Zak S.
Trustpilot15 Jul 2022
Great Service
Easy. Quick. Best prices. Thank you UK Car Glass!
Instant quote across 8 Berlingo variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Citroen
Model
Berlingo
No card required · Free to quote
Price variation across Berlingo variants depends largely on generation and ADAS equipment presence. Early-2000s models without advanced driver assistance are typically the most affordable; newer variants with Highway Driver Assist or Safety Pack Plus carry higher calibration costs. Solar-control rear-window options on mid-range trims also influence pricing.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £261 — £541 | 4 variants | Price my 2026 |
| 2025 | £261 — £541 | 4 variants | Price my 2025 |
| 2024 | £261 — £541 | 4 variants | Price my 2024 |
| 2023 | £261 — £541 | 4 variants | Price my 2023 |
| 2022 | £261 — £541 | 4 variants | Price my 2022 |
| 2021 | £261 — £541 | 4 variants | Price my 2021 |
| 2020 | £261 — £541 | 4 variants | Price my 2020 |
| 2019 | £261 — £541 | 4 variants | Price my 2019 |
| 2018 | £261 — £541 | 5 variants | Price my 2018 |
| 2017 | £261 — £541 | 5 variants | Price my 2017 |
| 2016 | £261 — £541 | 5 variants | Price my 2016 |
| 2015 | £261 — £541 | 5 variants | Price my 2015 |
| 2014 | £261 — £541 | 5 variants | Price my 2014 |
| 2013 | £261 — £541 | 5 variants | Price my 2013 |
| 2012 | £261 — £541 | 5 variants | Price my 2012 |
| 2011 | £261 — £541 | 5 variants | Price my 2011 |
| 2010 | £261 — £541 | 5 variants | Price my 2010 |
| 2009 | £261 — £541 | 5 variants | Price my 2009 |
| 2008 | £258 — £541 | 9 variants | Price my 2008 |
| 2007 | £258 — £289 | 4 variants | Price my 2007 |
| 2006 | £258 — £289 | 4 variants | Price my 2006 |
| 2005 | £258 — £289 | 4 variants | Price my 2005 |
| 2004 | £258 — £289 | 4 variants | Price my 2004 |
| 2003 | £258 — £289 | 4 variants | Price my 2003 |
| 2002 | £258 — £289 | 4 variants | Price my 2002 |
| 2001 | £258 — £289 | 4 variants | Price my 2001 |
| 2000 | £258 — £289 | 4 variants | Price my 2000 |
| 1999 | £258 — £289 | 4 variants | Price my 1999 |
| 1998 | £258 — £289 | 4 variants | Price my 1998 |
| 1997 | £258 — £289 | 4 variants | Price my 1997 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Berlingos can still be booked.
Showing 4 reviews from verified Citroen Berlingo owners. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking a rear-window replacement with us follows a simple five-step process.
Complete a quick online quote through our guided widget — takes around a minute and covers your Berlingo's exact specification.
Our parts-check team verifies the correct glass variant and any special fitment hardware needed.
We match you with an approved local fitter experienced in Berlingo replacements.
On the fitting day, your fitter removes the shattered original window and bonds in the replacement — typically 30–60 minutes of active work. A shattered rear window means shard cleanup is a major part of the job; your fitter removes what's accessibly reachable, but small shards can lodge in places that need deeper access.
Your fitter confirms the drive-away time before leaving. We recommend booking a professional interior valet afterwards for thorough glass-shard detailing.
All replacements include a two-year warranty on workmanship and glass quality, with support from UKCG if issues arise.
The Berlingo's rear-window replacement is typically completed mobile at your address — it's straightforward glass-and-adhesive work without the structural complexity of windscreen fitting.
However, if your Berlingo is equipped with ADAS (Highway Driver Assist or Safety Pack Plus from around 2020 onwards), any windscreen replacement on that vehicle would require workshop calibration. For rear-window jobs specifically, ADAS doesn't apply, so mobile fitting remains the norm.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Left side window — choose this if your car has a left-side door window that needs replacing.
The left side window is the glass panel in the door on the driver's side of the vehicle (or front passenger side in right-hand-drive markets where the driver sits on the right). This is an operable window — it rolls up and down using the window mechanism in the door. Unlike the windscreen or rear window, side windows are typically toughened glass, which means they shatter into small fragments if broken rather than cracking into large shards. Replacing a left side window is a straightforward job that doesn't involve adhesive bonding.
