Instant quote across eight Panda variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
FIAT
Model
Panda
No card required · Free to quote
Prices vary with generation and ADAS equipment. Earlier Pandas without camera systems are typically the most affordable to replace. Later models with Co-Driver ADAS carry higher costs due to the camera recalibration required after fitting.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £317 — £545 | 4 variants | Price my 2026 |
| 2025 | £317 — £545 | 4 variants | Price my 2025 |
| 2024 | £317 — £545 | 4 variants | Price my 2024 |
| 2023 | £317 — £545 | 4 variants | Price my 2023 |
| 2022 | £317 — £545 | 4 variants | Price my 2022 |
| 2021 | £317 — £545 | 4 variants | Price my 2021 |
| 2020 | £317 — £545 | 4 variants | Price my 2020 |
| 2019 | £317 — £545 | 4 variants | Price my 2019 |
| 2018 | £317 — £545 | 4 variants | Price my 2018 |
| 2017 | £317 — £545 | 4 variants | Price my 2017 |
| 2016 | £317 — £545 | 4 variants | Price my 2016 |
| 2015 | £317 — £545 | 4 variants | Price my 2015 |
| 2014 | £317 — £545 | 4 variants | Price my 2014 |
| 2013 | £317 — £545 | 4 variants | Price my 2013 |
| 2012 | £317 — £545 | 4 variants | Price my 2012 |
| 2011 | £262 — £545 | 3 variants | Price my 2011 |
| 2010 | £262 — £262 | 1 variant | Price my 2010 |
| 2009 | £262 — £262 | 1 variant | Price my 2009 |
| 2008 | £262 — £262 | 1 variant | Price my 2008 |
| 2007 | £262 — £262 | 1 variant | Price my 2007 |
| 2006 | £262 — £262 | 1 variant | Price my 2006 |
| 2005 | £262 — £262 | 1 variant | Price my 2005 |
| 2004 | £262 — £262 | 1 variant | Price my 2004 |
| 2003 | £216 — £216 | 1 variant | Price my 2003 |
| 2002 | £216 — £216 | 1 variant | Price my 2002 |
| 2001 | £216 — £216 | 1 variant | Price my 2001 |
| 2000 | £216 — £216 | 1 variant | Price my 2000 |
| 1999 | £216 — £216 | 1 variant | Price my 1999 |
| 1998 | £216 — £216 | 1 variant | Price my 1998 |
| 1997 | £216 — £216 | 1 variant | Price my 1997 |
| 1996 | £216 — £216 | 1 variant | Price my 1996 |
| 1995 | £216 — £448 | 2 variants | Price my 1995 |
| 1994 | £216 — £448 | 2 variants | Price my 1994 |
| 1993 | £216 — £448 | 2 variants | Price my 1993 |
| 1992 | £216 — £448 | 2 variants | Price my 1992 |
| 1991 | £216 — £448 | 2 variants | Price my 1991 |
| 1990 | £216 — £448 | 2 variants | Price my 1990 |
| 1989 | £216 — £448 | 2 variants | Price my 1989 |
| 1988 | £216 — £448 | 2 variants | Price my 1988 |
| 1987 | £216 — £448 | 2 variants | Price my 1987 |
| 1986 | £216 — £448 | 2 variants | Price my 1986 |
| 1985 | £216 — £448 | 2 variants | Price my 1985 |
| 1984 | £216 — £448 | 2 variants | Price my 1984 |
| 1983 | £216 — £448 | 2 variants | Price my 1983 |
| 1982 | £216 — £448 | 2 variants | Price my 1982 |
| 1981 | £216 — £448 | 2 variants | Price my 1981 |
| 1980 | £216 — £448 | 2 variants | Price my 1980 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Pandas can still be booked.
Showing 4 reviews from verified FIAT Panda owners. Across the whole of UK Car Glass, 4.82/5 from 1,493 Trustpilot reviews.
Booking your Panda windscreen replacement is straightforward — here's what happens from start to finish.
Answer a short quiz about your Panda's year, trim, and features — takes about a minute. Our system identifies the exact windscreen variant you need.
Receive an instant quote and book online, choosing a time that suits you.
A technician from our network is matched to your booking and confirms the job details.
On fitting day, the technician removes your old windscreen, inspects the frame for any issues, and bonds the replacement glass using factory-spec adhesive.
If your Panda has a Co-Driver camera, the technician recalibrates it using the appropriate procedure before releasing the vehicle.
You'll receive a two-year warranty covering workmanship and glass quality.
