Jennifer H.
Verified on Trustpilot7 Oct 2026
2012 FIAT 500L
They were more helpful than the…
They were more helpful than the insurance company and was done on no time price was excellent booking process easy
Peugeot 407 rear window replacement — instant quote across 3 variants, fitted by approved fitters — booked in under two minutes.
Make
Peugeot
Model
407
No card required · Free to quote
Pricing varies depending on which of the three active variants your 407 carries — largely driven by the presence of integrated features like antenna, brake-light circuits, and solar-control coating. Earlier and simpler specifications are more affordable; fully equipped models with encapsulated trim and multiple integrated systems reflect the additional complexity.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2010 | £387 — £930 | 3 variants | Price my 2010 |
| 2009 | £387 — £930 | 3 variants | Price my 2009 |
| 2008 | £387 — £930 | 3 variants | Price my 2008 |
| 2007 | £450 — £930 | 2 variants | Price my 2007 |
| 2006 | £450 — £930 | 2 variants | Price my 2006 |
| 2005 | £450 — £930 | 2 variants | Price my 2005 |
| 2004 | £450 — £930 | 2 variants | Price my 2004 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 407s can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,490 Trustpilot reviews.
From your online quote through to the finished replacement, the process is straightforward and takes a few days.
Get an instant quote through our online widget in about a minute — answer a few questions about your 407's features and year.
We match you with an approved fitter in your area and confirm the exact glass variant during our parts-check process.
Your fitter attends at a time that suits you — typically mobile at your home, though workshop fitting is available if preferred.
The rear window replacement takes around 30–60 minutes of the fitter's time. Shard cleanup from the shattered original is part of the job, but small fragments can lodge in places fitters can't always reach — we recommend a professional valet afterwards for thorough interior detailing.
Your fitter confirms the minimum drive-away time before leaving, so you can plan accordingly.
Enjoy two years' warranty on workmanship and glass quality — if anything goes wrong, contact us and we'll arrange remediation.
The whole process from booking to completion typically takes a couple of hours on the day, and you're covered by our two-year warranty.
Most 407 rear-window replacements are mobile — your fitter can attend at your home and fit the glass on your driveway. However, if your specific variant carries multiple integrated features (antenna, brake-light circuits, solar coating), the fitter may recommend a workshop location for comprehensive testing and verification.
Mobile fitting is the default; if a workshop visit offers better value or convenience for your situation, you can request it at booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the Peugeot 407: fitted on every one of the 3 rear window variants we list; model years 2004–2010.
An aerial laminated into the glass for radio, DAB or TV reception — your replacement must carry the matching antenna print and connector.
Confirmed during the quote process — all active 407 variants carry this feature.
On the Peugeot 407: fitted on every one of the 3 rear window variants we list; model years 2004–2010.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
On the Peugeot 407: fitted on 2 of the 3 rear window variants we list (67%); model years 2004–2010.
A subtle green tint present in the glass that's hard to spot but essential to match for visual continuity and optics.
Standard on two of the three active 407 variants — confirmed during your quote.
On the Peugeot 407: fitted on 2 of the 3 rear window variants we list (67%); model years 2004–2010.
A solar-control coating that absorbs the sun's infrared rays, reducing interior heat build-up — a premium feature on select trims.
Fitted to higher-specification 407 models — confirmed during the quote phase.
On the Peugeot 407: fitted on 1 of the 3 rear window variants we list (33%); model years 2004–2010.
An integrated brake light circuit within the rear-window glass — the replacement must carry the same silkscreen and connectors so the lighting circuit reconnects cleanly.
Present on one of the three active 407 variants — the quote process identifies which specification you have.
On the Peugeot 407: fitted on 1 of the 3 rear window variants we list (33%); model years 2004–2010.
Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
On the Peugeot 407: fitted on 1 of the 3 rear window variants we list (33%); model years 2004–2010.
An opening pane with hinged hardware, typically on rear quarters or van sides.
An opening glass pane is a hinged or pivoting section of bodyglass designed to swing or tilt outward for ventilation or access. Commonly found on rear quarters of estates or vans, and on van side panels. Unlike fixed side windows or windscreens, opening panes are part of the vehicle's passive ventilation system and allow airflow without opening a door or window. The hinge and frame hardware are integral to the feature's function.
Check your vehicle's side and rear quarter panels for hinged glass sections that swing outward. Ask your dealer or service centre whether your model includes rear quarter vents or van-side opening panels. Your handbook will list ventilation features. Opening panes are visually distinct from sliding or rolling windows — they pivot on visible hinges rather than moving vertically or horizontally.
UKCG handles opening-pane replacement on a bespoke basis — please contact us for a quote rather than using the automated quote tool. Replacement includes the glass pane and matching hinge hardware where supplied. Fitting time is typically brief as there is no adhesive cure or calibration required. The pane is held in place by mechanical hinges and seals, so you can use the vehicle immediately after fitting.
The Peugeot 407 was produced from 2004 to 2010 across a single generation, establishing itself as a mid-size saloon with modern glass integration for its era. Its rear window typically featured toughened glass with integrated components like antenna and brake-light elements on certain trim levels.
Many 407 variants carry green-tinted rear glass as standard, with solar-control coating available on higher specifications. Encapsulation (pre-fitted rubber trim bonded to the glass edges) was fitted to most models, meaning your replacement arrives ready to bond without additional trim work.
Own a different Peugeot? We've got you — every variant, every year.
The questions customers ask us most often.