Instant quote for your Toyota Aygo windscreen across six active variants, fitted by approved fitters near you — booked online in under two minutes.
Make
Toyota
Model
Aygo
No card required · Free to quote
Replacement costs vary depending on whether your Aygo requires camera calibration after fitting. Variants with Toyota Safety Sense camera systems involve static calibration at a workshop, extending the technician time and requiring a controlled environment with target boards. Earlier models without cameras are typically the most straightforward and affordable to replace.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2022 | £303 — £755 | 4 variants | Price my 2022 |
| 2021 | £303 — £755 | 4 variants | Price my 2021 |
| 2020 | £303 — £755 | 4 variants | Price my 2020 |
| 2019 | £303 — £755 | 4 variants | Price my 2019 |
| 2018 | £303 — £755 | 4 variants | Price my 2018 |
| 2017 | £303 — £755 | 4 variants | Price my 2017 |
| 2016 | £303 — £545 | 3 variants | Price my 2016 |
| 2015 | £303 — £545 | 3 variants | Price my 2015 |
| 2014 | £277 — £545 | 5 variants | Price my 2014 |
| 2013 | £277 — £297 | 2 variants | Price my 2013 |
| 2012 | £277 — £297 | 2 variants | Price my 2012 |
| 2011 | £277 — £297 | 2 variants | Price my 2011 |
| 2010 | £277 — £297 | 2 variants | Price my 2010 |
| 2009 | £277 — £297 | 2 variants | Price my 2009 |
| 2008 | £277 — £297 | 2 variants | Price my 2008 |
| 2007 | £277 — £297 | 2 variants | Price my 2007 |
| 2006 | £277 — £297 | 2 variants | Price my 2006 |
| 2005 | £277 — £297 | 2 variants | Price my 2005 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Aygos can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Showing 6 reviews from verified Toyota Aygo owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Aygo windscreen replacement takes just a couple of minutes online, and fitting is usually arranged within days.
Answer a quick quiz about your model year and trim to identify your exact glass variant.
Receive an instant quote tailored to your Aygo's features — camera systems and calibration needs are flagged if present.
Book online and select a convenient time; we match you with a local specialist in your area.
On the day, your fitter removes the old windscreen, fits the replacement glass, and completes any required camera calibration before you drive away.
Your specialist confirms the minimum drive-away time based on the adhesive used; we recommend letting the bond fully cure before long journeys.
You're covered by our two-year warranty on workmanship and glass quality from the date of replacement.
From quote to fitted glass, the whole process is transparent and hassle-free — that's why thousands of drivers trust UK Car Glass to arrange their windscreen replacement.
Most Aygo windscreen replacements can be completed at your home or workplace with a mobile fitter. However, if your model includes a Toyota Safety Sense camera system, your replacement must be fitted at a workshop so that static calibration can be performed indoors using target boards.
We schedule the entire job—glass replacement and calibration—at a single workshop location to ensure the safety-critical alignment is properly completed and documented.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
We confirm the exact procedure for your specific vehicle when you book.
A glass variant made specifically for right-hand-drive vehicles like UK cars, with brackets and sensors positioned for the driver's side.
Right-hand-drive glass is a windscreen (or other glass panel) manufactured to the correct specification for vehicles where the steering wheel and driver controls are on the right side of the car. The key difference isn't the glass itself but the position of brackets, sensor mounting pads, and sometimes a VIN (Vehicle Identification Number) notch. These are placed on the dashboard side to align with right-hand-drive vehicle architecture. Using the correct variant ensures all safety systems, mounting points, and sensor arrays sit in the right place when the glass is fitted.
Check your vehicle's specification sheet or service handbook — it will confirm 'RHD' (right-hand drive). Ask your dealership or service centre which windscreen variant they stock for your model. If you're unsure, provide us with your registration number when you book; we'll identify the correct part.
UKCG stocks the UK-specific right-hand-drive variant, so all brackets, sensors, and mounting points align correctly during fitting. Using a left-hand-drive part on a right-hand-drive vehicle would result in misalignment of camera brackets, rain sensors, or other dashboard-mounted components. We confirm you receive the correct RHD variant before dispatch.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
We confirm the exact procedure for your specific vehicle when you book.
LIDAR helps your car sense its surroundings for advanced safety and driver-assistance features.
