Ford Tourneo Connect windscreen replacement — booked online.

What to expect during your Ford Tourneo Connect windscreen replacement

Booking your Tourneo Connect windscreen replacement through UK Car Glass is straightforward — guided quiz, instant quote, technician match, and fitting on your preferred date.

1. 1

   Complete a quick online quiz selecting your Tourneo Connect's year, spec level, and any visible features. The system identifies your exact variant in under 60 seconds.

2. 2

   Receive an instant quote tailored to your model's glass specification — heating, sensors, acoustic properties, and any ADAS calibration needs are factored in.

3. 3

   Choose your fitting date and location (mobile at your address or at a workshop). Your quote is held; no deposit needed until you book.

4. 4

   On fitting day, the technician assigned to your booking arrives with your pre-checked glass, fitted to factory spec. For non-ADAS variants, fitting typically takes 45–90 minutes; camera-equipped models may take longer as calibration is completed after the glass is set.

5. 5

   If calibration is required, it runs in parallel with adhesive cure, so drive-away time is confirmed by your technician before they leave.

6. 6

   You're covered by a two-year warranty on workmanship and glass quality. Any concerns are reported to us, and we arrange remediation.

Over 5,000 customers have booked through UK Car Glass; our Trustpilot rating and transparent pricing reflect a straightforward, customer-first process.

What features does your Tourneo Connect have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Green22

  2002–2026

  On the Ford Tourneo Connect: fitted on every one of the 22 windscreen variants we list; model years 2002–2026.

  What it means

  Nearly all Tourneo Connect windscreens carry a subtle green tint to reduce glare and solar heat. It's harder to spot than you'd expect, but it's there.

  On your Ford Tourneo Connect

  Confirmed during your parts check after you book. All modern Tourneo Connect windscreens include this tint.

• Vin Notch22

  2002–2026

  On the Ford Tourneo Connect: fitted on every one of the 22 windscreen variants we list; model years 2002–2026.

  What it means

  A small printed box along the bottom of the windscreen displaying your vehicle's chassis number (VIN). It's a factory safety marker and must be matched on replacement.

  On your Ford Tourneo Connect

  Look at the bottom edge of your current windscreen; you'll see the small box with numbers. Your replacement glass includes an identical notch.

• Solar Control15

  2014–2026

  On the Ford Tourneo Connect: fitted on 15 of the 22 windscreen variants we list (68%); model years 2014–2026.

  What it means

  A special coating that absorbs the sun's infrared rays, reducing cabin heat and glare on sunny days. Improves comfort and reduces air-conditioning load.

  On your Ford Tourneo Connect

  Present on select mid-range and higher trims, especially on models sold in sunnier regions. Confirmed during your parts check.

• Heated Windscreen14

  2002–2026

  On the Ford Tourneo Connect: fitted on 14 of the 22 windscreen variants we list (64%); model years 2002–2026.

  What it means

  An integrated mesh of thin heating wires that warm the glass to clear frost and condensation quickly on cold mornings. Found on higher-spec Tourneo Connect models.

  On your Ford Tourneo Connect

  Check your vehicle's specification sheet or look for a heating element symbol on your dashboard controls. Common on higher trim levels from the mid-2010s onwards.

• Rain Sensor11

  2009–2026No calibration after replacement

  On the Ford Tourneo Connect: fitted on 11 of the 22 windscreen variants we list (50%); model years 2009–2026; no calibration after replacement.

  What it means

  Allows your windscreen wipers to activate automatically when rain is detected, without manual operation. On newer Fords with Co-Pilot360, this function is integrated into the forward-facing camera system.

  On your Ford Tourneo Connect

  Test your wipers in light rain or mist — they should activate without you touching the stalk. Confirmed in your booking details if equipped.

• Vehicle Emergency Messaging8

  2014–2026

  On the Ford Tourneo Connect: fitted on 8 of the 22 windscreen variants we list (36%); model years 2014–2026.

  Emergency messaging systems alert the emergency services immediately after a serious crash, reducing response time.

  What it means

  An emergency messaging system (sometimes called a 'Mayday' system) is an in-vehicle safety feature that automatically detects a serious collision and transmits emergency location data to the relevant emergency services. When a major impact is detected, the system sends the vehicle's precise GPS coordinates and other crash details to emergency responders, reducing the critical time between the accident and the arrival of medical assistance. This technology is designed to save lives by ensuring rapid response, particularly in situations where the occupants may be unconscious or unable to make a call themselves.

  How to tell

  Check your vehicle's user manual or infotainment system for emergency call or 'eCall' settings. Many vehicles display an emergency services icon in the dashboard menu or settings. You can also ask your dealership or service centre directly whether your model includes this feature — they'll confirm it's present and explain how to register or activate it if needed.

  Replacement impact

  Emergency messaging systems typically involve a control module or sensors in the vehicle structure, but do not require calibration or special handling during windscreen replacement. The system remains fully functional after glass replacement. No cure-time implications or OE-only glass sourcing is triggered by this feature. Standard replacement procedures apply.

• Camera4

  2014–2026Calibration varies by vehicle

  On the Ford Tourneo Connect: fitted on 4 of the 22 windscreen variants we list (18%); model years 2014–2026; calibration varies by vehicle.

  What it means

  A forward-facing camera mounted behind the windscreen that powers Ford Co-Pilot360 safety features — lane keeping, traffic sign recognition, and automatic emergency braking. Found on newer Tourneo Connect models.

  On your Ford Tourneo Connect

  Look for a triangular shape in the black trim area above the rear-view mirror. Present on 2020+ variants and higher-spec models equipped with driver-assistance packs.

