Instant quote across 8 Hyundai ix20 variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Hyundai
Model
ix20
No card required · Free to quote
Price variation across ix20 variants reflects generation differences and feature uptake — early models without heated glass or rain sensors are typically the most accessible. Later models with heated windscreens and sensors, plus those requiring ADAS calibration, carry higher costs reflecting the added technician time and specialist equipment needed.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2020 | £343 — £453 | 8 variants | Price my 2020 |
| 2019 | £343 — £453 | 8 variants | Price my 2019 |
| 2018 | £343 — £453 | 8 variants | Price my 2018 |
| 2017 | £343 — £453 | 8 variants | Price my 2017 |
| 2016 | £343 — £453 | 8 variants | Price my 2016 |
| 2015 | £343 — £453 | 8 variants | Price my 2015 |
| 2014 | £343 — £453 | 8 variants | Price my 2014 |
| 2013 | £343 — £453 | 8 variants | Price my 2013 |
| 2012 | £343 — £453 | 8 variants | Price my 2012 |
| 2011 | £343 — £453 | 8 variants | Price my 2011 |
| 2010 | £343 — £453 | 8 variants | Price my 2010 |
| 2009 | £453 — £453 | 1 variant | Price my 2009 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older ix20s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Showing 1 review from verified Hyundai ix20 owners. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your ix20 windscreen replacement is straightforward and happens in just a few stages.
Answer a quick quiz about your model year, trim, and whether your windscreen has a camera bracket — this takes under a minute online.
Receive an instant quote and choose a fitting date that suits you.
Our parts-check team confirms your exact glass specification, ensuring heated elements, sensors, and brackets align correctly.
A technician from our network is matched to your location and arrives mobile or at a workshop depending on whether ADAS calibration is needed.
The windscreen is replaced, and if your ix20 has SmartSense, calibration runs in parallel — you're ready to drive away once the fitter confirms the adhesive cure time.
You're covered by a two-year warranty on workmanship and glass quality.
Book now and drive with confidence — your replacement is backed by our network of trusted specialists.
Most ix20 windscreen replacements can be done at your location on a mobile basis. However, if your model is equipped with Hyundai SmartSense (the front camera system for lane-keeping and collision avoidance), the technician will need a workshop environment to perform static camera calibration using Hyundai diagnostic equipment — this ensures the system functions safely and correctly.
We never split a job across locations, so if calibration is required, both the replacement and calibration are scheduled at a workshop in one visit. Your fitter will advise during booking whether a workshop is necessary for your specific variant.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.
A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.
Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.
When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A glass variant made specifically for right-hand-drive vehicles like UK cars, with brackets and sensors positioned for the driver's side.
Right-hand-drive glass is a windscreen (or other glass panel) manufactured to the correct specification for vehicles where the steering wheel and driver controls are on the right side of the car. The key difference isn't the glass itself but the position of brackets, sensor mounting pads, and sometimes a VIN (Vehicle Identification Number) notch. These are placed on the dashboard side to align with right-hand-drive vehicle architecture. Using the correct variant ensures all safety systems, mounting points, and sensor arrays sit in the right place when the glass is fitted.
Check your vehicle's specification sheet or service handbook — it will confirm 'RHD' (right-hand drive). Ask your dealership or service centre which windscreen variant they stock for your model. If you're unsure, provide us with your registration number when you book; we'll identify the correct part.
UKCG stocks the UK-specific right-hand-drive variant, so all brackets, sensors, and mounting points align correctly during fitting. Using a left-hand-drive part on a right-hand-drive vehicle would result in misalignment of camera brackets, rain sensors, or other dashboard-mounted components. We confirm you receive the correct RHD variant before dispatch.
The Hyundai ix20 has been in continuous production since 2009, bridging the compact MPV and crossover segments with a practical, spacious interior. Early models carry straightforward laminated windscreens with VIN notches, whilst all variants feature green-tinted glass and solar-control coating to manage cabin heat.
From the mid-2010s onwards, some ix20 variants introduced heated windscreens and rain sensors as optional features, enhancing comfort and safety. Later models in the range benefited from these additions, though uptake varies by trim and market specification.
SmartSense camera-equipped ix20s require windscreen recalibration after replacement — specialists on our network handle this using Hyundai diagnostic tools, ensuring lane-keeping and collision-avoidance systems perform correctly.
Own a different Hyundai? We've got you — every variant, every year.
The questions customers ask us most often.
