Rear window replacement for your Nissan 350Z booked online in under two minutes, fitted by approved specialists near you.
Make
Nissan
Model
350z
No card required · Free to quote
Rear-window replacement costs vary with generation and feature complexity. Models with heated rear glass or integrated antenna connections require more detailed parts matching and may involve slightly higher fitting costs due to the additional connections. Specialist technicians on our network assess your specific variant during the quote process.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2020 | £593 — £593 | 1 variant | Price my 2020 |
| 2019 | £593 — £593 | 1 variant | Price my 2019 |
| 2018 | £593 — £593 | 1 variant | Price my 2018 |
| 2017 | £593 — £593 | 1 variant | Price my 2017 |
| 2016 | £593 — £593 | 1 variant | Price my 2016 |
| 2015 | £593 — £593 | 1 variant | Price my 2015 |
| 2014 | £593 — £593 | 1 variant | Price my 2014 |
| 2013 | £593 — £593 | 1 variant | Price my 2013 |
| 2012 | £593 — £593 | 1 variant | Price my 2012 |
| 2011 | £593 — £593 | 1 variant | Price my 2011 |
| 2010 | £593 — £593 | 1 variant | Price my 2010 |
| 2009 | £593 — £593 | 1 variant | Price my 2009 |
| 2008 | £593 — £593 | 1 variant | Price my 2008 |
| 2007 | £593 — £593 | 1 variant | Price my 2007 |
| 2006 | £593 — £593 | 1 variant | Price my 2006 |
| 2005 | £593 — £593 | 1 variant | Price my 2005 |
| 2004 | £593 — £593 | 1 variant | Price my 2004 |
| 2003 | £593 — £593 | 1 variant | Price my 2003 |
| 2002 | £593 — £593 | 1 variant | Price my 2002 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 350zs can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking and fitting your 350Z's rear window is straightforward.
Start with our quick online quote — answer a few questions about your model year and features, and you'll receive a price estimate in under 60 seconds.
Once booked, our team performs a parts check to confirm your replacement glass matches your factory specification, including any heated or antenna elements.
You're matched with an approved specialist local to you, who will visit your chosen location (mobile at your address or at a workshop, your preference).
The technician fits the rear window, typically completing the job in 30–60 minutes depending on your vehicle's configuration.
We recommend a professional valet afterwards to ensure any small glass shards lodged in trim or seat areas are fully removed — a shattered rear window leaves debris that extends beyond the fitter's accessible reach.
Your replacement glass is covered by a two-year warranty against manufacturing defects and workmanship issues.
If you have questions before or after booking, our team is available to help.
The 350Z's rear-window replacement is typically completed at your preferred location — mobile at home or at a workshop — depending on your schedule and the technician's local availability. Since the 350Z does not carry windscreen-mounted ADAS calibration systems, there is no requirement for a workshop visit for safety-critical calibration, making mobile fitting a straightforward option for most customers.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
The Nissan 350Z has been in production since 2002, evolving through two main generations with consistent rear-window design. Early models carry straightforward toughened rear glass, while later variants from the mid-2000s onwards may include integrated heating elements and antenna connections.
The 350Z's rear window is a key structural component due to the model's distinctive fastback profile. Replacement glass must match your factory specification, including any heating or antenna features, to restore both functionality and safety.
Own a different Nissan? We've got you — every variant, every year.
The questions customers ask us most often.