Mobile fitting at your address is the default — or choose a workshop if you prefer.
Most Panda windscreen replacements can be fitted at your address as a mobile service. However, if your model includes a Co-Driver camera system, the recalibration procedure is scheduled at a workshop to ensure the safety system is correctly aligned using the proper equipment and procedure.
We never split a job across locations — if calibration is needed, the complete replacement and recalibration happen in one visit at the workshop. Your technician will confirm whether your specific variant requires workshop fitting when you book.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the FIAT Panda: fitted on 6 of the 7 windscreen variants we list (86%); model years 1980–2026.
A subtle green tint in the glass, standard on most modern Pandas, which reduces glare and UV transmission.
This tint is faint and often goes unnoticed. Confirmed during the quote process when your variant is identified.
On the FIAT Panda: fitted on 3 of the 7 windscreen variants we list (43%); model years 2011–2026.
Acoustic laminate in the windscreen absorbs road and wind noise, creating a quieter cabin — look for the word 'Acoustic' or an ear symbol printed on the glass.
Found on higher-trim or more recent Panda models. Confirmed during the quote.
On the FIAT Panda: fitted on 2 of the 7 windscreen variants we list (29%); model years 2004–2026.
A solar-coated windscreen that absorbs the sun's infrared rays, helping to keep the cabin cooler in warm weather.
Optional on some mid-range and higher trims. Confirmed during the quote process.
On the FIAT Panda: fitted on 1 of the 7 windscreen variants we list (14%); model years 1980–1995.
A blue-tinted gradient band across the top of the windscreen that reduces sun glare from above without affecting your main field of view.
Found on select Panda variants. If your car has one, the replacement must be the sun-strip variant to match the original.
On the FIAT Panda: fitted on 1 of the 7 windscreen variants we list (14%); model years 2011–2026; calibration varies by vehicle.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
On the FIAT Panda: fitted on 1 of the 7 windscreen variants we list (14%); model years 2011–2026; calibration varies by vehicle.
A forward-facing camera mounted behind the windscreen as part of the Co-Driver ADAS safety system, detecting traffic signs and assisting with collision prevention.
Present on newer Pandas from 2020 onwards fitted with Co-Driver. You'll see a triangular lens area in the black field near the rear-view mirror.
On the FIAT Panda: fitted on 1 of the 7 windscreen variants we list (14%); model years 1980–2003; calibration varies by vehicle.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
On the FIAT Panda: fitted on 1 of the 7 windscreen variants we list (14%); model years 2011–2026.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
On the FIAT Panda: fitted on 1 of the 7 windscreen variants we list (14%); model years 2011–2026; bespoke calibration.
LIDAR helps your car sense its surroundings for advanced safety and driver-assistance features.
LIDAR (Light Detection and Ranging) is a sensor technology that uses laser beams to detect objects, obstacles, and road features in three dimensions. It creates a detailed map of the vehicle's surroundings in real time, enabling advanced driver-assistance systems (ADAS) such as adaptive cruise control, collision avoidance, and autonomous emergency braking. LIDAR complements camera and radar systems by providing precise distance and depth information, even in poor visibility or low-light conditions. It is increasingly fitted to modern vehicles as part of their safety and autonomous-capability infrastructure.
Check your vehicle's handbook or contact your dealership to confirm LIDAR fitment. LIDAR sensors are typically mounted on the roof, bumpers, or within the windscreen/rear-window frame area. You may see reference to 'LIDAR', 'laser radar', or specific safety-feature names (e.g. 'adaptive cruise control', 'autonomous emergency braking') that rely on LIDAR in your documentation.
If your windscreen or rear window houses or frames a LIDAR sensor, replacement requires careful handling to preserve or recalibrate the sensor post-fit. LIDAR calibration procedures vary significantly by vehicle make, model, and year—some require static alignment using specialist target equipment, others demand dynamic road-drive procedures, and some use a combination. We identify the exact calibration requirement when we look up your specific vehicle and confirm it with you before booking.
The Fiat Panda has been in continuous production since 1980, evolving through four distinct generations. Early models carried straightforward laminated windscreens with minimal features, while later generations introduced tinted glass as standard and progressive refinements to trim and sealing.
From the 2020 model year onwards, newer Pandas equipped with the Co-Driver ADAS suite feature a forward-facing camera mounted behind the windscreen. This requires camera recalibration following replacement — a dynamic (drive-based) procedure that ensures the safety systems function correctly after the glass is fitted.
Own a different FIAT? We've got you — every variant, every year.
The questions customers ask us most often.
