UK Car Glass
Menu

Volkswagen Up windscreen replacement — booked online.

Instant quote across 8 Volkswagen Up variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.

Prices from £346 to £757
4.82 / 5 · 1,456 Trustpilot reviews

Get your quote

Under 60 seconds

Make

Volkswagen

Model

Up

No card required · Free to quote

  • Instant online prices
  • Vetted specialist network
  • OEE glass, ADAS-certified
  • 2-year workmanship warranty

Volkswagen Up windscreen price, by year

Prices vary primarily with generation and ADAS equipment presence. Earlier Up models without cameras and sensors represent the most straightforward replacements, whilst later variants equipped with front cameras and rain sensors require post-fitting calibration, which adds complexity and cost.

Solar-control and acoustic glass options, which appear across most modern variants, also influence pricing. The encapsulation feature — a factory-bonded rubber gasket — appears on most current-generation models and affects sourcing and fitting procedures.

Year Price range Quote
2026 £634 £634 Price my 2026
2025 £634 £634 Price my 2025
2024 £346 £634 Price my 2024
2023 £346 £634 Price my 2023
2022 £346 £634 Price my 2022
2021 £346 £757 Price my 2021
2020 £346 £757 Price my 2020

The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Ups can still be booked.

Curious why prices vary so widely? Read our UK windscreen replacement cost guide .

What Volkswagen Up owners say

Showing 1 review from verified Volkswagen Up owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.

JW

josette W.

Verified on Trustpilot3 Apr 2024

Up owner

Quick and efficient service

Quick service. arrived on time. Polite and efficient engineer. left a clear and clean space after finishing the work. Would highly recommend

VT

Vernon T.

Verified on Trustpilot7 May 2026

Two chaps turned up to replace…

Two chaps turned up to replace windscreen. Very curtius and informative. Did a great job .no damage to the car which I've had with other company's in the past..great information from the start buy there team.highly recommend uk car glass

WG

William G.

Verified on Trustpilot4 May 2026

The guy i dealt with was great he had…

The guy i dealt with was great he had my quote straight away and had my windscreen fixed within 2days quick and reliable and kept me up to date with everything that was going on. I couldn't ask for any better.

PM

Philip M.

Verified on Trustpilot2 May 2026

Efficient replacement of B-Max Rear Window

Some difficulty locating replacement rear offside window for my Ford B-Max at the right price. After slight delay efficient service by office administrators and installer.

MA

Max A.

Verified on Trustpilot1 May 2026

Great communication

Great communication, easy and speedy service and affordable pricing would 100% recommend!

MA

Max A.

Verified on Trustpilot1 May 2026

Great communication

Great communication, easy and speedy service and affordable pricing would 100% recommend!

PL

Peter L.

Verified on Trustpilot26 Apr 2026

Excellent

Arrived on time, took a little bit longer to replace the rear window on a corsa hatchback but the work was excellent and all the broken glass was retrieved and disposed of. The guy from UK glass was very thorough and I would recommend this company should you need any car windows/windscreens replacing.

SH

Shane H.

Verified on Trustpilot22 Apr 2026

Fantastic booking experience thanks to…

Fantastic booking experience thanks to Jackie. £240 less than a qoute from a well know company who said could not do it at my house despite accepting a booking. Technician called 10 minutes before arrival and did a great job. Highly recommend.

CH

Colin H.

Verified on Trustpilot17 Apr 2026

Good communication

Good communication, arrived well within the dedicated time and carried out a thoroughly professional job in a friendly manner.

PK

Peter K.

Trustpilot7 Apr 2026

They replaced my windscreen quickly and…

They replaced my windscreen quickly and cleanly. The external seal was also broken and they replaced that too. I was very happy with their service and the technician sent to do the work. Thanks

GL

Gary L.

Trustpilot24 Mar 2026

A quick, first class experience at a good price!

UK Car Glass did a superb job replacing my shattered heated rear screen. From my initial enquiry they swiftly followed up by email to exactly ensure my requirements, and the work was carried out efficiently the following day, including cleaning up all the shattered glass. Excellent value!

LC

Linda C.

Verified on Trustpilot17 Mar 2026

Fiat 500 Front screen.

Very good and easy to use Website, once booked a very polite person called to adjust the date, a couple of days later Credit cards was debited, the gentleman Fitter arrived on the 17th March 2026. He was extremely polite, with 20 years experience, he did a very clean job. I’m extremely happy. great company.

DR

david R.

Verified on Trustpilot30 Jan 2026

pleasing outcome.

although the technician arrived late in the day he did not rush anything carrying on very calmly and carefully. the finished job looking like new. he tidied everything up . so a really competent fixing and friendly with it.

What to expect during your Volkswagen Up windscreen replacement

Booking your Up windscreen replacement through UKCG is a straightforward four-stage process.

