FIAT Grande Punto rear window replacement — booked online.

What to expect during your FIAT Grande Punto rear window replacement

Rear-window replacement is a straightforward process handled at your chosen location — mobile at home or at a workshop.

1. 1

   Book your quote through the online widget by selecting your Grande Punto's year and trim; the parts-check team confirms the exact glass variant within minutes.

2. 2

   You'll be matched with an approved fitter in your area who stocks the right replacement glass.

3. 3

   On the fitting day, your fitter removes the shattered rear window and bonds the new one using specialist adhesive.

4. 4

   Shard cleanup is part of the job — your fitter will remove accessible broken glass, but small shards can lodge in places like under seats or trim channels. A professional interior valet afterwards is recommended for thorough detailing.

5. 5

   Your fitter will confirm the minimum drive-away time (typically a few hours, depending on the adhesive used and weather) before you leave.

6. 6

   Your replacement comes with a two-year warranty covering workmanship and glass quality.

Rear-window jobs typically take 30–60 minutes of the fitter's active time, and you're covered by our standard two-year warranty.

What features does your Grande Punto have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Heated Rear Windscreen2

  2006–2018

  Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.

  What it means

  A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.

  How to tell

  Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.

  Replacement impact

  Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.

• Dark Green1

  2006–2018

  Dark green tinted rear and side glass that's noticeably darker than the front windscreen but still see-through in daylight.

  What it means

  Dark green tint is a factory-applied colour to the rear window and side windows on some vehicles. It serves both aesthetic and functional purposes: it reduces glare and heat from sunlight, provides a degree of privacy without completely obscuring the interior, and contributes to the vehicle's overall design. Unlike privacy glass (which is much darker and difficult to see through from outside), dark green tint maintains reasonable transparency while still offering a tinted appearance.

  How to tell

  Look at your rear window and rear side windows in daylight. If they appear noticeably darker and greenish in tone compared to your front windscreen, you have dark green tint. The tint will be clearly visible when you look at the vehicle from outside, but you'll still be able to see through to the interior in normal daylight. Check your vehicle documentation or ask your dealership if you're uncertain.

  Replacement impact

  Replacement glass must match the original dark green tint specification to maintain the vehicle's appearance and light-control properties. We source OEM or OE-equivalent tinted glass to the correct colour specification. Tinted glass is available from stock for most common vehicles, though lead times may occasionally be slightly longer than untinted variants. Installation and cure procedures are identical to standard glass; tint does not affect fitting time or drive-away windows.

• Green1

  2006–2018

  Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.

  What it means

  Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.

  How to tell

  The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.

  Replacement impact

  Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.

• Solar Control1

  2006–2018

  Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.

  What it means

  Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.

  How to tell

  Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.

  Replacement impact

  Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.

• FIAT Punto From £266
• FIAT Ducato From £274
• FIAT Stilo From £281
• FIAT Fiorino From £294
• FIAT Doblo From £294
• FIAT 500 From £304
• FIAT Scudo From £305
• FIAT Panda From £306
• FIAT Idea From £324
• FIAT Bravo From £364
• FIAT 500L From £371
• FIAT Strada From £377