MH
MEHARI H.
Trustpilot2 Nov 2021
Excellent service
Excellent service
Toyota Prius windscreen replacement — booked online.
Instant quote across 12 Prius variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Prices from £380 to £1,251
4.82 / 5 ·
1,422 Trustpilot reviews
Get your quote
Under 60 secondsMake
Toyota
Model
Prius
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Toyota Prius windscreen price, by year
Price variation across Prius variants depends on generation, ADAS equipment, and glass features. Early-2000s models without cameras or rain sensors are the most straightforward; later models with Toyota Safety Sense carry calibration costs. Acoustic and green-tinted options add material cost.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £789 — £1,251 | 4 variants | Price my 2026 |
| 2025 | £789 — £1,251 | 4 variants | Price my 2025 |
| 2024 | £789 — £1,251 | 4 variants | Price my 2024 |
| 2023 | £789 — £1,251 | 4 variants | Price my 2023 |
| 2022 | £789 — £1,251 | 4 variants | Price my 2022 |
| 2021 | £789 — £1,251 | 4 variants | Price my 2021 |
| 2020 | £753 — £1,251 | 5 variants | Price my 2020 |
| 2019 | £753 — £1,251 | 5 variants | Price my 2019 |
| 2018 | £753 — £1,251 | 5 variants | Price my 2018 |
| 2017 | £753 — £1,165 | 4 variants | Price my 2017 |
| 2016 | £753 — £1,165 | 4 variants | Price my 2016 |
| 2015 | £387 — £786 | 7 variants | Price my 2015 |
| 2014 | £387 — £786 | 7 variants | Price my 2014 |
| 2013 | £387 — £786 | 7 variants | Price my 2013 |
| 2012 | £387 — £786 | 7 variants | Price my 2012 |
| 2011 | £663 — £786 | 4 variants | Price my 2011 |
| 2010 | £663 — £786 | 4 variants | Price my 2010 |
| 2009 | £380 — £786 | 5 variants | Price my 2009 |
| 2008 | £380 — £380 | 1 variant | Price my 2008 |
| 2007 | £380 — £380 | 1 variant | Price my 2007 |
| 2006 | £380 — £380 | 1 variant | Price my 2006 |
| 2005 | £380 — £380 | 1 variant | Price my 2005 |
| 2004 | £380 — £380 | 1 variant | Price my 2004 |
| 2003 | £327 — £380 | 2 variants | Price my 2003 |
| 2002 | £327 — £327 | 1 variant | Price my 2002 |
| 2001 | £327 — £327 | 1 variant | Price my 2001 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Priuss can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
What Toyota Prius owners say
Showing 1 review from verified Toyota Prius owners. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
What to expect during your Toyota Prius windscreen replacement
Booking a Prius windscreen replacement through UK Car Glass takes just a few minutes — here's the journey from quote to fitted glass.
- 1
Start with a quick online quote using our widget — identify your exact Prius variant in under a minute by answering a few simple questions about your car's features.
- 2
Once you've confirmed the price, complete your booking online in seconds with your preferred date and location (mobile fitting at your home or address, or workshop if you prefer).
- 3
We match you with an approved local fitter who will contact you to confirm timing. They'll also run a parts check to guarantee your replacement glass matches your factory specification — including any camera brackets, rain sensors, or green tint.
- 4
On fitting day, your fitter typically needs 45–90 minutes of hands-on time depending on your variant. If your Prius has a camera system requiring calibration, the fitter will complete static calibration on the day at the workshop location (no separate trip needed).
- 5
Your fitter confirms the drive-away time before leaving — this depends on the adhesive used and ambient conditions on the day.
- 6
You're covered by our two-year warranty on workmanship and glass quality from the date of replacement.
The entire process, from first quote to booking confirmed, takes under two minutes online — your fitter handles the rest.
Mobile fitting or workshop visit for your Prius?
Most Prius windscreen replacements can be fitted at your home or chosen address as a mobile service. However, if your variant includes a camera system (Toyota Safety Sense from around 2018 onwards), static calibration is required after the glass is set.
For calibration jobs, the entire appointment — replacement plus calibration — is scheduled at a workshop with target boards and diagnostic equipment. We don't split the job across two locations. Your approved fitter will confirm whether your specific variant needs calibration during the booking process.
We confirm the specific answer for your vehicle when you book.