Look at the driver's side of your car — the left side window is the glass panel in the front-left door that you can wind down. If this glass is cracked, chipped, or missing, you need a left side window replacement. You can also check your vehicle's documentation or ask your dealer's service centre to confirm which positions are affected if you're unsure.
Left side window replacement is typically faster than windscreen work because there is no adhesive bonding and no calibration involved. The glass is held in place by clips, seals, and the door mechanism. However, if the window has shattered, glass fragments may lodge in hard-to-reach areas inside the door or trim. We recommend a professional interior valet afterwards to ensure all shards are thoroughly removed from seat mechanisms, seatbelts, and door channels.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
Your vehicle has two rear doors, so a four-door configuration.
This attribute identifies whether your vehicle is a four-door or two-door model. Four-door cars have a rear door on both the driver and passenger sides; two-door cars have only front doors. This classification affects which glass panels are present in your vehicle — four-door models include rear side windows and rear doors, whilst two-door models do not. Knowing your door configuration helps us identify the correct glass type and position for your windscreen or window replacement.
Count the doors on your vehicle. If you can open a door behind the front passenger and driver seats on both sides, you have a four-door (right) configuration. If only the front doors open, you have a two-door model. You can also check your vehicle's documentation or ask your dealer or service centre — they'll confirm the exact door count in seconds.
Four-door models have rear side windows and rear doors that may require replacement. This affects the range of glass panels we can supply and fit for you. All standard glass types in four-door cars — windscreen, rear window, front and rear side windows — are within our service scope and follow the same replacement and fitting process as two-door variants. The door configuration itself does not alter calibration or cure-time procedures.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
An opening pane with hinged hardware, typically on rear quarters or van sides.
An opening glass pane is a hinged or pivoting section of bodyglass designed to swing or tilt outward for ventilation or access. Commonly found on rear quarters of estates or vans, and on van side panels. Unlike fixed side windows or windscreens, opening panes are part of the vehicle's passive ventilation system and allow airflow without opening a door or window. The hinge and frame hardware are integral to the feature's function.
Check your vehicle's side and rear quarter panels for hinged glass sections that swing outward. Ask your dealer or service centre whether your model includes rear quarter vents or van-side opening panels. Your handbook will list ventilation features. Opening panes are visually distinct from sliding or rolling windows — they pivot on visible hinges rather than moving vertically or horizontally.
UKCG handles opening-pane replacement on a bespoke basis — please contact us for a quote rather than using the automated quote tool. Replacement includes the glass pane and matching hinge hardware where supplied. Fitting time is typically brief as there is no adhesive cure or calibration required. The pane is held in place by mechanical hinges and seals, so you can use the vehicle immediately after fitting.
A rear window without heating elements — selected when the model's standard specification includes a heated rear glass option.
An unheated rear window is a variant specification where the rear glass does not include integrated electric heating wires. Many vehicle models offer heated rear glass as standard or as an option to demist the window quickly in cold or wet conditions. An unheated rear window omits this feature entirely. It is a cost-conscious choice and remains fully functional for visibility and weather protection — demisting simply takes longer and relies on the vehicle's cabin heating system alone.
Check your vehicle's specification sheet or service documentation. If your model range lists 'heated rear window' or 'rear demister' as a standard or optional feature and your car does not have it, you have an unheated variant. You can also look at the rear window itself — a heated rear window shows a faint pattern of horizontal heating wires when you look closely at the glass. An unheated window appears completely clear with no wire pattern visible.
Replacement glass must match your original specification. If your vehicle has an unheated rear window, the replacement must also be unheated — you cannot fit a heated variant without additional wiring and control-module work, which falls outside standard glass replacement scope. Conversely, if heated glass is standard for your model and you wish to stay unheated, confirm this choice at booking. No calibration is involved with rear-window replacement.
The Citroën Berlingo has been in continuous production since 1997, spanning multiple generations as a practical multi-purpose vehicle. Early models carried straightforward toughened rear windows, while later variants from the mid-2010s onwards began incorporating solar-control glass on certain trims to reduce cabin heat.
From approximately 2020, ADAS systems with front-facing cameras became standard on higher-trim Berlingo variants, introducing camera brackets behind the windscreen. This means newer ADAS-equipped models require static camera calibration after windscreen replacement, which is completed by specialists on our network as part of the fitting process.
Own a different Citroen? We've got you — every variant, every year.
The questions customers ask us most often.