MS
Matthew S.
Trustpilot2 Nov 2026
2017 Scania S-Series
Scania truck screen
Had a windscreen fitted to a Scania lorry, the whole process was made very easy by UK Car Glass. Great communication and great service. Very happy
Peugeot Traveller windscreen replacement — booked online.
Instant quote across five Peugeot Traveller variants, fitted by approved fitters near you — booked in under two minutes.
Prices from £346 to £869
4.82 / 5 ·
1,500 Trustpilot reviews
Get your quote
Under 60 secondsMake
Peugeot
Model
Traveller
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Peugeot Traveller windscreen price, by year
Prices vary with generation, ADAS equipment presence, and glass feature content. Early Travellers without cameras and with basic acoustic options sit at the lower end of the range. Current-generation models with Drive Assist Plus camera systems and acoustic or solar-control glass command higher fees, primarily due to the static calibration procedure required after fitting and the additional technician time involved.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £346 — £869 | 6 variants | Price my 2026 |
| 2025 | £346 — £869 | 6 variants | Price my 2025 |
| 2024 | £346 — £869 | 6 variants | Price my 2024 |
| 2023 | £346 — £757 | 5 variants | Price my 2023 |
| 2022 | £346 — £757 | 5 variants | Price my 2022 |
| 2021 | £346 — £757 | 5 variants | Price my 2021 |
| 2020 | £346 — £757 | 5 variants | Price my 2020 |
| 2019 | £346 — £757 | 5 variants | Price my 2019 |
| 2018 | £346 — £757 | 5 variants | Price my 2018 |
| 2017 | £346 — £757 | 5 variants | Price my 2017 |
| 2016 | £346 — £757 | 5 variants | Price my 2016 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Peugeot Traveller models can still be booked.
Recent UK Car Glass reviews
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,500 Trustpilot reviews.
What to expect during your Peugeot Traveller windscreen replacement
Booking through UK Car Glass is straightforward — our guided quote process identifies your exact Traveller variant, then matches you with a specialist near you.
- 1
Answer a brief online quiz about your Traveller's features (year, trim level, presence of rain sensors or camera systems).
- 2
Receive an instant quote matched to your variant — typically under 60 seconds.
- 3
Complete your booking online in about a minute, choosing mobile or workshop fitting.
- 4
Our parts-check team verifies the exact glass specification needed, including any camera brackets or acoustic interlayers.
- 5
Your matched technician confirms the appointment and handles the replacement — typically 45–90 minutes for the windscreen, with static calibration (if required) completed during the same visit.
- 6
If a workshop visit is needed for ADAS calibration, it's scheduled as one complete job, not split across locations.
All work is covered by our two-year warranty on workmanship and glass quality.
Mobile fitting or workshop visit for your Traveller?
Most Traveller windscreen replacements can be fitted mobile at your home or workplace. However, if your Traveller is equipped with a front camera for Drive Assist Plus, static calibration using specialist diagnostic equipment is required after the glass is fitted.
Because UKCG does not split jobs across locations, camera-equipped Travellers are scheduled at a workshop where calibration can be completed in a controlled environment. Your technician confirms which type of fitting suits your variant at the booking stage.
We confirm the specific answer for your vehicle when you book.
What features does your Traveller have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Vin Notch6
2016–2026On the Peugeot Traveller: fitted on every one of the 6 windscreen variants we list; model years 2016–2026.
What it means
A small printed box along the bottom of the windscreen displays your vehicle's VIN (chassis number) for identification purposes.
On your Peugeot Traveller
Present on all Traveller models from 2016 onwards — verified as part of the parts-check process.
Acoustic (Noise reduction)5
2016–2026On the Peugeot Traveller: fitted on 5 of the 6 windscreen variants we list (83%); model years 2016–2026.
What it means
Acoustic laminated glass reduces road and engine noise inside the cabin — identified by 'Acoustic' or 'SoundScreen' labelling or an ear symbol in one corner.
On your Peugeot Traveller
Most Travellers carry this as standard or as a higher-trim option. Look for option code L3P in your service history, or it will be confirmed during the quote.
Green5
2016–2026On the Peugeot Traveller: fitted on 5 of the 6 windscreen variants we list (83%); model years 2016–2026.
What it means
A subtle greenish tint in the windscreen glass that reduces glare and heat while being nearly invisible to the naked eye — standard on most modern vehicles.
On your Peugeot Traveller
Fitted on 80% of Traveller variants; confirmed during the parts check so your replacement matches the original.
Rain Sensor4
2016–2026No calibration after replacementOn the Peugeot Traveller: fitted on 4 of the 6 windscreen variants we list (67%); model years 2016–2026; no calibration after replacement.
What it means
An invisible sensor in the windscreen that automatically activates the wipers when rain is detected, adjusting speed to rainfall intensity.
On your Peugeot Traveller
Found on higher-specification Travellers; check whether your wipers activate on their own in light rain, or confirmed at quote stage.
Camera2
2016–2026Calibration varies by vehicleOn the Peugeot Traveller: fitted on 2 of the 6 windscreen variants we list (33%); model years 2016–2026; calibration varies by vehicle.
What it means
A forward-facing camera mounted behind the windscreen (visible as a small triangular shape in the black trim near the rear-view mirror) that powers Peugeot's Drive Assist Plus driver-assistance systems.