  1. 1

    Answer a quick quiz about your Up's year, trim, and features — the widget identifies your exact variant in under 60 seconds.

  2. 2

    Review the instant quote and choose your preferred date and time.

  3. 3

    Our team matches you with a local specialist and conducts a parts check to confirm your glass specification.

  4. 4

    Your fitter arrives at your address (or workshop, if you prefer) and completes the replacement — typically 45–90 minutes of hands-on work for windscreen jobs.

  5. 5

    If your Up has a front camera and ADAS features, calibration is completed on the same visit.

  6. 6

    Your fitter confirms the minimum drive-away time before you leave, and your two-year warranty begins.

Every job is backed by a two-year warranty on workmanship and glass quality.

Mobile fitting or workshop visit for your Up?

Most Up windscreen replacements are fitted mobile at your address — that's the default option. However, if your Up is equipped with a front camera and ADAS features, your specialist may recommend a workshop visit so calibration can be completed in a controlled environment with proper target boards.

UCKG never splits the job across locations; if calibration is needed, the full replacement and calibration happen in one place on one visit. Weather can also influence the choice — your specialist will advise at booking.

We confirm the specific answer for your vehicle when you book.

What features does your Up have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

  • Green8
    2011–2026

    Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.

    What it means

    Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.

    How to tell

    The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.

    Replacement impact

    Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.

  • Solar Control8
    2011–2026

    Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.

    What it means

    Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.

    How to tell

    Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.

    Replacement impact

    Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.

  • Vin Notch8
    2011–2026

    A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.

    What it means

    A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.

    How to tell

    Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.

    Replacement impact

    When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.

  • Encapsulation6
    2011–2026

    Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.

    What it means

    Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.

    How to tell

    Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.

    Replacement impact

    Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.

  • Camera5
    2011–2026Calibration varies by vehicle

    A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.

    What it means

    A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.

    How to tell

    Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.

    Replacement impact

    Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.

    Calibration mix across our Volkswagen variants

    • 1None

    We confirm the exact procedure for your specific vehicle when you book.

  • Rain Sensor4
    2013–2026No calibration after replacement

    Your wipers automatically activate when rain falls on the windscreen.

    What it means

    A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.

    How to tell

    Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.

    Replacement impact

    Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.

  • Bracket For Safety Features3
    2011–2026Calibration varies by vehicle

    The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.

    What it means

    A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.

    How to tell

    Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.

    Replacement impact

    On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.

    Calibration mix across our Volkswagen variants

    • 1None

    We confirm the exact procedure for your specific vehicle when you book.

  • Fitting Hardware2
    2011–2024

    Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.

    What it means

    Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.

    How to tell

    Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.

    Replacement impact

    Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.

  • Heated Windscreen2
    2013–2026

    Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.

    What it means

    A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.

    How to tell

    Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.

    Replacement impact

    Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.

  • LIDAR1
    2011–2023Bespoke calibration

    LIDAR helps your car sense its surroundings for advanced safety and driver-assistance features.

    What it means

    LIDAR (Light Detection and Ranging) is a sensor technology that uses laser beams to detect objects, obstacles, and road features in three dimensions. It creates a detailed map of the vehicle's surroundings in real time, enabling advanced driver-assistance systems (ADAS) such as adaptive cruise control, collision avoidance, and autonomous emergency braking. LIDAR complements camera and radar systems by providing precise distance and depth information, even in poor visibility or low-light conditions. It is increasingly fitted to modern vehicles as part of their safety and autonomous-capability infrastructure.

    How to tell

    Check your vehicle's handbook or contact your dealership to confirm LIDAR fitment. LIDAR sensors are typically mounted on the roof, bumpers, or within the windscreen/rear-window frame area. You may see reference to 'LIDAR', 'laser radar', or specific safety-feature names (e.g. 'adaptive cruise control', 'autonomous emergency braking') that rely on LIDAR in your documentation.

    Replacement impact

    If your windscreen or rear window houses or frames a LIDAR sensor, replacement requires careful handling to preserve or recalibrate the sensor post-fit. LIDAR calibration procedures vary significantly by vehicle make, model, and year—some require static alignment using specialist target equipment, others demand dynamic road-drive procedures, and some use a combination. We identify the exact calibration requirement when we look up your specific vehicle and confirm it with you before booking.

About the Volkswagen Up

The Volkswagen Up has been in continuous production since 2011, evolving through subtle generational updates rather than major platform overhauls. Early models carry straightforward laminated windscreens with minimal sensor integration, whilst later variants from the mid-2010s onwards feature solar-control glass and acoustic interlayers as standard.

From around 2018, some Up models began incorporating front-facing camera systems for driver-assistance features. This introduced camera brackets behind the windscreen and calibration requirements after replacement. Most Up windscreens today carry green-tinted and solar-control coatings to reduce cabin heat and glare.

Frequently asked questions

The questions customers ask us most often.