Instant quote across 13 Lancer variants spanning three decades, fitted by approved fitters — booked in under two minutes.
Make
Mitsubishi
Model
Lancer
No card required · Free to quote
Price variation across Lancer variants depends on generation, tint type, and the presence of features like rain sensors or sun strips. Earlier models without tints or sensors are typically the most straightforward; later variants with blue tints, sun strips, or sensor brackets incur slightly higher costs due to the complexity of matching the exact specification.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2017 | £423 — £464 | 3 variants | Price my 2017 |
| 2016 | £423 — £464 | 3 variants | Price my 2016 |
| 2015 | £423 — £464 | 3 variants | Price my 2015 |
| 2014 | £405 — £464 | 4 variants | Price my 2014 |
| 2013 | £405 — £464 | 4 variants | Price my 2013 |
| 2012 | £405 — £464 | 4 variants | Price my 2012 |
| 2011 | £405 — £464 | 4 variants | Price my 2011 |
| 2010 | £405 — £464 | 4 variants | Price my 2010 |
| 2009 | £405 — £464 | 4 variants | Price my 2009 |
| 2008 | £405 — £464 | 4 variants | Price my 2008 |
| 2007 | £423 — £464 | 4 variants | Price my 2007 |
| 2006 | £423 — £439 | 2 variants | Price my 2006 |
| 2005 | £423 — £439 | 2 variants | Price my 2005 |
| 2004 | £423 — £439 | 2 variants | Price my 2004 |
| 2003 | £319 — £558 | 5 variants | Price my 2003 |
| 2002 | £297 — £558 | 5 variants | Price my 2002 |
| 2001 | £297 — £558 | 5 variants | Price my 2001 |
| 2000 | £297 — £558 | 5 variants | Price my 2000 |
| 1999 | £297 — £558 | 5 variants | Price my 1999 |
| 1998 | £297 — £558 | 5 variants | Price my 1998 |
| 1997 | £297 — £558 | 5 variants | Price my 1997 |
| 1996 | £297 — £558 | 5 variants | Price my 1996 |
| 1995 | £361 — £566 | 4 variants | Price my 1995 |
| 1994 | £361 — £566 | 4 variants | Price my 1994 |
| 1993 | £361 — £566 | 4 variants | Price my 1993 |
| 1992 | £361 — £566 | 3 variants | Price my 1992 |
| 1991 | £369 — £566 | 4 variants | Price my 1991 |
| 1990 | £369 — £566 | 4 variants | Price my 1990 |
| 1989 | £369 — £566 | 4 variants | Price my 1989 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Lancers can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Showing 1 review from verified Mitsubishi Lancer owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Lancer windscreen replacement takes just a few steps.
Answer a quick online quiz about your model year and trim to identify your exact variant — takes under 60 seconds.
Our parts team confirms your windscreen specification, including any tint, sun strip, or sensor brackets.
You're matched with a local technician approved by UKCG and offered a mobile or workshop appointment.
On the day, your fitter removes the damaged windscreen, fits the matched replacement, and confirms the drive-away time before leaving.
You're covered by a two-year warranty on workmanship and glass quality.
Most Lancer jobs are completed within a couple of hours, and your car is ready to drive once the adhesive cure time is confirmed by your fitter.
Most Lancer windscreen replacements are completed at your preferred location — either mobile at home or at a workshop. Because the Lancer's production span pre-dates modern ADAS systems, few variants in our catalogue carry windscreen-mounted cameras, so calibration is rarely needed.
If your specific variant does include a forward-facing camera for driver assistance features, your technician will confirm this during the booking process and may recommend a workshop appointment to ensure any calibration is completed alongside the glass replacement.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Blue-tinted windscreens reduce glare and heat while maintaining a subtle, modern appearance.
A blue tint is a light coloration applied to the windscreen glass, usually during manufacture. It reduces solar heat transmission and glare from sunlight, particularly on bright days or when driving into the sun. The tint is integral to the glass itself — not a separate film — and is chosen by the vehicle manufacturer to balance comfort, visibility, and aesthetic consistency with the vehicle's side windows and rear window. Most vehicles come with a green or blue tint as standard; the choice depends on the manufacturer's design and regional climate considerations.
Check your side windows by rolling one halfway down and holding a white piece of paper behind the glass. If you see a blue tint reflected in the glass, your windscreen will have the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen tint specification. The tint is visible when comparing the windscreen to clear glass, though it may be subtle and harder to spot on overcast days.
Blue-tinted replacement windscreens must match the original tint to maintain visual consistency with your side and rear windows. Most replacement glass is available in the correct tint through OE (original equipment) suppliers. There is no calibration requirement related to tint. The tint does not affect fitting time, cure time, or drive-away schedules. Ensure the replacement windscreen is specified with the blue tint to avoid a mismatched appearance.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
A glass variant made specifically for right-hand-drive vehicles like UK cars, with brackets and sensors positioned for the driver's side.
Right-hand-drive glass is a windscreen (or other glass panel) manufactured to the correct specification for vehicles where the steering wheel and driver controls are on the right side of the car. The key difference isn't the glass itself but the position of brackets, sensor mounting pads, and sometimes a VIN (Vehicle Identification Number) notch. These are placed on the dashboard side to align with right-hand-drive vehicle architecture. Using the correct variant ensures all safety systems, mounting points, and sensor arrays sit in the right place when the glass is fitted.
Check your vehicle's specification sheet or service handbook — it will confirm 'RHD' (right-hand drive). Ask your dealership or service centre which windscreen variant they stock for your model. If you're unsure, provide us with your registration number when you book; we'll identify the correct part.
UKCG stocks the UK-specific right-hand-drive variant, so all brackets, sensors, and mounting points align correctly during fitting. Using a left-hand-drive part on a right-hand-drive vehicle would result in misalignment of camera brackets, rain sensors, or other dashboard-mounted components. We confirm you receive the correct RHD variant before dispatch.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Mitsubishi Lancer has been in continuous production since 1989, spanning multiple generations from the compact saloon era through to its final generation in 2017. Early models carry straightforward laminated windscreens with minimal features, while later generations introduced green and blue tints as standard across most variants.
From the mid-2000s onwards, some higher-spec Lancer models gained blue sun strips — a gradient tint at the top of the windscreen that reduces glare without obscuring the driver's main field of view. More recent Lancers may also feature rain sensors for automatic wiper activation.
The Lancer's long production run means generation and trim level are key to identifying your exact glass specification. The quote process will pinpoint your variant and confirm whether your windscreen carries tint, a sun strip, or any sensor equipment.
Own a different Mitsubishi? We've got you — every variant, every year.
The questions customers ask us most often.
