Rear window replacement for your Jaguar XE booked online in under two minutes — fitted by approved fitters across the UK.
Make
Jaguar
Model
XE
No card required · Free to quote
Pricing varies primarily based on whether your XE is equipped with the integrated antenna element and encapsulated trim — both common across the model's production run. Earlier models (2014–2018) and later post-facelift variants (2019 onwards) may have minor differences in antenna configuration, which the parts-check team confirms during your booking.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2024 | £854 — £854 | 1 variant | Price my 2024 |
| 2023 | £854 — £854 | 1 variant | Price my 2023 |
| 2022 | £854 — £854 | 1 variant | Price my 2022 |
| 2021 | £854 — £854 | 1 variant | Price my 2021 |
| 2020 | £854 — £854 | 1 variant | Price my 2020 |
| 2019 | £854 — £854 | 1 variant | Price my 2019 |
| 2018 | £854 — £854 | 1 variant | Price my 2018 |
| 2017 | £854 — £854 | 1 variant | Price my 2017 |
| 2016 | £854 — £854 | 1 variant | Price my 2016 |
| 2015 | £854 — £854 | 1 variant | Price my 2015 |
| 2014 | £854 — £854 | 1 variant | Price my 2014 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older XEs can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Rear window replacement typically follows a straightforward path from quote to collection.
Start with a quick online quote — answer a few questions about your XE's year and features, and receive an instant estimate.
Once booked, our parts-check team verifies the exact variant and antenna configuration needed for your vehicle.
You'll be matched with a specialist near you — mobile fitting at your address is the default, though workshop options are available.
On the day, your fitter removes the shattered rear window and installs the replacement glass with its pre-fitted gasket. A shattered window means shard cleanup is a significant part of the job — your fitter will remove what's accessible, but small shards can lodge in places that need deeper detailing afterwards.
We recommend a professional valet or interior clean once the fit is complete to catch any shards that settled during the job.
Your replacement comes with a two-year warranty covering workmanship and glass quality — your fitter confirms the details on the day.
From booking to collection, most rear-window jobs complete within a couple of hours — times vary depending on your location and the fitter's schedule.
Most Jaguar XE rear-window replacements can be fitted at your address via mobile technician, since the rear window doesn't carry an ADAS camera or calibration requirement. Your specialist works from a mobile van, removes the shattered glass, and installs the replacement with its pre-bonded gasket.
Workshop visits are available if you prefer — useful if weather conditions are poor or you'd rather have the work done in a controlled environment. The choice is yours at booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Dark Blue tint is factory-applied pigmentation on the rear half of many vehicles for privacy and heat reduction.
Dark Blue (or Privacy Glass) is a factory tint applied during manufacturing through a deep-dipping process. Automotive-grade pigment is bonded into the inner surface of the glass itself, creating a permanent dark blue or grey appearance. This differs from aftermarket film applied after purchase. The tint reduces heat transmission into the vehicle, improves cabin privacy, and is standard on rear door windows and rear windows on many new vehicles. It serves both aesthetic and functional purposes without affecting the glass's structural properties.
Look at your rear door windows and rear window. If they appear noticeably darker than the front windscreen and side windows, you have factory tint. You can also check your vehicle's specification sheet or ask your dealership service centre — they'll confirm whether Privacy Glass was factory-fitted to your model and year. The tint will be consistent across the glass and cannot be peeled off like a film.
Dark Blue tint is a visual characteristic only and does not affect glass replacement procedures, calibration, or fitting time. When we replace a tinted window, we source a replacement with matching factory tint to maintain the vehicle's original appearance and heat-rejection properties. Tinted glass is standard stock for most vehicles; availability is not typically a concern. The fitting process is identical to non-tinted glass.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Privacy glass is a darker tint applied to rear and side windows for passenger comfort and security.
Privacy glass is a factory-applied dark tint coating on the rear window and side windows (or a selection of them) to reduce visibility into the vehicle's interior. It serves two purposes: it helps protect passengers and cargo from the sun, and it provides visual security by obscuring the view of occupants and valuables from outside. The tint is integral to the glass itself — either applied during manufacture or as a permanent coating — and is not the same as an aftermarket film.
Look at the rear window and rear side windows from outside the vehicle. If they appear noticeably darker than the windscreen and front side windows, the car has privacy glass. Check your vehicle documentation (handbook or service history) under 'glass specifications' or 'optional equipment', or ask your dealership service centre — they can confirm which windows have the tint applied.
Privacy glass must be replaced with OEM (original equipment manufacturer) glass of the same tint specification. Aftermarket alternatives are available but may not match the original colour or darkness exactly. The replacement is a straightforward swap with no calibration implications. Availability is standard for mainstream models; lead time may be slightly longer for less common variants or older vehicles.
The Jaguar XE has been in continuous production since 2014, evolving through a single platform generation with a significant facelift around 2019. The rear window on all XE variants features an integrated antenna element woven into the heated rear-window grid, supporting radio, DAB, and TV reception.
When the rear window is damaged, the heating elements and antenna function are compromised together — replacement restores both demisting and reception in one job. The rear window typically carries a privacy tint slightly darker than the windscreen, and arrives encapsulated with its rubber gasket bonded to the glass at the factory, so your replacement comes trim-ready.
Own a different Jaguar? We've got you — every variant, every year.
The questions customers ask us most often.
