Instant quote for your 2009–2013 Seat Exeo windscreen in under 60 seconds, fitted by approved fitters near you.
Make
Seat
Model
Exeo
No card required · Free to quote
Price variation across Exeo variants reflects differences in glass features — models with acoustic and solar-control glass command higher costs than those with standard clear or green-tinted variants. The presence of a grey sun strip and rain-sensor compatibility also influence the final quote, as these features require matched factory specifications.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2013 | £356 — £552 | 3 variants | Price my 2013 |
| 2012 | £356 — £552 | 3 variants | Price my 2012 |
| 2011 | £356 — £552 | 3 variants | Price my 2011 |
| 2010 | £356 — £552 | 3 variants | Price my 2010 |
| 2009 | £356 — £552 | 3 variants | Price my 2009 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Exeos can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Exeo windscreen replacement through UKCG is straightforward and takes just minutes.
Answer a short quiz about your Exeo's year and trim to identify your exact windscreen variant — takes under a minute.
Receive an instant quote tailored to your glass specification.
Complete your booking online with a convenient appointment time that suits you.
Our parts-check team verifies your windscreen details to confirm the right glass is sourced.
A technician from our network visits at your chosen time — mobile fitting at your address or at a workshop, depending on your preference.
Your windscreen is fitted (typically 45–90 minutes of the fitter's time) and you receive a two-year warranty on workmanship and glass quality.
From quote to booking, the whole process takes under two minutes — and your new windscreen is fitted by a trusted local specialist.
The Exeo came with no ADAS camera systems, so all replacements are straightforward and can be fitted mobile at your home or workplace. No calibration is required after fitting, which means the technician can complete the job and hand you your keys without needing workshop equipment. If you prefer a workshop appointment for convenience or weather reasons, that's available too — the choice is yours.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A grey-tinted band across the top of your windscreen that reduces glare from sunlight and reflections above.
A grey sun strip is a tinted gradient band built into the top edge of the windscreen during manufacture. It sits within the laminated glass layers and gradually fades from opaque grey at the very top to clear further down. The strip is designed to reduce glare and reflections from sunlight, street lights, and oncoming headlights, improving comfort and visibility for the driver without obstructing the view of traffic signals or overhead hazards. Sun strips are a factory-applied feature unique to windscreens—they cannot be added to side or rear glass because those are typically toughened rather than laminated.
Look at the top of your windscreen from inside the vehicle. You will see a grey-tinted band that fades to clear glass. The tint is gradual and integral to the glass itself, not a removable film or coating. Your vehicle's service records or handbook may also list it as a standard feature. If unsure, ask your dealer or service centre whether your specific model includes a sun strip.
When replacing a windscreen with a sun strip, the replacement glass must be sourced in the exact matching variant—including the sun-strip tint and fade profile. Aftermarket and OE glass are both available for most vehicles, but the variant must be correct to match your original. There is no calibration required for the sun strip itself. If your windscreen also carries camera or sensor features, those will be calibrated separately according to your vehicle's needs.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
The Seat Exeo was in production from 2009 to 2013 as a compact saloon built on the VW Group platform. All models in this range featured laminated windscreens with a VIN notch at the base.
Most variants came equipped with a grey sun strip to reduce glare from above, and around two-thirds featured rain sensors for automatic wiper activation. Some models also carried acoustic glass for improved cabin quietness, along with green tint — a factory feature that's barely visible to the eye but affects how light filters into the cabin.
No ADAS camera systems were fitted to the Exeo, so your replacement windscreen will not require post-fit calibration. This keeps the fitting straightforward and mobile-friendly.
Own a different Seat? We've got you — every variant, every year.
The questions customers ask us most often.
