JB
James B.
Verified on Trustpilot25 Mar 2026
Good service.
Good service.
Nissan Micra windscreen replacement — booked online.
Instant quote across 18 Nissan Micra variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £310 to £741
4.82 / 5 ·
1,456 Trustpilot reviews
Get your quote
Under 60 secondsMake
Nissan
Model
Micra
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Nissan Micra windscreen price, by year
Prices vary with generation and equipment — early-2010s models without cameras are the most affordable; later models with ProPILOT Assist carry higher calibration costs. Acoustic glass, solar control, and blue sun-strip options are also available on select trims, which affect pricing.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £394 — £679 | 2 variants | Price my 2026 |
| 2025 | £394 — £679 | 2 variants | Price my 2025 |
| 2024 | £394 — £679 | 2 variants | Price my 2024 |
| 2023 | £394 — £679 | 2 variants | Price my 2023 |
| 2022 | £394 — £679 | 2 variants | Price my 2022 |
| 2021 | £394 — £679 | 2 variants | Price my 2021 |
| 2020 | £420 — £741 | 3 variants | Price my 2020 |
| 2019 | £420 — £741 | 3 variants | Price my 2019 |
| 2018 | £420 — £741 | 3 variants | Price my 2018 |
| 2017 | £349 — £741 | 5 variants | Price my 2017 |
| 2016 | £349 — £412 | 4 variants | Price my 2016 |
| 2015 | £349 — £412 | 4 variants | Price my 2015 |
| 2014 | £349 — £412 | 4 variants | Price my 2014 |
| 2013 | £349 — £412 | 4 variants | Price my 2013 |
| 2012 | £349 — £412 | 4 variants | Price my 2012 |
| 2011 | £349 — £412 | 4 variants | Price my 2011 |
| 2010 | £310 — £442 | 3 variants | Price my 2010 |
| 2009 | £310 — £442 | 3 variants | Price my 2009 |
| 2008 | £310 — £442 | 3 variants | Price my 2008 |
| 2007 | £310 — £442 | 3 variants | Price my 2007 |
| 2006 | £310 — £442 | 3 variants | Price my 2006 |
| 2005 | £310 — £442 | 3 variants | Price my 2005 |
| 2004 | £310 — £358 | 2 variants | Price my 2004 |
| 2003 | £310 — £438 | 5 variants | Price my 2003 |
| 2002 | £372 — £438 | 3 variants | Price my 2002 |
| 2001 | £372 — £438 | 3 variants | Price my 2001 |
| 2000 | £372 — £438 | 3 variants | Price my 2000 |
| 1999 | £372 — £438 | 3 variants | Price my 1999 |
| 1998 | £372 — £438 | 3 variants | Price my 1998 |
| 1997 | £372 — £438 | 3 variants | Price my 1997 |
| 1996 | £372 — £438 | 3 variants | Price my 1996 |
| 1995 | £372 — £438 | 3 variants | Price my 1995 |
| 1994 | £372 — £438 | 3 variants | Price my 1994 |
| 1993 | £372 — £438 | 3 variants | Price my 1993 |
| 1992 | £287 — £442 | 3 variants | Price my 1992 |
| 1991 | £287 — £442 | 3 variants | Price my 1991 |
| 1990 | £287 — £442 | 3 variants | Price my 1990 |
| 1989 | £287 — £442 | 3 variants | Price my 1989 |
| 1988 | £287 — £442 | 3 variants | Price my 1988 |
| 1987 | £287 — £442 | 3 variants | Price my 1987 |
| 1986 | £287 — £442 | 3 variants | Price my 1986 |
| 1985 | £287 — £442 | 3 variants | Price my 1985 |
| 1984 | £287 — £442 | 3 variants | Price my 1984 |
| 1983 | £287 — £442 | 3 variants | Price my 1983 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Micras can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
What Nissan Micra owners say
5.00/5 across 7 verified Nissan Micra owners
Showing 7 reviews from verified Nissan Micra owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
What to expect during your Nissan Micra windscreen replacement
Booking your Micra windscreen replacement takes just a few straightforward steps.
- 1
Start with our guided quote widget — select your Micra's generation, trim features, and any ADAS equipment. The quote is instant and takes under a minute.
