Rear window replacement for the Citroën Relay — matched to your variant and fitted by approved specialists in your area, booked online in under two minutes.
Make
Citroen
Model
Relay
No card required · Free to quote
Pricing varies primarily with the presence of rear-window heating and the specific variant generation. Heated models carry a higher cost than unheated equivalents. Green-tinted variants are priced separately from clear-glass options.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2006 | £261 — £288 | 8 variants | Price my 2006 |
| 2005 | £261 — £288 | 8 variants | Price my 2005 |
| 2004 | £261 — £288 | 8 variants | Price my 2004 |
| 2003 | £261 — £288 | 8 variants | Price my 2003 |
| 2002 | £261 — £288 | 8 variants | Price my 2002 |
| 2001 | £261 — £288 | 8 variants | Price my 2001 |
| 2000 | £261 — £288 | 8 variants | Price my 2000 |
| 1999 | £261 — £288 | 8 variants | Price my 1999 |
| 1998 | £261 — £288 | 8 variants | Price my 1998 |
| 1997 | £261 — £288 | 8 variants | Price my 1997 |
| 1996 | £261 — £288 | 8 variants | Price my 1996 |
| 1995 | £261 — £288 | 8 variants | Price my 1995 |
| 1994 | £264 — £274 | 5 variants | Price my 1994 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Relays can still be booked.
Showing 1 review from verified Citroen Relay owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking a rear-window replacement for your Relay takes just a couple of minutes online.
Use our quick quote tool to identify your Relay's exact variant — you'll answer a short set of questions about the model year and rear-window features.
You'll receive an instant price and can book immediately for a date that suits you.
Our parts-check team confirms the correct glass is sourced to match your specification.
A technician from our network visits your chosen location (mobile at your address or a workshop) and replaces the glass in around 30–60 minutes of active work.
Your technician will clear accessible broken glass as part of the fit, but we recommend a professional valet afterwards to deep-clean the interior — shards can lodge in places that are harder to reach on the day.
You'll receive a two-year warranty on the replacement and guidance on drive-away time before the technician leaves.
The whole process, from quote to booking to completion, is designed to get you back on the road with minimum disruption.
Most Relay rear-window replacements are fitted mobile at your preferred address — your driveway, workplace, or roadside. Because commercial Relays do not typically carry advanced driver-assistance cameras on the rear window, there is no calibration requirement that would necessitate a workshop visit.
If you prefer a workshop environment for any reason, mobile or workshop can be arranged at booking — the choice is yours. The Relay's straightforward rear-window specification means the job can be completed efficiently in either setting.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A rear window without heating elements — selected when the model's standard specification includes a heated rear glass option.
An unheated rear window is a variant specification where the rear glass does not include integrated electric heating wires. Many vehicle models offer heated rear glass as standard or as an option to demist the window quickly in cold or wet conditions. An unheated rear window omits this feature entirely. It is a cost-conscious choice and remains fully functional for visibility and weather protection — demisting simply takes longer and relies on the vehicle's cabin heating system alone.
Check your vehicle's specification sheet or service documentation. If your model range lists 'heated rear window' or 'rear demister' as a standard or optional feature and your car does not have it, you have an unheated variant. You can also look at the rear window itself — a heated rear window shows a faint pattern of horizontal heating wires when you look closely at the glass. An unheated window appears completely clear with no wire pattern visible.
Replacement glass must match your original specification. If your vehicle has an unheated rear window, the replacement must also be unheated — you cannot fit a heated variant without additional wiring and control-module work, which falls outside standard glass replacement scope. Conversely, if heated glass is standard for your model and you wish to stay unheated, confirm this choice at booking. No calibration is involved with rear-window replacement.
The Citroën Relay is a light commercial vehicle that has been in continuous production since 1994, serving owner-operators and fleet operators across the UK. Rear windows on the Relay are typically toughened glass, designed to withstand the demands of van life and cargo work.
Most Relay variants carry a rear window in standard clear or green-tinted glass, with some models featuring heated elements for demisting. Heated rear windows integrate light-duty heating wires that help remove condensation and light frost — though they are designed for light-duty clearing, not heavy-duty heating.
Because the Relay is a commercial vehicle without advanced driver-assistance systems on standard variants, rear-window replacement is straightforward bonded-glass work with no calibration required. Fitting is typically completed within a couple of hours.
Own a different Citroen? We've got you — every variant, every year.
The questions customers ask us most often.
