Instant quote across five Bravo variants from 1996–2014, fitted by approved fitters — booked in under two minutes.
Make
FIAT
Model
Bravo
No card required · Free to quote
Price variation reflects the generation leap and trim-level ADAS adoption across the Bravo range. Early 1990s–2000s models without rain sensors or acoustic options are the most affordable, whilst later variants with solar control, encapsulated trim, and sensor integration command slightly higher costs due to the added complexity at fitting.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2010 | £430 — £430 | 1 variant | Price my 2010 |
| 2009 | £430 — £430 | 1 variant | Price my 2009 |
| 2008 | £430 — £430 | 1 variant | Price my 2008 |
| 2007 | £237 — £430 | 3 variants | Price my 2007 |
| 2006 | £237 — £257 | 2 variants | Price my 2006 |
| 2005 | £237 — £257 | 2 variants | Price my 2005 |
| 2004 | £237 — £257 | 2 variants | Price my 2004 |
| 2003 | £237 — £257 | 2 variants | Price my 2003 |
| 2002 | £237 — £257 | 2 variants | Price my 2002 |
| 2001 | £237 — £257 | 2 variants | Price my 2001 |
| 2000 | £237 — £257 | 2 variants | Price my 2000 |
| 1999 | £237 — £257 | 2 variants | Price my 1999 |
| 1998 | £237 — £257 | 2 variants | Price my 1998 |
| 1997 | £237 — £257 | 2 variants | Price my 1997 |
| 1996 | £237 — £257 | 2 variants | Price my 1996 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Bravos can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,487 Trustpilot reviews.
Booking a Bravo windscreen replacement with UKCG takes three simple steps: instant online quote, technician match, and a fitting appointment at a time that suits you.
Start with our online quote widget — answer a few quick questions about your Bravo variant (year, trim, features) and receive an instant price estimate in under 60 seconds.
Once booked, our team carries out a parts check to confirm your exact glass specification — including solar-control tint, sensor pads, and encapsulation type.
You're matched with an approved fitter near you who will replace your windscreen at your home or workplace (or a workshop, if you prefer).
On fitting day, the technician arrives with your matched glass, removes the old windscreen, and bonds the new one into place — typically within 45–90 minutes of active work time.
Your fitter will confirm the minimum drive-away time before leaving, based on the adhesive used and weather conditions.
You're covered by a two-year warranty on workmanship and glass quality, plus access to our support team if you have any questions.
From quote to fitted windscreen, the process is designed to be quick, transparent, and hassle-free.
Most Bravo windscreen replacements can be fitted at your home or workplace as standard mobile service. However, if your Bravo is one of the later variants equipped with a rain sensor, the technician may need to access power or a controlled environment to test the sensor after fitting — this is confirmed during your booking.
If a workshop visit is needed, your technician will arrange the fitting at a convenient location; there is no separate calibration requirement for Bravo models in our active catalogue, so the job is completed in one visit.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
A green-tinted band at the windscreen's top edge that reduces glare from sunlight above.
A green sun strip is a graduated tint band integrated into the windscreen's laminate at the upper edge. It filters intense sunlight and glare from above — particularly useful on motorways and in bright conditions — whilst maintaining clarity through the main viewing area below. The tint is permanent, fused into the laminate layer during manufacture, and cannot be applied or removed afterwards. Sun strips are a windscreen-only feature because they must be built into the laminate during production; side and rear glass cannot carry them as they are typically toughened rather than laminated.
Look at the top edge of your windscreen from the inside. A sun strip appears as a distinct green-tinted gradient band that fades from darker at the very top to clear below. It is visible whether the car is parked or moving. You can also check your vehicle's specification sheet or ask your dealership or current service centre to confirm whether your windscreen includes a sun strip.
The replacement windscreen must be the green sun strip variant to match your original. This is not a post-fit addition; it must be ordered as part of the glass itself. Availability is usually straightforward for current and recent models from major manufacturers, though older or less common variants may require a longer lead time. The sun strip does not affect calibration requirements or cure time — it is simply a laminate feature and does not complicate the fitting process.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Fiat Bravo has been in continuous production since 1996, spanning three distinct generations that define its windscreen characteristics. Early models carry straightforward laminated windscreens with basic trim, whilst later variants from the mid-2000s onwards feature solar-control glass as standard, reducing cabin heat and glare.
From around 2010 onwards, select higher-trim Bravo models introduced rain sensors and acoustic interlayers for noise reduction. Encapsulation — a pre-fitted rubber gasket moulded directly onto the glass edges — became standard on later variants, simplifying the replacement process by arriving as a glass-plus-trim unit.
Own a different FIAT? We've got you — every variant, every year.
The questions customers ask us most often.
