Andrew E.
Verified on Trustpilot20 Nov 2026
2019 Dacia Logan
Screening
Excellent service from the booking to screen fitting by a very pleasant young engineer. Thank you to all involved.
Instant quote across Fiat 500e variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
FIAT
Model
500e
No card required · Free to quote
Prices vary primarily with ADAS calibration complexity and whether solar-control glass is fitted to the rear row. Earlier 2020–2021 models and later variants with standard audio trim are typically the most affordable options. Mid-range trims with solar control and newer model years command higher prices due to the additional glass specification and calibration requirements.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £810 — £817 | 2 variants | Price my 2026 |
| 2025 | £810 — £817 | 2 variants | Price my 2025 |
| 2024 | £810 — £817 | 2 variants | Price my 2024 |
| 2023 | £810 — £817 | 2 variants | Price my 2023 |
| 2022 | £810 — £817 | 2 variants | Price my 2022 |
| 2021 | £810 — £817 | 2 variants | Price my 2021 |
| 2020 | £810 — £817 | 2 variants | Price my 2020 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older FIAT 500e models can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,505 Trustpilot reviews.
Booking your Fiat 500e windscreen replacement takes just a few straightforward steps.
Use our online quote tool to identify your exact 500e variant — the guided quiz takes about a minute and confirms all your glass features including camera and rain sensor.
Check the instant price and book a fitting slot at a time that suits you — mobile fitting at your address is the default, though some 500e jobs requiring camera calibration may be scheduled at a workshop.
We match you with an approved technician in your area who stocks the correct Fiat windscreen and has the equipment for ADAS recalibration.
On fitting day, the technician replaces your windscreen, performs the camera recalibration, and confirms your drive-away time before leaving — typically a couple of hours from start to finish.
Your replacement is covered by a two-year warranty on workmanship and glass quality.
From quote to booked appointment, the whole process usually takes less than two minutes online.
Most Fiat 500e windscreen replacements start as mobile visits — the technician comes to your home or workplace. However, because all 500e models include the Co-Driver ADAS camera, camera recalibration is required after fitting.
Some technicians can perform dynamic (drive-based) recalibration on the road, whilst others use a workshop-based setup. UKCG schedules the entire job — replacement plus calibration — at a single location to ensure calibration is completed correctly and you can drive away safely.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the FIAT 500e: fitted on every one of the 2 windscreen variants we list; model years 2020–2026.
Laminated glass with an acoustic interlayer that dampens road and engine noise, creating a quieter cabin.
All 2020+ Fiat 500e windscreens feature acoustic laminated glass as standard; no trim distinction.
On the FIAT 500e: fitted on every one of the 2 windscreen variants we list; model years 2020–2026; calibration varies by vehicle.
A forward-facing ADAS camera mounted behind the windscreen for Fiat's Co-Driver traffic-sign detection and driver assistance functions.
Standard on all 2020+ 500e models; confirmed by the presence of a triangular bracket in the top centre of the windscreen. Windscreen replacement requires camera recalibration.
On the FIAT 500e: fitted on every one of the 2 windscreen variants we list; model years 2020–2026.
A subtle green tint in the windscreen laminate that reduces solar heat and glare whilst maintaining visibility.
Standard on all 500e variants; the tint is factory-applied and not a trim option — confirmed during your quote.
On the FIAT 500e: fitted on every one of the 2 windscreen variants we list; model years 2020–2026; no calibration after replacement.
Automatic wiper activation when moisture is detected on the windscreen — no manual adjustment needed in rain.
All 500e variants include rain-sensing wipers as part of the standard Co-Driver suite from 2020 onwards.
On the FIAT 500e: fitted on every one of the 2 windscreen variants we list; model years 2020–2026.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
On the FIAT 500e: fitted on 1 of the 2 windscreen variants we list (50%); model years 2020–2026.
Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
On the FIAT 500e: fitted on 1 of the 2 windscreen variants we list (50%); model years 2020–2026.
A solar-reflective coating on the windscreen that absorbs infrared radiation, helping to keep the cabin cooler in strong sunlight.
Solar control is fitted to select 500e trims and higher specification models; confirmed during your online quote if present on your variant.
The Fiat 500e is Fiat's fully electric city car, launched in 2020 as a modern reimagining of the iconic 500 nameplate. Its compact dimensions and contemporary design make it a popular choice for urban drivers across the UK.
All 500e windscreens feature acoustic laminated glass to reduce cabin noise — a standard fitted from launch. Every variant also includes a forward-facing ADAS camera and rain-sensing wipers as part of Fiat's Co-Driver system, which uses camera and sensor technology to detect traffic signs and support driver assistance functions.
Windscreen replacement on the 500e requires camera recalibration after fitting to restore the system's original accuracy. This is a dynamic (drive-based) recalibration carried out by the technician after the glass is bonded, using Fiat's diagnostic procedures.
Some FIAT 500e windscreens carry a camera that may need recalibrating after fitting. Read about ADAS calibration.
Not sure how it works? Our windscreen replacement page explains booking and fitting.
Own a different FIAT? We've got you — every variant, every year.
The questions customers ask us most often.
You don't need to know. Our online widget asks a few quick questions — make, model, year, and a couple of feature details — to narrow the variant down. Once booked, our parts check team verifies the exact specification against your VIN before the job is dispatched.
Almost always, yes, where a forward-facing camera is fitted. The technicians in our network include ADAS-calibration-certified specialists — we confirm whether your job needs a workshop or can complete on your driveway when we book.
Your replacement glass matches your original factory specification — same size, features and trim fitment as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.
OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.
Most windscreen replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — for example, windscreens with ADAS cameras needing static calibration, or where access to power, shelter, or controlled conditions makes the work safer indoors. We let you know when we confirm your booking.
Most windscreen replacements take 45–90 minutes of the technician's time. ADAS calibration extends the technician's time on the job, but cure time runs in parallel — so it doesn't usually delay when you can drive. Your technician will confirm exact timings on the day.
Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.
Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.
Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.
Yes. All 500e models from 2020 onwards carry Fiat's Co-Driver ADAS camera for traffic-sign recognition and driver assistance. Replacing the windscreen requires dynamic camera recalibration afterwards to restore the system's accuracy.
Your technician performs this recalibration using Fiat's diagnostic procedures, either during a workshop visit or via a guided drive route if mobile equipment permits. The recalibration runs in parallel with adhesive cure, so it does not extend your drive-away time.
Yes, all 2020+ Fiat 500e windscreens are fitted with acoustic laminated glass as standard, regardless of trim level. This reduces cabin noise from traffic and wind, contributing to the quiet EV driving experience the 500e is known for.
Solar-control glass is available on select 500e variants, typically higher-specification or newer-model-year trims. During your online quote, the system will show whether your specific variant includes solar control; if it does, your replacement will match that specification.
Technician time typically runs longer than a standard non-ADAS windscreen because of the camera recalibration work. The full job — replacement, calibration setup, and final checks — usually completes within a couple of hours, though times can vary depending on the technician's equipment and workshop access.
Your fitter will confirm the specific drive-away time before leaving, derived from the adhesive product used and ambient conditions on the day.