A
Allan
Verified on Trustpilot3 Aug 2022
Would recommend !
Arrived when they said, replaced perfect and quickly. Also hoovered all the old glass.
Audi A6 rear window replacement — booked online.
Instant quote across 22 Audi A6 rear-window variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £474 to £1,195
4.82 / 5 ·
1,456 Trustpilot reviews
Get your quote
Under 60 secondsMake
Audi
Model
A6
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, factory-spec match
- 2-year workmanship warranty
Audi A6 rear window price, by year
Replacement cost varies with generation, antenna presence, and heating integration. Earlier A6 models without integrated antennas or heating tend to be more affordable. Later variants—especially Avant estates with heated rear glass and radio-antenna elements—carry higher complexity and calibration costs, particularly when antenna choke integrity must be verified after fitting.
Encapsulated trim (pre-bonded gasket) also affects pricing, as does the presence of brake-light circuits or other factory-fitted hardware that must be preserved during replacement.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £573 — £673 | 6 variants | Price my 2026 |
| 2025 | £573 — £673 | 6 variants | Price my 2025 |
| 2024 | £573 — £673 | 6 variants | Price my 2024 |
| 2023 | £573 — £673 | 6 variants | Price my 2023 |
| 2022 | £573 — £673 | 6 variants | Price my 2022 |
| 2021 | £573 — £673 | 6 variants | Price my 2021 |
| 2020 | £573 — £673 | 6 variants | Price my 2020 |
| 2019 | £573 — £673 | 6 variants | Price my 2019 |
| 2018 | £514 — £673 | 8 variants | Price my 2018 |
| 2017 | £514 — £613 | 3 variants | Price my 2017 |
| 2016 | £514 — £613 | 3 variants | Price my 2016 |
| 2015 | £514 — £613 | 3 variants | Price my 2015 |
| 2014 | £514 — £1,195 | 4 variants | Price my 2014 |
| 2013 | £514 — £1,195 | 4 variants | Price my 2013 |
| 2012 | £514 — £1,195 | 4 variants | Price my 2012 |
| 2011 | £474 — £1,195 | 8 variants | Price my 2011 |
| 2010 | £474 — £950 | 4 variants | Price my 2010 |
| 2009 | £474 — £950 | 4 variants | Price my 2009 |
| 2008 | £474 — £950 | 4 variants | Price my 2008 |
| 2007 | £474 — £950 | 3 variants | Price my 2007 |
| 2006 | £474 — £950 | 5 variants | Price my 2006 |
| 2005 | £474 — £950 | 5 variants | Price my 2005 |
| 2004 | £515 — £771 | 5 variants | Price my 2004 |
| 2003 | £515 — £771 | 4 variants | Price my 2003 |
| 2002 | £515 — £771 | 4 variants | Price my 2002 |
| 2001 | £515 — £771 | 4 variants | Price my 2001 |
| 2000 | £515 — £771 | 4 variants | Price my 2000 |
| 1999 | £515 — £771 | 4 variants | Price my 1999 |
| 1998 | £496 — £771 | 5 variants | Price my 1998 |
| 1997 | £496 — £548 | 3 variants | Price my 1997 |
| 1996 | £342 — £496 | 3 variants | Price my 1996 |
| 1995 | £342 — £496 | 2 variants | Price my 1995 |
| 1994 | £342 — £496 | 2 variants | Price my 1994 |
| 1993 | £342 — £501 | 3 variants | Price my 1993 |
| 1992 | £342 — £501 | 3 variants | Price my 1992 |
| 1991 | £342 — £342 | 1 variant | Price my 1991 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older A6s can still be booked.
What Audi A6 owners say
Showing 3 reviews from verified Audi A6 owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
What to expect during your Audi A6 rear window replacement
Rear-window replacement follows a straightforward process from online quote through fitting and aftercare.
- 1
Complete a guided quiz on the UKCG website to identify your exact A6 variant—generation, trim, and features—in under 60 seconds.
- 2
Receive an instant quote tailored to your rear-window specification, including any heating elements or antenna integration.
