MH
Michael H.
Verified on Trustpilot30 Mar 2023
Great service
Showed up on time Fast & friendly service No clean up required after fitting the new windshield 100% I would use again, hope I don’t have too, but you never know
Peugeot Partner rear window replacement — booked online.
Instant quote across 19 Partner variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £235 to £580
4.82 / 5 ·
1,422 Trustpilot reviews
Get your quote
Under 60 secondsMake
Peugeot
Model
Partner
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, factory-spec match
- 2-year workmanship warranty
Peugeot Partner rear window price, by year
Pricing varies across the Partner's 19 active variants, reflecting generational differences and the presence of optional features such as heated rear glass, tinting options, and privacy coatings. Earlier models without heating elements are typically the most economical, whilst newer variants with integrated heating or specialist tints carry higher replacement costs. The exact specification of your Partner is confirmed during the quote process.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £244 — £580 | 6 variants | Price my 2026 |
| 2025 | £244 — £580 | 6 variants | Price my 2025 |
| 2024 | £244 — £580 | 6 variants | Price my 2024 |
| 2023 | £244 — £580 | 6 variants | Price my 2023 |
| 2022 | £244 — £580 | 6 variants | Price my 2022 |
| 2021 | £244 — £580 | 6 variants | Price my 2021 |
| 2020 | £244 — £580 | 6 variants | Price my 2020 |
| 2019 | £244 — £580 | 6 variants | Price my 2019 |
| 2018 | £244 — £580 | 6 variants | Price my 2018 |
| 2017 | £244 — £580 | 6 variants | Price my 2017 |
| 2016 | £244 — £580 | 6 variants | Price my 2016 |
| 2015 | £244 — £580 | 6 variants | Price my 2015 |
| 2014 | £244 — £580 | 6 variants | Price my 2014 |
| 2013 | £244 — £580 | 6 variants | Price my 2013 |
| 2012 | £244 — £580 | 6 variants | Price my 2012 |
| 2011 | £244 — £580 | 6 variants | Price my 2011 |
| 2010 | £244 — £580 | 6 variants | Price my 2010 |
| 2009 | £244 — £580 | 6 variants | Price my 2009 |
| 2008 | £235 — £580 | 16 variants | Price my 2008 |
| 2007 | £235 — £285 | 10 variants | Price my 2007 |
| 2006 | £235 — £285 | 13 variants | Price my 2006 |
| 2005 | £235 — £285 | 13 variants | Price my 2005 |
| 2004 | £235 — £285 | 13 variants | Price my 2004 |
| 2003 | £235 — £285 | 13 variants | Price my 2003 |
| 2002 | £235 — £285 | 13 variants | Price my 2002 |
| 2001 | £235 — £285 | 13 variants | Price my 2001 |
| 2000 | £235 — £285 | 13 variants | Price my 2000 |
| 1999 | £235 — £285 | 13 variants | Price my 1999 |
| 1998 | £235 — £285 | 13 variants | Price my 1998 |
| 1997 | £235 — £285 | 13 variants | Price my 1997 |
| 1996 | £235 — £265 | 4 variants | Price my 1996 |
| 1995 | £262 — £265 | 3 variants | Price my 1995 |
| 1994 | £262 — £265 | 3 variants | Price my 1994 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Partners can still be booked.
What Peugeot Partner owners say
4.83/5 across 6 verified Peugeot Partner owners
Showing 6 reviews from verified Peugeot Partner owners. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
What to expect during your Peugeot Partner rear window replacement
Rear window replacement with UKCG follows a simple, guided process from quote through to fitting.
- 1
Complete an instant online quote using our guided quiz — takes about 60 seconds. You'll describe your Partner's age, generation, and rear window features.
- 2
Our parts team verifies your exact glass specification and matches you with an approved fitter in your area.
- 3
Your fitter books a convenient time — mobile replacement at your address is our standard, or you can choose a workshop if you prefer.
- 4
On the day, your fitter replaces the rear window (typically 30–60 minutes of work) and removes accessible broken glass shards. A shattered rear window means shard cleanup is part of the job, but small pieces can lodge in places beyond immediate reach.
- 5
We recommend a professional valet afterwards for thorough interior detailing and any stubborn glass fragments.
- 6
Your replacement glass comes with a two-year warranty covering workmanship and glass quality.
Book in under two minutes via our online quote tool, or contact us for a bespoke discussion if your Partner has bespoke glass configurations.
Mobile fitting or workshop visit for your Partner?
The Peugeot Partner's rear window is typically a straightforward replacement and can be fitted mobile at your address in most cases. Your chosen fitter will assess the job location and confirm whether mobile fitting is suitable — if access, weather, or the extent of shard cleanup suggests a workshop environment would be safer, the job can be rescheduled there.
Unlike windscreen replacements on camera-equipped vehicles, the Partner's rear window does not require ADAS calibration, so there's no technical reason a workshop is mandatory.
We confirm the specific answer for your vehicle when you book.
What features does your Partner have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green10
1994–2026Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Left8
1994–2026Left side window — choose this if your car has a left-side door window that needs replacing.