  Calibration mix across our Ford variants

  • 1Dynamic

  We confirm the exact procedure for your specific vehicle when you book.

• Acoustic (Noise reduction)3

  2014–2026

  On the Ford Tourneo Connect: fitted on 3 of the 22 windscreen variants we list (14%); model years 2014–2026.

  Acoustic glass reduces cabin noise for a quieter, more comfortable ride.

  What it means

  Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.

  How to tell

  Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.

  Replacement impact

  Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.

• Bracket For Safety Features3

  2014–2026Calibration varies by vehicle

  On the Ford Tourneo Connect: fitted on 3 of the 22 windscreen variants we list (14%); model years 2014–2026; calibration varies by vehicle.

  The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.

  What it means

  A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.

  How to tell

  Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.

  Replacement impact

  On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.

  Calibration mix across our Ford variants

  • 1Dynamic

  We confirm the exact procedure for your specific vehicle when you book.

• LIDAR3

  2014–2026Bespoke calibration

  On the Ford Tourneo Connect: fitted on 3 of the 22 windscreen variants we list (14%); model years 2014–2026; bespoke calibration.

  LIDAR helps your car sense its surroundings for advanced safety and driver-assistance features.

  What it means

  LIDAR (Light Detection and Ranging) is a sensor technology that uses laser beams to detect objects, obstacles, and road features in three dimensions. It creates a detailed map of the vehicle's surroundings in real time, enabling advanced driver-assistance systems (ADAS) such as adaptive cruise control, collision avoidance, and autonomous emergency braking. LIDAR complements camera and radar systems by providing precise distance and depth information, even in poor visibility or low-light conditions. It is increasingly fitted to modern vehicles as part of their safety and autonomous-capability infrastructure.

  How to tell

  Check your vehicle's handbook or contact your dealership to confirm LIDAR fitment. LIDAR sensors are typically mounted on the roof, bumpers, or within the windscreen/rear-window frame area. You may see reference to 'LIDAR', 'laser radar', or specific safety-feature names (e.g. 'adaptive cruise control', 'autonomous emergency braking') that rely on LIDAR in your documentation.

  Replacement impact

  If your windscreen or rear window houses or frames a LIDAR sensor, replacement requires careful handling to preserve or recalibrate the sensor post-fit. LIDAR calibration procedures vary significantly by vehicle make, model, and year—some require static alignment using specialist target equipment, others demand dynamic road-drive procedures, and some use a combination. We identify the exact calibration requirement when we look up your specific vehicle and confirm it with you before booking.

• Mono Camera3

  2014–2026Calibration varies by vehicle

  On the Ford Tourneo Connect: fitted on 3 of the 22 windscreen variants we list (14%); model years 2014–2026; calibration varies by vehicle.

  A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.

  What it means

  A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.

  How to tell

  Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.

  Replacement impact

  When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.

  Calibration mix across our Ford variants

  • 1Dynamic

  We confirm the exact procedure for your specific vehicle when you book.

• Dynamic Camera Calibration Process2

  2014–2026Calibration varies by vehicle

  On the Ford Tourneo Connect: fitted on 2 of the 22 windscreen variants we list (9%); model years 2014–2026; calibration varies by vehicle.

  Dynamic calibration uses road driving to recalibrate your camera after windscreen replacement.

  What it means

  Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.

  How to tell

  Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.

  Replacement impact

  After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.

  Calibration mix across our Ford variants

  • 1Dynamic

  We confirm the exact procedure for your specific vehicle when you book.

• Green Sun Strip1

  2016–2026

  On the Ford Tourneo Connect: fitted on 1 of the 22 windscreen variants we list (5%); model years 2016–2026.

  A green-tinted band at the windscreen's top edge that reduces glare from sunlight above.

  What it means

  A green sun strip is a graduated tint band integrated into the windscreen's laminate at the upper edge. It filters intense sunlight and glare from above — particularly useful on motorways and in bright conditions — whilst maintaining clarity through the main viewing area below. The tint is permanent, fused into the laminate layer during manufacture, and cannot be applied or removed afterwards. Sun strips are a windscreen-only feature because they must be built into the laminate during production; side and rear glass cannot carry them as they are typically toughened rather than laminated.

  How to tell

  Look at the top edge of your windscreen from the inside. A sun strip appears as a distinct green-tinted gradient band that fades from darker at the very top to clear below. It is visible whether the car is parked or moving. You can also check your vehicle's specification sheet or ask your dealership or current service centre to confirm whether your windscreen includes a sun strip.

  Replacement impact

  The replacement windscreen must be the green sun strip variant to match your original. This is not a post-fit addition; it must be ordered as part of the glass itself. Availability is usually straightforward for current and recent models from major manufacturers, though older or less common variants may require a longer lead time. The sun strip does not affect calibration requirements or cure time — it is simply a laminate feature and does not complicate the fitting process.

• Heat Absorbing PVB1

  2009–2013

  On the Ford Tourneo Connect: fitted on 1 of the 22 windscreen variants we list (5%); model years 2009–2013.

  Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.

  What it means

  Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.

  How to tell

  Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.

  Replacement impact

  Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.

• Ford Fiesta From £230
• Ford Escort From £232
• Ford Transit From £260
• Ford Focus From £263
• Ford Transit Connect From £267
• Ford Ka From £275
• Ford Ranger From £296
• Ford Mondeo From £300
• Ford Galaxy From £307
• Ford Transit Courier From £307
• Ford Transit Custom From £312
• Ford Tourneo Custom From £320