- 2
Review your quote and proceed to online checkout. Full booking is completed in under two minutes.
- 3
Our parts-check team confirms your exact windscreen variant (tint, sensors, brackets, camera configuration) matches your Micra's specification.
- 4
You're matched with an independent specialist near you — either for a mobile visit at your address or a workshop appointment, depending on whether calibration is required.
- 5
On fitting day, the technician replaces the glass, secures the seal, and (if your Micra has ProPILOT Assist) performs static camera calibration. The fitter confirms your drive-away time before leaving.
- 6
Your replacement is backed by a two-year warranty covering workmanship and glass quality.
All done — you're back on the road with a matched replacement and peace of mind.
Mobile fitting or workshop visit for your Micra?
Most Micra windscreen replacements can be done mobile at your address. However, if your Micra is equipped with ProPILOT Assist and a forward camera, static calibration is required after replacement — this typically needs a workshop with target boards and a controlled environment.
Following UKCG's no-split policy, the entire job (replacement and calibration) is scheduled at one location. Your technician will confirm this during booking, and calibration doesn't extend your drive-away time since it runs in parallel with adhesive cure.
We confirm the specific answer for your vehicle when you book.
What features does your Micra have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green15
1983–2026Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Vin Notch12
2003–2026A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
What it means
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
How to tell
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
Replacement impact
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Right Hand Drive Part7
2011–2026A glass variant made specifically for right-hand-drive vehicles like UK cars, with brackets and sensors positioned for the driver's side.
What it means
Right-hand-drive glass is a windscreen (or other glass panel) manufactured to the correct specification for vehicles where the steering wheel and driver controls are on the right side of the car. The key difference isn't the glass itself but the position of brackets, sensor mounting pads, and sometimes a VIN (Vehicle Identification Number) notch. These are placed on the dashboard side to align with right-hand-drive vehicle architecture. Using the correct variant ensures all safety systems, mounting points, and sensor arrays sit in the right place when the glass is fitted.
How to tell
Check your vehicle's specification sheet or service handbook — it will confirm 'RHD' (right-hand drive). Ask your dealership or service centre which windscreen variant they stock for your model. If you're unsure, provide us with your registration number when you book; we'll identify the correct part.
Replacement impact
UKCG stocks the UK-specific right-hand-drive variant, so all brackets, sensors, and mounting points align correctly during fitting. Using a left-hand-drive part on a right-hand-drive vehicle would result in misalignment of camera brackets, rain sensors, or other dashboard-mounted components. We confirm you receive the correct RHD variant before dispatch.
Rain Sensor6
2003–2026No calibration after replacementYour wipers automatically activate when rain falls on the windscreen.
What it means
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
How to tell
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Replacement impact
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Acoustic (Noise reduction)3
2017–2020Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
What it means
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
How to tell
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Replacement impact
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Blue Sun Strip2
1983–2003A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
What it means
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
How to tell
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
Replacement impact
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Camera2
2017–2026Calibration varies by vehicleA camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
What it means
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
How to tell
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Replacement impact
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Clear2
1983–2003Calibration varies by vehicleClear windscreen glass has no tint; most cars have a slight tint as standard.
What it means
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
How to tell
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. If the side glass appears colourless, your windscreen is likely clear. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Replacement impact
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
Solar Control2
2021–2026Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Blue1
1983–1992Blue-tinted windscreens reduce glare and heat while maintaining a subtle, modern appearance.
What it means
A blue tint is a light coloration applied to the windscreen glass, usually during manufacture. It reduces solar heat transmission and glare from sunlight, particularly on bright days or when driving into the sun. The tint is integral to the glass itself — not a separate film — and is chosen by the vehicle manufacturer to balance comfort, visibility, and aesthetic consistency with the vehicle's side windows and rear window. Most vehicles come with a green or blue tint as standard; the choice depends on the manufacturer's design and regional climate considerations.
How to tell
Check your side windows by rolling one halfway down and holding a white piece of paper behind the glass. If you see a blue tint reflected in the glass, your windscreen will have the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen tint specification. The tint is visible when comparing the windscreen to clear glass, though it may be subtle and harder to spot on overcast days.