- 3
Book online in under two minutes; UKCG matches you with a specialist technician in your area.
- 4
On fitting day, your technician removes the shattered glass and clears accessible shards, then bonds your replacement rear window—typically 30–60 minutes of their time.
- 5
Your fitter confirms the drive-away time before leaving (adhesive cure runs in the background).
- 6
After the job, we recommend a professional valet to remove any fine glass shards that may lodge in seats, trim, or boot linings.
Your replacement is covered by a two-year warranty on both workmanship and glass quality, with support from UKCG if any issues arise.
Mobile fitting or workshop visit for your A6?
Most rear-window replacements for the A6 can be completed at your home or preferred location via mobile fitting. However, if your A6 carries integrated brake-light circuits or other electrical hardware bonded to the glass, the technician may recommend a workshop visit to safely verify circuit continuity after fitting.
Your fitter will advise on the best approach during the pre-fitting parts check and confirm the location before you book—ensuring the job is completed correctly without splitting the work across multiple visits.
We confirm the specific answer for your vehicle when you book.
What features does your A6 have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated Rear Windscreen21
1991–2026Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
What it means
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
How to tell
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement impact
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Antenna17
1991–2026An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
What it means
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
How to tell
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
Replacement impact
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Green15
1991–2026Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar Control8
2004–2026Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Brake Light7
1996–2026A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
What it means
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
How to tell
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
Replacement impact
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Grey Privacy5
1998–2026Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
What it means
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
How to tell
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Replacement impact
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
GPS2
1997–2011GPS antenna built into the windscreen connects your sat-nav to satellite signals for reliable navigation.
What it means
A GPS antenna is laminated into the windscreen glass during manufacture, providing a direct aerial connection for your vehicle's satellite-navigation system. This integrated design offers better signal reception than external antennas and a cleaner aesthetic. The antenna print and electrical connector are engineered into the glass itself, allowing the navigation receiver to lock onto GPS satellites without interference from the vehicle's metal body or other components.
How to tell
Check your vehicle's handbook or ask your dealership service centre whether your windscreen carries an integrated GPS antenna. You won't see obvious external aerials or connectors on the glass itself — the antenna is laminated internally. If your sat-nav works reliably without a visible roof-mounted antenna, it's likely GPS-equipped.
Replacement impact
Replacement windscreens with GPS antennas must be sourced as OEM (original-equipment) glass to preserve navigation functionality. The antenna print pattern and electrical connector are specific to your vehicle's sat-nav system. Aftermarket glass without the antenna print will not support GPS reception. We confirm OEM availability when you book; lead times may be slightly longer than standard glass.
Laminated2
2011–2026Laminated windscreens hold together when they crack, staying bonded to an inner layer rather than shattering into dangerous shards.
What it means
Laminated glass consists of two glass panes bonded to a tough plastic interlayer, usually polyvinyl butyral (PVB). When struck, the glass cracks but the interlayer holds the pieces in place, preventing the sharp shards that would scatter from tempered glass. This design prioritises occupant safety — the windscreen remains structurally sound even after impact, reducing the risk of ejection and keeping wind and weather out of the cabin. Laminated glass also provides sound dampening and blocks most ultraviolet light. All modern windscreens are laminated as standard.
How to tell
Look at your windscreen edge-on — you'll see a thin darker line (the interlayer) sandwiched between the two glass panes. Tap the glass gently with your knuckle: laminated glass produces a duller, more solid sound compared to the sharper ring of tempered side or rear windows. Your service manual or dealer can confirm, but all production windscreens are laminated.
Replacement impact
Laminated glass is bonded to the frame with structural adhesive, so cure time applies after replacement. Your windscreen is safety-critical — it contributes up to 30% of vehicle structural integrity and supports airbag deployment. The adhesive bond must fully cure before the vehicle is driven normally; your fitter will confirm the specific drive-away time before releasing the car. This is true whether or not your windscreen has camera or sensor features.
Bronze Privacy1
2005–2011Dark Bronze is a factory tint applied to rear windows and doors for privacy and heat reduction.
