Rear window replacement for your Fiat Stilo (2002–2007) — instant quote across 6 variants in under 60 seconds, fitted by approved fitters near you.
Make
FIAT
Model
Stilo
No card required · Free to quote
Price variation across Stilo variants depends mainly on whether solar-control glass is fitted and the complexity of any integrated features like brake-light circuitry. Models with solar-control glazing carry slightly higher replacement costs than standard-tint variants.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2007 | £279 — £518 | 6 variants | Price my 2007 |
| 2006 | £279 — £518 | 6 variants | Price my 2006 |
| 2005 | £279 — £518 | 6 variants | Price my 2005 |
| 2004 | £279 — £518 | 6 variants | Price my 2004 |
| 2003 | £279 — £518 | 6 variants | Price my 2003 |
| 2002 | £279 — £292 | 3 variants | Price my 2002 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Stilos can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your Stilo rear window replacement online takes about two minutes — the process is straightforward and transparent.
Complete a quick online quote using our widget — we'll identify your exact variant and show you upfront what to expect.
Choose your appointment time and confirm your booking in under two minutes.
Our parts team checks your vehicle's specification to confirm the exact glass type — this typically happens within 24 hours.
A fitter from our network is matched to your job and confirms their arrival time.
On the day, your fitter arrives with your replacement glass, removes the shattered rear window, and fits the new one — typically taking 30–60 minutes of their time.
After fitting, we recommend a professional interior valet to remove any small glass shards that may have lodged in the boot or under trim — this isn't part of the standard service but ensures a completely clean finish.
Your replacement comes with a two-year warranty covering workmanship and glass quality.
From booking to driving away, most jobs are completed within a couple of hours — times vary based on your location and fitter availability.
Most Stilo rear window replacements happen at your home or workplace via mobile fitting — the 2002–2007 generation predates ADAS camera systems, so calibration isn't a factor.
Your fitter brings all tools and equipment needed for a quality seal on the driveway. If weather conditions are poor or your location is difficult to access, a workshop visit can be arranged instead.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
An opening pane with hinged hardware, typically on rear quarters or van sides.
An opening glass pane is a hinged or pivoting section of bodyglass designed to swing or tilt outward for ventilation or access. Commonly found on rear quarters of estates or vans, and on van side panels. Unlike fixed side windows or windscreens, opening panes are part of the vehicle's passive ventilation system and allow airflow without opening a door or window. The hinge and frame hardware are integral to the feature's function.
Check your vehicle's side and rear quarter panels for hinged glass sections that swing outward. Ask your dealer or service centre whether your model includes rear quarter vents or van-side opening panels. Your handbook will list ventilation features. Opening panes are visually distinct from sliding or rolling windows — they pivot on visible hinges rather than moving vertically or horizontally.
UKCG handles opening-pane replacement on a bespoke basis — please contact us for a quote rather than using the automated quote tool. Replacement includes the glass pane and matching hinge hardware where supplied. Fitting time is typically brief as there is no adhesive cure or calibration required. The pane is held in place by mechanical hinges and seals, so you can use the vehicle immediately after fitting.
The Fiat Stilo was produced from 2002 to 2007 across a single generation, offering practical five-door family hatchback design with a distinctive rear silhouette. Most variants feature a green-tinted rear window as part of the factory specification, with solar-control glass fitted to the majority of models to help reduce cabin heat.
Rear window replacement on Stilo models is straightforward, as this generation predates modern ADAS camera systems. The rear glass is typically toughened, which means it will shatter into small pieces if broken — cleanup is a significant part of the fitting job.
Own a different FIAT? We've got you — every variant, every year.
The questions customers ask us most often.