Replacement impact
Blue-tinted replacement windscreens must match the original tint to maintain visual consistency with your side and rear windows. Most replacement glass is available in the correct tint through OE (original equipment) suppliers. There is no calibration requirement related to tint. The tint does not affect fitting time, cure time, or drive-away schedules. Ensure the replacement windscreen is specified with the blue tint to avoid a mismatched appearance.
Bracket For Safety Features1
2021–2026Calibration varies by vehicleThe moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Fitting Hardware1
2021–2026Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
What it means
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
How to tell
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Replacement impact
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Other Hardware1
2017–2020Factory-fitted brackets and mounts bonded to the glass, pre-assembled and ready to fit without sub-assembly.
What it means
Other Hardware refers to factory-fitted brackets, mounts, connectors, or trim pieces bonded permanently to the windscreen or other glass during manufacturing. These are integral to the vehicle's design but do not activate or control a specific feature — they simply secure or position components like sensors, trim strips, or mounting points. Unlike feature-specific hardware, these items are passive structural elements. A replacement carrying Other Hardware arrives pre-bonded and ready to install without additional assembly or modification.
How to tell
Check your vehicle documentation or ask your dealership service centre whether your windscreen or glass panel carries factory-bonded brackets or mounts. Visual inspection may reveal trim strips, sensor housings, or antenna mounts bonded to the edges or interior surface of the glass. Your original invoice or parts list will specify if Other Hardware is present.
Replacement impact
Replacement glass carrying Other Hardware must be sourced as a complete assembly — the brackets and mounts come pre-bonded from the supplier and cannot be transferred from the old glass. Installation is straightforward: the fitter removes the old glass and fits the replacement with its hardware already in place. No additional sub-assembly, bonding, or recalibration of the hardware itself is required. Fitting time is unaffected.
Sensor Heated Zone1
2011–2017Calibration varies by vehicleHeated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.
What it means
A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.
How to tell
Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.
Replacement impact
Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.
Calibration mix across our Nissan variants
- 1None
We confirm the exact procedure for your specific vehicle when you book.
Silkscreen Modification1
2011–2017A modified black-printed area around the rear-view mirror to suit your vehicle's camera or sensor layout.
What it means
Silkscreen modification refers to a variation in the black-printed area (called the 'frit') that surrounds the rear-view mirror on your windscreen. This printed zone is shaped to accommodate your vehicle's specific camera, sensor, or ADAS equipment layout. Different vehicles — even within the same model range — may have different camera positions or sensor configurations, requiring a bespoke print pattern. A silkscreen-modified windscreen is a distinct part with its own part number and cannot be used interchangeably with the standard print variant.
How to tell
Check your windscreen documentation or the original part number — dealership service records will confirm whether your windscreen carries a modified silkscreen. You can also ask your dealer's parts department to confirm the exact print variant for your vehicle's year and specification. The modification itself is visible as the black-printed border around the mirror area, but identifying whether it's 'modified' requires checking the part number rather than visual inspection alone.
Replacement impact
When your windscreen requires replacement, we must source the correct silkscreen variant for your specific vehicle to ensure proper camera and sensor clearance. Using an incorrect print variant could obstruct camera fields of view or interfere with sensor operation, compromising ADAS functionality and safety. We confirm the exact part number during the booking process to guarantee the correct glass is supplied and fitted. No additional calibration is triggered by the silkscreen modification itself; any calibration needed relates to the camera or sensor system, not the print.
Static Camera Calibration Process1
2017–2020Static calibration requiredStatic calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.
What it means
Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.
How to tell
Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu. If your vehicle manual mentions 'camera calibration' or 'static target calibration', static calibration is likely part of your windscreen replacement service.
Replacement impact
When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.
About the Nissan Micra
The Nissan Micra has been in continuous production since 1983, evolving through five generations. Earlier models carry straightforward laminated windscreens, while later Micras from the mid-2010s onwards feature green-tinted glass, VIN notches, and rain sensors on select variants.
From around 2020, newer Micra models began featuring ADAS systems — specifically ProPILOT Assist — which rely on a windscreen-mounted forward camera for lane-centring and intelligent cruise control. These camera-equipped variants require static calibration after windscreen replacement.
Other Nissan models
Own a different Nissan? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.