What it means
The left side window is the glass panel in the door on the driver's side of the vehicle (or front passenger side in right-hand-drive markets where the driver sits on the right). This is an operable window — it rolls up and down using the window mechanism in the door. Unlike the windscreen or rear window, side windows are typically toughened glass, which means they shatter into small fragments if broken rather than cracking into large shards. Replacing a left side window is a straightforward job that doesn't involve adhesive bonding.
How to tell
Look at the driver's side of your car — the left side window is the glass panel in the front-left door that you can wind down. If this glass is cracked, chipped, or missing, you need a left side window replacement. You can also check your vehicle's documentation or ask your dealer's service centre to confirm which positions are affected if you're unsure.
Replacement impact
Left side window replacement is typically faster than windscreen work because there is no adhesive bonding and no calibration involved. The glass is held in place by clips, seals, and the door mechanism. However, if the window has shattered, glass fragments may lodge in hard-to-reach areas inside the door or trim. We recommend a professional interior valet afterwards to ensure all shards are thoroughly removed from seat mechanisms, seatbelts, and door channels.
Right7
1994–2026Your vehicle has two rear doors, so a four-door configuration.
What it means
This attribute identifies whether your vehicle is a four-door or two-door model. Four-door cars have a rear door on both the driver and passenger sides; two-door cars have only front doors. This classification affects which glass panels are present in your vehicle — four-door models include rear side windows and rear doors, whilst two-door models do not. Knowing your door configuration helps us identify the correct glass type and position for your windscreen or window replacement.
How to tell
Count the doors on your vehicle. If you can open a door behind the front passenger and driver seats on both sides, you have a four-door (right) configuration. If only the front doors open, you have a two-door model. You can also check your vehicle's documentation or ask your dealer or service centre — they'll confirm the exact door count in seconds.
Replacement impact
Four-door models have rear side windows and rear doors that may require replacement. This affects the range of glass panels we can supply and fit for you. All standard glass types in four-door cars — windscreen, rear window, front and rear side windows — are within our service scope and follow the same replacement and fitting process as two-door variants. The door configuration itself does not alter calibration or cure-time procedures.
Clear6
1994–2008Calibration varies by vehicleClear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Unheated6
1996–2026A rear window without heating elements — selected when the model's standard specification includes a heated rear glass option.
What it means
An unheated rear window is a variant specification where the rear glass does not include integrated electric heating wires. Many vehicle models offer heated rear glass as standard or as an option to demist the window quickly in cold or wet conditions. An unheated rear window omits this feature entirely. It is a cost-conscious choice and remains fully functional for visibility and weather protection — demisting simply takes longer and relies on the vehicle's cabin heating system alone.
How to tell
Check your vehicle's specification sheet or service documentation. If your model range lists 'heated rear window' or 'rear demister' as a standard or optional feature and your car does not have it, you have an unheated variant. You can also look at the rear window itself — a heated rear window shows a faint pattern of horizontal heating wires when you look closely at the glass. An unheated window appears completely clear with no wire pattern visible.
Replacement impact
Replacement glass must match your original specification. If your vehicle has an unheated rear window, the replacement must also be unheated — you cannot fit a heated variant without additional wiring and control-module work, which falls outside standard glass replacement scope. Conversely, if heated glass is standard for your model and you wish to stay unheated, confirm this choice at booking. No calibration is involved with rear-window replacement.
Dark Green3
2008–2026Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
What it means
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
How to tell
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Replacement impact
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
Solar Control3
2008–2026Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Fitting Hardware1
2008–2026Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
What it means
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
How to tell
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Replacement impact
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Open1
2008–2026An opening pane with hinged hardware, typically on rear quarters or van sides.
What it means
An opening glass pane is a hinged or pivoting section of bodyglass designed to swing or tilt outward for ventilation or access. Commonly found on rear quarters of estates or vans, and on van side panels. Unlike fixed side windows or windscreens, opening panes are part of the vehicle's passive ventilation system and allow airflow without opening a door or window. The hinge and frame hardware are integral to the feature's function.
How to tell
Check your vehicle's side and rear quarter panels for hinged glass sections that swing outward. Ask your dealer or service centre whether your model includes rear quarter vents or van-side opening panels. Your handbook will list ventilation features. Opening panes are visually distinct from sliding or rolling windows — they pivot on visible hinges rather than moving vertically or horizontally.
Replacement impact
UKCG handles opening-pane replacement on a bespoke basis — please contact us for a quote rather than using the automated quote tool. Replacement includes the glass pane and matching hinge hardware where supplied. Fitting time is typically brief as there is no adhesive cure or calibration required. The pane is held in place by mechanical hinges and seals, so you can use the vehicle immediately after fitting.
About the Peugeot Partner
The Peugeot Partner has been in continuous production since 1994, serving as a practical light commercial vehicle across multiple generations. Early variants carry straightforward toughened rear windows, whilst later generations introduce green-tinted glass and optional heating elements on certain trim levels.
From the mid-2010s onwards, higher-specification variants began featuring optional heated rear windows and enhanced glass coatings. Recent Partner models continue this evolution, with some variants offering privacy glass or integrated features in the rear window specification.
Other Peugeot models
Own a different Peugeot? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.