What features does your Prius have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green12
2001–2026Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Acoustic (Noise reduction)10
2009–2026Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
What it means
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
How to tell
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Replacement impact
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Right Hand Drive Part9
2009–2026A glass variant made specifically for right-hand-drive vehicles like UK cars, with brackets and sensors positioned for the driver's side.
What it means
Right-hand-drive glass is a windscreen (or other glass panel) manufactured to the correct specification for vehicles where the steering wheel and driver controls are on the right side of the car. The key difference isn't the glass itself but the position of brackets, sensor mounting pads, and sometimes a VIN (Vehicle Identification Number) notch. These are placed on the dashboard side to align with right-hand-drive vehicle architecture. Using the correct variant ensures all safety systems, mounting points, and sensor arrays sit in the right place when the glass is fitted.
How to tell
Check your vehicle's specification sheet or service handbook — it will confirm 'RHD' (right-hand drive). Ask your dealership or service centre which windscreen variant they stock for your model. If you're unsure, provide us with your registration number when you book; we'll identify the correct part.
Replacement impact
UKCG stocks the UK-specific right-hand-drive variant, so all brackets, sensors, and mounting points align correctly during fitting. Using a left-hand-drive part on a right-hand-drive vehicle would result in misalignment of camera brackets, rain sensors, or other dashboard-mounted components. We confirm you receive the correct RHD variant before dispatch.
Vin Notch9
2009–2026A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
What it means
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
How to tell
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
Replacement impact
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
HUD - Head Up Display7
2009–2026No calibration after replacementA Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.
What it means
A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. The image typically appears to float a few feet ahead of the car. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.
How to tell
Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.
Replacement impact
Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.
Rain Sensor6
2009–2026No calibration after replacementYour wipers automatically activate when rain falls on the windscreen.
What it means
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
How to tell
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Replacement impact
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Antenna3
2016–2026An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
What it means
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
How to tell
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
Replacement impact
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Mono Camera3
2016–2026Calibration varies by vehicleA single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.
What it means
A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.
How to tell
Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.
Replacement impact
When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.
Static Camera Calibration Process3
2016–2026Static calibration requiredStatic calibration uses printed targets indoors to align your forward-facing camera after windscreen replacement.
What it means
Static camera calibration is a procedure in which a forward-facing camera system is realigned using printed target boards positioned at manufacturer-specified distances and heights in front of the vehicle. The vehicle remains stationary indoors throughout. A diagnostic tool reads the camera's view of these targets and adjusts the camera's alignment to factory specification. This ensures the camera can accurately detect road features, lane markings, pedestrians, and other objects — critical for driver-assistance systems like lane-keeping, collision warning, and adaptive cruise control to function safely and reliably.
How to tell
Check your vehicle's handbook or ask your dealer's service centre whether your car has a forward-facing camera system that requires calibration after windscreen replacement. Look for driver-assistance features like lane-keeping assist, autonomous emergency braking, or adaptive cruise control on the dashboard menu. If your vehicle manual mentions 'camera calibration' or 'static target calibration', static calibration is likely part of your windscreen replacement service.
Replacement impact
When a windscreen with an integrated or bracket-mounted camera is replaced, the camera's alignment can shift. Static calibration realigns the camera using indoor target boards, which must be performed in a workshop environment where printed targets can be positioned and secured at precise distances. This procedure is conducted after the windscreen is fitted and bonded. The workshop booking accommodates the additional time required for calibration, and we apply the no-split policy — both replacement and calibration happen at the same location on the same visit.
Bracket For Safety Features2
2016–2026Calibration varies by vehicleThe moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Encapsulation2
2016–2026Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
What it means
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
How to tell
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Replacement impact
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Sensor Heated Zone2
2016–2026Calibration varies by vehicleHeated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.
What it means
A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.
How to tell
Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.
Replacement impact
Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.
Camera1
2016–2026Calibration varies by vehicleA camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
What it means
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
How to tell
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Replacement impact
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
About the Toyota Prius
The Toyota Prius has been in continuous production since 1997, evolving through multiple generations. Early models carry straightforward laminated windscreens, whilst later generations from the mid-2010s onwards feature rain sensors, acoustic interlayers, and green-tinted glass as standard.
From around 2018 onwards, Toyota Safety Sense equipped some variants with a forward-facing camera system for lane-keeping assist and adaptive cruise control. This introduced camera brackets and sensor mounting behind the windscreen, requiring static calibration after replacement in affected models.
Most current Prius variants are fitted with green-tinted glass as factory standard — this subtle tint is nearly invisible but must be matched on replacement to maintain the factory specification.
Other Toyota models
Own a different Toyota? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.