they can confirm from the parts diagram.

  Replacement impact

  Flat glass replacement is straightforward — no calibration is involved because flat glass carries no sensors, cameras, or electronic features. The fit process is typically faster than curved glass because the seal and adhesive application follows a flat plane. Cure time applies if the glass is bonded (e.g. fixed side panels or rear windows), but the cure chemistry is standard. Aftermarket flat glass variants are usually available alongside OEM options, so sourcing is rarely a constraint.