MH
Michael H.
Verified on Trustpilot30 Mar 2023
Great service
Showed up on time Fast & friendly service No clean up required after fitting the new windshield 100% I would use again, hope I don’t have too, but you never know
Peugeot Partner windscreen replacement — booked online.
Instant quote across 11 Peugeot Partner variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £263 to £649
4.82 / 5 ·
1,422 Trustpilot reviews
Get your quote
Under 60 secondsMake
Peugeot
Model
Partner
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Peugeot Partner windscreen price, by year
Pricing varies with generation, ADAS equipment, and glass specification. Early Partner models without driver assistance systems are typically the most affordable to replace. Later generations with solar-control coatings, acoustic glass (identified by Peugeot's L3P option code), or front-camera systems carry higher replacement costs — particularly when calibration is required after fitting.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £297 — £649 | 5 variants | Price my 2026 |
| 2025 | £297 — £649 | 5 variants | Price my 2025 |
| 2024 | £297 — £649 | 5 variants | Price my 2024 |
| 2023 | £297 — £649 | 5 variants | Price my 2023 |
| 2022 | £297 — £649 | 5 variants | Price my 2022 |
| 2021 | £297 — £649 | 5 variants | Price my 2021 |
| 2020 | £297 — £649 | 5 variants | Price my 2020 |
| 2019 | £297 — £649 | 5 variants | Price my 2019 |
| 2018 | £297 — £649 | 7 variants | Price my 2018 |
| 2017 | £297 — £480 | 4 variants | Price my 2017 |
| 2016 | £297 — £480 | 4 variants | Price my 2016 |
| 2015 | £297 — £480 | 4 variants | Price my 2015 |
| 2014 | £297 — £480 | 4 variants | Price my 2014 |
| 2013 | £297 — £480 | 4 variants | Price my 2013 |
| 2012 | £297 — £480 | 5 variants | Price my 2012 |
| 2011 | £297 — £480 | 5 variants | Price my 2011 |
| 2010 | £297 — £480 | 5 variants | Price my 2010 |
| 2009 | £297 — £480 | 5 variants | Price my 2009 |
| 2008 | £263 — £480 | 8 variants | Price my 2008 |
| 2007 | £263 — £371 | 3 variants | Price my 2007 |
| 2006 | £263 — £371 | 3 variants | Price my 2006 |
| 2005 | £263 — £371 | 3 variants | Price my 2005 |
| 2004 | £263 — £371 | 3 variants | Price my 2004 |
| 2003 | £263 — £371 | 3 variants | Price my 2003 |
| 2002 | £263 — £371 | 3 variants | Price my 2002 |
| 2001 | £263 — £371 | 3 variants | Price my 2001 |
| 2000 | £371 — £371 | 1 variant | Price my 2000 |
| 1999 | £371 — £371 | 1 variant | Price my 1999 |
| 1998 | £371 — £371 | 1 variant | Price my 1998 |
| 1997 | £371 — £371 | 1 variant | Price my 1997 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Partners can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
What Peugeot Partner owners say
4.83/5 across 6 verified Peugeot Partner owners
Showing 6 reviews from verified Peugeot Partner owners. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
What to expect during your Peugeot Partner windscreen replacement
Booking your Peugeot Partner windscreen replacement takes just minutes, and the entire process from quote to fitting follows a straightforward path.
- 1
Get an instant quote through our online widget by answering a few quick questions about your Partner variant.
- 2
Complete your booking in under two minutes — we'll match you with a trusted local technician in your area.
- 3
Our team runs a parts check to confirm the exact windscreen specification (tint, features, trim type) before the fitting day.
- 4
Your fitter attends at your chosen location — mobile at home or at a workshop — and replaces the glass in typically 45–90 minutes.
- 5
If your model has a front camera, static calibration is completed on the day using specialist diagnostic equipment.
- 6
Your fitter confirms the minimum drive-away time before leaving, and you're covered by our two-year warranty on workmanship and glass quality.
From quote to finished job, you're supported by our network of vetted technicians and backed by a comprehensive warranty.
Mobile fitting or workshop visit for your Partner?
Most Peugeot Partner windscreen replacements can be fitted at your home or workplace on a mobile basis. However, if your model is equipped with a front camera (part of Drive Assist Plus), calibration is required after the glass is fitted.
When calibration is needed, the entire job — replacement and calibration together — is carried out at a workshop using specialist diagnostic equipment. We don't split the job across locations because keeping both steps in one visit ensures the safety-critical calibration is completed properly.
We confirm the specific answer for your vehicle when you book.
What features does your Partner have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Vin Notch8
2008–2026A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
What it means
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
How to tell
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
Replacement impact
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Encapsulation7
2008–2026Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
What it means
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
How to tell
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Replacement impact
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Green7
2001–2026Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar Control7
2001–2026Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Clear4
1997–2018Calibration varies by vehicleClear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Calibration mix across our Peugeot variants
- 1None
We confirm the exact procedure for your specific vehicle when you book.
Rain Sensor4
2008–2026No calibration after replacementYour wipers automatically activate when rain falls on the windscreen.
What it means
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
How to tell
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Replacement impact
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Coating3
1997–2018Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
What it means
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
How to tell
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
Replacement impact
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
Camera2
2018–2026Calibration varies by vehicleA camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
What it means
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
How to tell
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Replacement impact
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Acoustic (Noise reduction)1
2018–2026Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
What it means
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
How to tell
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Replacement impact
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Bracket For Safety Features1
2018–2026Calibration varies by vehicleThe moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Fitting Hardware1
2018–2026Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
What it means
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
How to tell
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Replacement impact
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
About the Peugeot Partner
The Peugeot Partner has been in continuous production since 1997, evolving through multiple generations as a practical light commercial vehicle. Windscreen specifications vary significantly across its model range, with most variants carrying a VIN notch along the bottom and many featuring green-tinted glass as standard.
Modern Partner models from the mid-2010s onwards increasingly feature encapsulated trim (bonded directly to the glass), solar-control glass to reduce cabin heat, and rain sensors for automatic wiper activation. Later generations introduced front-facing cameras as part of Peugeot's Drive Assist Plus safety suite, which requires specialist calibration after windscreen replacement.
Other Peugeot models
Own a different Peugeot? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.