Rear window replacement for your Citroën C4 — instant quote across 9 variants in under 60 seconds, fitted by approved fitters in your area.
Make
Citroen
Model
C4
No card required · Free to quote
Replacement costs vary across C4 generations and trim levels, primarily driven by the heated rear element, any integrated antenna function, and whether your variant includes brake-light integration or encapsulation (a pre-fitted rubber gasket moulded to the glass edge).
Older models without these extras tend to be more straightforward; later variants with multiple integrated features carry higher replacement costs due to the complexity of sourcing matched glass.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £262 — £637 | 5 variants | Price my 2026 |
| 2025 | £262 — £637 | 5 variants | Price my 2025 |
| 2024 | £262 — £637 | 5 variants | Price my 2024 |
| 2023 | £262 — £637 | 5 variants | Price my 2023 |
| 2022 | £262 — £637 | 5 variants | Price my 2022 |
| 2021 | £262 — £637 | 5 variants | Price my 2021 |
| 2020 | £262 — £637 | 5 variants | Price my 2020 |
| 2019 | £262 — £637 | 4 variants | Price my 2019 |
| 2018 | £262 — £637 | 4 variants | Price my 2018 |
| 2017 | £262 — £637 | 4 variants | Price my 2017 |
| 2016 | £262 — £637 | 4 variants | Price my 2016 |
| 2015 | £262 — £637 | 4 variants | Price my 2015 |
| 2014 | £262 — £637 | 4 variants | Price my 2014 |
| 2013 | £262 — £637 | 4 variants | Price my 2013 |
| 2012 | £262 — £637 | 4 variants | Price my 2012 |
| 2011 | £262 — £637 | 4 variants | Price my 2011 |
| 2010 | £262 — £449 | 7 variants | Price my 2010 |
| 2009 | £262 — £327 | 6 variants | Price my 2009 |
| 2008 | £262 — £327 | 6 variants | Price my 2008 |
| 2007 | £262 — £327 | 6 variants | Price my 2007 |
| 2006 | £262 — £327 | 6 variants | Price my 2006 |
| 2005 | £262 — £327 | 6 variants | Price my 2005 |
| 2004 | £262 — £327 | 6 variants | Price my 2004 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older C4s can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your rear-window replacement through UK Car Glass is a simple four-step process.
Complete a quick online quote using our guided variant quiz — takes about a minute and identifies exactly which rear window your C4 needs.
Confirm your booking and checkout — the whole process is done in under two minutes from start to finish.
You'll be matched with an approved fitter in your area who sources your replacement glass and schedules a fitting time that suits you.
On fitting day, your fitter typically needs 30–60 minutes to remove the shattered glass, clean out accessible shards, and fit your new rear window.
Once fitted, your fitter will confirm the drive-away time (usually same day) and cover your new window with a two-year warranty on workmanship and glass quality.
Your C4 is back on the road with a replacement rear window that matches your factory specification.
Most C4 rear-window replacements are carried out as a mobile visit to your home or workplace — your fitter brings the glass and tools to you. The rear window itself does not carry ADAS camera systems, so calibration is not a factor.
Your approved fitter will decide whether mobile or workshop is best based on your location, weather, and vehicle access — but the standard approach is mobile convenience.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Dark green tinted rear and side glass that's noticeably darker than the front windscreen but still see-through in daylight.
Dark green tint is a factory-applied colour to the rear window and side windows on some vehicles. It serves both aesthetic and functional purposes: it reduces glare and heat from sunlight, provides a degree of privacy without completely obscuring the interior, and contributes to the vehicle's overall design. Unlike privacy glass (which is much darker and difficult to see through from outside), dark green tint maintains reasonable transparency while still offering a tinted appearance.
Look at your rear window and rear side windows in daylight. If they appear noticeably darker and greenish in tone compared to your front windscreen, you have dark green tint. The tint will be clearly visible when you look at the vehicle from outside, but you'll still be able to see through to the interior in normal daylight. Check your vehicle documentation or ask your dealership if you're uncertain.
Replacement glass must match the original dark green tint specification to maintain the vehicle's appearance and light-control properties. We source OEM or OE-equivalent tinted glass to the correct colour specification. Tinted glass is available from stock for most common vehicles, though lead times may occasionally be slightly longer than untinted variants. Installation and cure procedures are identical to standard glass; tint does not affect fitting time or drive-away windows.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
The Citroën C4 has evolved through multiple generations since 2004, with rear-window specifications varying by year and trim.
Most C4 models feature a heated rear demist element — a practical feature for UK winters that also doubles as an AM/FM antenna on some variants. The glass itself is typically toughened, which means it shatters into small pieces on impact rather than splintering dangerously.
From the late 2010s onwards, some C4 variants began carrying forward-facing camera systems for driver assistance features like adaptive cruise and lane-keeping support, which affects windscreen specification but does not directly impact rear-window replacement.
Own a different Citroen? We've got you — every variant, every year.
The questions customers ask us most often.