On your Peugeot Traveller
Present on current-generation models and some higher trims — if fitted, it requires static calibration after windscreen replacement using specialist diagnostic equipment.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Bracket For Safety Features1
2016–2026Calibration varies by vehicleOn the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2026; calibration varies by vehicle.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Clear1
2016–2026Calibration varies by vehicleOn the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2026; calibration varies by vehicle.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Coating1
2016–2026On the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2026.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
What it means
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
How to tell
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
Replacement impact
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Defogging Detector1
2024–2026On the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2024–2026.
A defogging detector automatically clears condensation from your windscreen, improving visibility in damp conditions.
What it means
A defogging detector is a sensor that monitors moisture levels on the windscreen and triggers the demister system automatically when condensation builds up. It improves driver visibility and safety in damp or cold weather by preventing manual intervention. The sensor typically sits near the rear-view mirror, positioned to sense moisture accumulation on the glass surface.
How to tell
Check your vehicle's handbook or ask your dealer's service centre whether your model includes an automatic defogging or moisture-sensing demister. Look near the rear-view mirror for a small sensor unit. Some vehicles display an indicator light or message on the dashboard when the system is active.
Replacement impact
The defogging detector does not affect windscreen replacement or require recalibration after fitting. The sensor itself remains in place and continues to function once the new windscreen is installed. No additional calibration, cure time, or specialist procedures are needed.
Dynamic Camera Calibration Process1
2016–2026Calibration varies by vehicleOn the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2026; calibration varies by vehicle.
Dynamic calibration uses road driving to recalibrate your camera after windscreen replacement.
What it means
Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.
How to tell
Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.
Replacement impact
After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Light Sensor1
2016–2026On the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2026.
Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
What it means
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
How to tell
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
Replacement impact
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
Mono Camera1
2016–2026Calibration varies by vehicleOn the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2026; calibration varies by vehicle.
A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
What it means
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
How to tell
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
Replacement impact
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Calibration mix across our Peugeot variants
- 1Dynamic
We confirm the exact procedure for your specific vehicle when you book.
Solar Control1
2016–2026On the Peugeot Traveller: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2026.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
About the Peugeot Traveller
The Peugeot Traveller arrived in 2016 as a modern multi-purpose vehicle, built on the EMP2 platform shared with other Peugeot commercial and passenger models. Most Travellers carry an encapsulated windscreen with a VIN notch along the bottom — meaning the rubber trim arrives pre-bonded to the glass, simplifying the replacement process.
From mid-generation onwards, many variants gained acoustic laminated glass (identifiable by option code L3P in your service records) alongside green-tinted windscreens as standard. Rain sensors for automatic wipers appeared on higher specifications, creating variation across the five active variants in our system.
Camera and calibration requirements are present on some current-generation models equipped with Peugeot's Drive Assist Plus driver-assistance suite. Where fitted, a static calibration procedure using specialist diagnostic equipment is required after windscreen replacement — a process that typically needs workshop access.
Other Peugeot models
Own a different Peugeot? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.
You don't need to know. Our online widget asks a few quick questions — make, model, year, and a couple of feature details — to narrow the variant down. Once booked, our parts check team verifies the exact specification against your VIN before the job is dispatched.
Almost always, yes, where a forward-facing camera is fitted. The technicians in our network include ADAS-calibration-certified specialists — we confirm whether your job needs a workshop or can complete on your driveway when we book.
Your replacement glass matches your original factory specification — same size, features and trim fitment as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.
OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.
Most windscreen replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — for example, windscreens with ADAS cameras needing static calibration, or where access to power, shelter, or controlled conditions makes the work safer indoors. We let you know when we confirm your booking.
Most windscreen replacements take 45–90 minutes of the technician's time. ADAS calibration extends the technician's time on the job, but cure time runs in parallel — so it doesn't usually delay when you can drive. Your technician will confirm exact timings on the day.
Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.
Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.
Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.
Only if your model is equipped with a front camera for the Drive Assist Plus system. If you have automatic wipers triggered by a rain sensor (not a camera), calibration is not needed.
During the quote, our team will identify whether your Traveller carries a camera. If it does, static calibration using specialist diagnostic equipment will be completed after the glass is fitted — typically at a workshop to ensure accuracy.
Acoustic windscreen glass contains a special laminate interlayer that absorbs sound vibrations, reducing road noise, engine roar, and wind noise inside the cabin. Most Travellers from 2016 onwards carry this as standard or as an option on higher trims.
Your replacement glass will match your original specification — whether acoustic or standard — so you'll experience the same noise levels and comfort as before.
A standard windscreen fit (non-camera models) typically takes the technician 45–90 minutes of active work, depending on the vehicle condition and any additional hardware. Camera-equipped models take longer because static calibration is performed after the glass is fitted and adhesive has cured.
Your technician will confirm the specific drive-away time before leaving — this depends on the adhesive used and ambient conditions on the day, not on whether calibration is involved.
Mobile fitting at your home or workplace is the default for most Travellers. If your model requires ADAS calibration (camera-equipped), the entire job — replacement and calibration — is completed at a workshop so the calibration can be done accurately in a controlled environment.
You'll know at the booking stage whether your Traveller needs a workshop visit, and can choose to proceed at a mobile location if your vehicle doesn't require calibration.