EB
Emma B.
Verified on Trustpilot15 May 2026
I would highly recommend this company
I would highly recommend this company, good customer service, very good technician and one very happy customer
Peugeot 4007 rear window replacement — booked online.
Peugeot 4007 rear window replacement — instant quote across all variants, fitted by approved fitters — booked in under two minutes.
Prices from £1,340 to £1,340
4.82 / 5 ·
1,456 Trustpilot reviews
Get your quote
Under 60 secondsMake
Peugeot
Model
4007
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, factory-spec match
- 2-year workmanship warranty
Peugeot 4007 rear window price, by year
Rear-window pricing for the 4007 is straightforward, as all variants within the production run share the same basic rear-glass specification. Variation is minimal because the model predates the ADAS era and carries no integrated features like privacy tint or heated elements on the rear window. Your fitter will confirm the exact specification during the parts check after booking.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2012 | £1,340 — £1,340 | 1 variant | Price my 2012 |
| 2011 | £1,340 — £1,340 | 1 variant | Price my 2011 |
| 2010 | £1,340 — £1,340 | 1 variant | Price my 2010 |
| 2009 | £1,340 — £1,340 | 1 variant | Price my 2009 |
| 2008 | £1,340 — £1,340 | 1 variant | Price my 2008 |
| 2007 | £1,340 — £1,340 | 1 variant | Price my 2007 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 4007s can still be booked.
Recent UK Car Glass reviews
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
What to expect during your Peugeot 4007 rear window replacement
Rear-window replacement is a mobile-friendly job that your fitter can typically complete at your preferred location.
- 1
Complete an instant online quote through our guided widget in under 60 seconds — just a few quick questions about your 4007.
- 2
Review the quote and book your fitting slot; the whole booking takes under two minutes.
- 3
Our team matches you with an approved fitter in your area and runs a parts check to confirm your exact rear-glass variant.
- 4
Your fitter arrives at your address (or workshop if you prefer) with the replacement glass and removes the shattered original — shard cleanup is part of the job, though small fragments can lodge in places that need deeper access afterwards.
- 5
The new toughened rear window is fitted and sealed; your fitter confirms the car is ready to drive and any aftercare steps.
- 6
We recommend a professional valet or interior detailing in the days after fitting to ensure any fine glass particles are thoroughly removed.
Your replacement glass is backed by a two-year warranty covering workmanship and glass quality.
Mobile fitting or workshop visit for your 4007?
The Peugeot 4007 rear window is typically fitted mobile at your home or workplace because this generation has no ADAS camera to calibrate afterwards. Your fitter can bring all necessary tools and adhesive to complete the job on your driveway. If you prefer a workshop setting or live in an area where mobile access is difficult, arrange that preference during booking — either location works equally well.
We confirm the specific answer for your vehicle when you book.
What features does your 4007 have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Grey Privacy1
2007–2012Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
What it means
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
How to tell
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Replacement impact
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
Heated Rear Windscreen1
2007–2012Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
What it means
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
How to tell
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement impact
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
About the Peugeot 4007
The Peugeot 4007 was produced from 2007 to 2012 as a mid-size SUV, offering a practical rear-window design typical of its era. Early models carry straightforward toughened rear glass without integrated features, making replacement straightforward across the production run.
This generation predates Peugeot's front-camera ADAS era — the 4007 does not carry driver-assistance systems that would require windscreen-camera calibration. Rear-window replacement is therefore a standard glass-swap job with no additional electronic recalibration needed.
Other Peugeot models
Own a different Peugeot? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.