What it means
Dark Bronze, officially known as Privacy Glass, is a tinted glass feature created during manufacturing through a deep-dipping process. The inside surface of the glass is dyed with dark pigment, giving the rear half of the vehicle a darker appearance than the front. This serves two purposes: it reduces glare and heat entering the rear cabin, and it provides occupants with greater privacy by limiting visibility into the rear passenger area from outside. It's a permanent feature of the glass itself, not a removable film or coating.
How to tell
Look at your rear door windows and rear window — if they're noticeably darker than your front windscreen and front door windows, you have Dark Bronze tint. You can also check your vehicle's specification sheet or contact your dealer to confirm whether Privacy Glass was fitted as standard on your model.
Replacement impact
Dark Bronze replacement glass must match the original tint level to maintain the vehicle's appearance and privacy. OE (original equipment) glass with the correct tint is essential — aftermarket untinted glass will look visibly lighter and won't provide the same heat or privacy performance. When we source your replacement, we confirm the exact tint specification for your vehicle to ensure a perfect match.
Mobile Telephone1
2004–2011Built-in telephone aerial in the rear window for older luxury vehicles with handset systems.
What it means
A mobile telephone system fitted to certain older luxury vehicles consists of an aerial and connector circuit printed or bonded into the rear window glass, paired with a handset mounted inside the cabin (typically between the front seats). The aerial enables radio transmission and reception for the in-car telephone. When the rear window is replaced, the new glass must carry an identical aerial print so the handset's electrical connector mates correctly and the system functions.
How to tell
Check whether your vehicle has a handset unit mounted between the front seats or on the centre console. If present, your rear window will have a fine printed pattern or metallic trace visible on the glass itself (usually near the top edge). Ask your dealer or service centre to confirm whether your model is fitted with a factory mobile telephone system; they can verify this from the vehicle specification.
Replacement impact
The replacement rear window must be an exact OE match with the identical aerial circuit printed into the glass. Aftermarket glass typically does not carry this feature. You will need to source the glass from the vehicle manufacturer or a specialist supplier holding OE stock. Fitting is standard; the handset reconnects once the glass is installed. Cure time applies as with any bonded rear window.
TV Antenna1
2004–2011A TV-reception aerial printed into the rear window, typically for in-car entertainment systems.
What it means
A TV antenna is an aerial pattern laminated into the rear windscreen or rear side window to receive broadcast television signals. It's a separate system from the vehicle's radio or mobile antenna and is typically found in vehicles equipped with rear-seat entertainment systems. The antenna is printed directly onto or into the glass during manufacture, so when the glass is replaced, the antenna pattern must be reproduced on the replacement to maintain reception quality.
How to tell
Check your vehicle's specification sheet or handbook for rear-seat entertainment or TV tuner capability. If your car has a rear-seat entertainment system with a TV tuner, the rear window will have a TV antenna. You can also ask your dealer or service centre to confirm whether your vehicle has this feature.
Replacement impact
When the rear window is replaced, the replacement glass must include the matching TV antenna print to preserve reception. OEM (original equipment manufacturer) glass is typically required to ensure the antenna pattern is identical. The antenna is passive and requires no calibration or specialist procedures after fitting. Cure time for bonded rear glass is required; the fitter will confirm the drive-away time on the day.
About the Audi A6
The Audi A6 has been in continuous production since 1994, evolving through five generations. Rear-window specifications vary significantly across these eras, with earlier models carrying straightforward toughened glass and later variants introducing antenna integration, heating elements (particularly on Avant estate models), and encapsulated trim.
From the mid-2010s onwards, many A6 models feature integrated antennas for radio reception, and Avant variants commonly include heated rear glass with dual-function heating and antenna elements. Modern A6s may also carry additional hardware for climate control or integrated brake-light circuits, which must be matched precisely during replacement.
Because rear windows are toughened rather than laminated, they shatter into small pieces on impact—making shard cleanup a significant part of the job. Your fitter will remove accessible shards, but a professional interior valet afterwards is recommended for thorough detailing.
Other Audi models
Own a different Audi? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.