Ford Galaxy windscreen replacement — booked online.

What to expect during your Ford Galaxy windscreen replacement

Here's how your Galaxy windscreen replacement unfolds from booking through to completion.

1. 1

   Complete a quick online quote through our widget—takes about a minute, no registration number needed. Our quiz identifies your exact Galaxy variant and its windscreen spec.

2. 2

   Our parts-check team verifies the glass specification (features, tint, camera bracket, any fitted hardware) matches your vehicle.

3. 3

   You're matched with a local technician in your area who specialises in your Galaxy's generation and any ADAS calibration required.

4. 4

   Your fitter arrives at your chosen location (mobile at home, or at a workshop if calibration needs a controlled environment). Fitting typically takes 45–90 minutes; calibration runs in parallel with adhesive cure.

5. 5

   Your fitter confirms the drive-away time before you leave—derived from the adhesive used and ambient conditions on the day.

6. 6

   Aftercare support: two-year warranty on workmanship and glass quality; contact UKCG if any concerns arise within that period.

Book with confidence—our specialists are matched to your specific Galaxy and its features.

What features does your Galaxy have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Vin Notch20

  1995–2023

  On the Ford Galaxy: fitted on 20 of the 21 windscreen variants we list (95%); model years 1995–2023.

  What it means

  A small box along the bottom of the windscreen displaying the vehicle's VIN (chassis number) for identification and security.

  On your Ford Galaxy

  Present on nearly all Galaxy models from 1995 onwards; confirmed during the parts check.

• Green17

  1995–2023

  On the Ford Galaxy: fitted on 17 of the 21 windscreen variants we list (81%); model years 1995–2023.

  What it means

  A subtle green tint in the laminated windscreen that's nearly invisible to the eye but filters UV and glare. About 9 in 10 modern cars carry this tint.

  On your Ford Galaxy

  Present on most Galaxy variants from mid-2000s onwards; confirmed during the parts check after you book.

• Acoustic (Noise reduction)15

  2006–2023

  On the Ford Galaxy: fitted on 15 of the 21 windscreen variants we list (71%); model years 2006–2023.

  What it means

  Special laminated interlayer that dampens road and wind noise, creating a quieter cabin. Look for the word 'Acoustic' or an ear symbol on the original glass.

  On your Ford Galaxy

  Fitted to higher-spec Galaxy trims and newer generations; confirmed during the parts check.

• Heated Windscreen13

  1996–2023

  On the Ford Galaxy: fitted on 13 of the 21 windscreen variants we list (62%); model years 1996–2023.

  What it means

  Integrated mesh of thin wires that heat the windscreen to clear frost and condensation quickly in cold weather.

  On your Ford Galaxy

  Optional on mid-range and higher Galaxy trims, particularly those from 2010 onwards; confirmed during the parts check.

• Rain Sensor10

  2006–2023No calibration after replacement

  On the Ford Galaxy: fitted on 10 of the 21 windscreen variants we list (48%); model years 2006–2023; no calibration after replacement.

  What it means

  Automatic wiper activation triggered by rain detection. On newer Co-Pilot360 Galaxy models, this function is handled by the forward-facing camera rather than a separate sensor.

  On your Ford Galaxy

  Found on Galaxy variants equipped with ADAS or fitted as an option on mid-to-higher trims; confirmed during the parts check.

• Camera5

  2010–2023Calibration varies by vehicle

  On the Ford Galaxy: fitted on 5 of the 21 windscreen variants we list (24%); model years 2010–2023; calibration varies by vehicle.

  What it means

  Forward-facing windscreen camera mounted in the black trim area near the rear-view mirror, part of Ford Co-Pilot360 driver assistance. Requires recalibration after windscreen replacement.

  On your Ford Galaxy

  Standard on 2020+ Galaxy models with Co-Pilot360; look for a triangular shape in the black field at the top of the windscreen.

• Clear4

  2006–2014Calibration varies by vehicle

  On the Ford Galaxy: fitted on 4 of the 21 windscreen variants we list (19%); model years 2006–2014; calibration varies by vehicle.