LIDAR (Light Detection and Ranging) is a sensor technology that uses laser beams to detect objects, obstacles, and road features in three dimensions. It creates a detailed map of the vehicle's surroundings in real time, enabling advanced driver-assistance systems (ADAS) such as adaptive cruise control, collision avoidance, and autonomous emergency braking. LIDAR complements camera and radar systems by providing precise distance and depth information, even in poor visibility or low-light conditions. It is increasingly fitted to modern vehicles as part of their safety and autonomous-capability infrastructure.
Check your vehicle's handbook or contact your dealership to confirm LIDAR fitment. LIDAR sensors are typically mounted on the roof, bumpers, or within the windscreen/rear-window frame area. You may see reference to 'LIDAR', 'laser radar', or specific safety-feature names (e.g. 'adaptive cruise control', 'autonomous emergency braking') that rely on LIDAR in your documentation.
If your windscreen or rear window houses or frames a LIDAR sensor, replacement requires careful handling to preserve or recalibrate the sensor post-fit. LIDAR calibration procedures vary significantly by vehicle make, model, and year—some require static alignment using specialist target equipment, others demand dynamic road-drive procedures, and some use a combination. We identify the exact calibration requirement when we look up your specific vehicle and confirm it with you before booking.
OEM glass is manufactured by your vehicle's original maker and meets exact factory specifications.
OEM (Original Equipment Manufacturer) glass is produced by the same manufacturer that supplied your vehicle when it was built. It matches your car's original windscreen or window precisely — same optical properties, tinting, coatings, and integration with any embedded features like cameras or sensors. OEM glass is the highest specification available and carries full manufacturer traceability.
Check your vehicle's service records or ask your dealership service centre whether your current glass is OEM or aftermarket. The dealership parts department can also confirm OEM availability for your specific make, model, and year. Some vehicles have OEM glass marked with manufacturer codes on the edge, though these aren't always visible after installation.
OEM glass typically costs more than aftermarket alternatives but guarantees perfect fitment and optical performance. Lead times may be longer because OEM stock is ordered directly from the vehicle manufacturer rather than held in local distributor inventory. If your vehicle has embedded features (cameras, sensors, coatings), OEM glass ensures compatibility. Calibration requirements remain unchanged — any ADAS or sensor calibration needed depends on your specific vehicle, not on whether glass is OEM or aftermarket.
Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.
A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.
Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.
Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.
We confirm the exact procedure for your specific vehicle when you book.
A modified black-printed area around the rear-view mirror to suit your vehicle's camera or sensor layout.
Silkscreen modification refers to a variation in the black-printed area (called the 'frit') that surrounds the rear-view mirror on your windscreen. This printed zone is shaped to accommodate your vehicle's specific camera, sensor, or ADAS equipment layout. Different vehicles — even within the same model range — may have different camera positions or sensor configurations, requiring a bespoke print pattern. A silkscreen-modified windscreen is a distinct part with its own part number and cannot be used interchangeably with the standard print variant.
Check your windscreen documentation or the original part number — dealership service records will confirm whether your windscreen carries a modified silkscreen. You can also ask your dealer's parts department to confirm the exact print variant for your vehicle's year and specification. The modification itself is visible as the black-printed border around the mirror area, but identifying whether it's 'modified' requires checking the part number rather than visual inspection alone.
When your windscreen requires replacement, we must source the correct silkscreen variant for your specific vehicle to ensure proper camera and sensor clearance. Using an incorrect print variant could obstruct camera fields of view or interfere with sensor operation, compromising ADAS functionality and safety. We confirm the exact part number during the booking process to guarantee the correct glass is supplied and fitted. No additional calibration is triggered by the silkscreen modification itself; any calibration needed relates to the camera or sensor system, not the print.
Static calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.
Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.
Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu. If your vehicle manual mentions 'camera calibration' or 'static target calibration', static calibration is likely part of your windscreen replacement service.
When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.
The Toyota Aygo has been in continuous production since 2005, spanning three generations of affordable city cars. Early models carried straightforward laminated windscreens with green tint and solar-control coating as standard.
From the 2018 facelift onwards, Toyota Safety Sense began appearing on higher-trim variants, introducing forward-facing cameras and associated windscreen features like sensor heating zones and static calibration requirements. Modern Aygo windscreens feature these same green and solar-control properties across all current variants, with cameras present on roughly one-third of the models in our catalogue.
Own a different Toyota? We've got you — every variant, every year.
The questions customers ask us most often.