  Clear windscreen glass has no tint; most cars have a slight tint as standard.

  What it means

  A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.

  How to tell

  Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.

  Replacement impact

  Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.

  Calibration mix across our Ford variants

  • 1None

  We confirm the exact procedure for your specific vehicle when you book.

• Coating4

  2006–2014

  On the Ford Galaxy: fitted on 4 of the 21 windscreen variants we list (19%); model years 2006–2014.

  Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.

  What it means

  A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.

  How to tell

  Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.

  Replacement impact

  When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.

• Dynamic Camera Calibration Process4

  2010–2023Calibration varies by vehicle

  On the Ford Galaxy: fitted on 4 of the 21 windscreen variants we list (19%); model years 2010–2023; calibration varies by vehicle.

  Dynamic calibration uses road driving to recalibrate your camera after windscreen replacement.

  What it means

  Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.

  How to tell

  Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.

  Replacement impact

  After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.

• Mono Camera4

  2010–2023Calibration varies by vehicle

  On the Ford Galaxy: fitted on 4 of the 21 windscreen variants we list (19%); model years 2010–2023; calibration varies by vehicle.

  A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.

  What it means

  A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.

  How to tell

  Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.

  Replacement impact

  When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.

• Bracket For Safety Features3

  2010–2023Calibration varies by vehicle

  On the Ford Galaxy: fitted on 3 of the 21 windscreen variants we list (14%); model years 2010–2023; calibration varies by vehicle.

  The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.

  What it means

  A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.

  How to tell

  Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.

  Replacement impact

  On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.

• Heat Absorbing PVB2

  2015–2023

  On the Ford Galaxy: fitted on 2 of the 21 windscreen variants we list (10%); model years 2015–2023.

  Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.

  What it means

  Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.

  How to tell

  Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.

  Replacement impact

  Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.

• Sensor Heated Zone2

  2018–2023Calibration varies by vehicle

  On the Ford Galaxy: fitted on 2 of the 21 windscreen variants we list (10%); model years 2018–2023; calibration varies by vehicle.

  Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.

  What it means

  A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.

  How to tell

  Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.

  Replacement impact

  Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.

• Solar Control2

  2006–2015

  On the Ford Galaxy: fitted on 2 of the 21 windscreen variants we list (10%); model years 2006–2015.

  Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.

  What it means

  Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.

  How to tell

  Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.

  Replacement impact

  Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.

• Green Sun Strip1

  1996–2006

  On the Ford Galaxy: fitted on 1 of the 21 windscreen variants we list (5%); model years 1996–2006.

  A green-tinted band at the windscreen's top edge that reduces glare from sunlight above.

  What it means

  A green sun strip is a graduated tint band integrated into the windscreen's laminate at the upper edge. It filters intense sunlight and glare from above — particularly useful on motorways and in bright conditions — whilst maintaining clarity through the main viewing area below. The tint is permanent, fused into the laminate layer during manufacture, and cannot be applied or removed afterwards. Sun strips are a windscreen-only feature because they must be built into the laminate during production; side and rear glass cannot carry them as they are typically toughened rather than laminated.

  How to tell

  Look at the top edge of your windscreen from the inside. A sun strip appears as a distinct green-tinted gradient band that fades from darker at the very top to clear below. It is visible whether the car is parked or moving. You can also check your vehicle's specification sheet or ask your dealership or current service centre to confirm whether your windscreen includes a sun strip.

  Replacement impact

  The replacement windscreen must be the green sun strip variant to match your original. This is not a post-fit addition; it must be ordered as part of the glass itself. Availability is usually straightforward for current and recent models from major manufacturers, though older or less common variants may require a longer lead time. The sun strip does not affect calibration requirements or cure time — it is simply a laminate feature and does not complicate the fitting process.

• Ford Fiesta From £230
• Ford Escort From £232
• Ford Transit From £260
• Ford Focus From £263
• Ford Tourneo Connect From £267
• Ford Transit Connect From £267
• Ford Ka From £275
• Ford Ranger From £296
• Ford Mondeo From £300
• Ford Transit Courier From £307
• Ford Transit Custom From £312
• Ford Fusion From £314