Steve W.
Land Cruiser ownerTrustpilot18 Jun 2021
Toyota Land Cruiser
Extremely efficient
Extremely efficient. Glass fitted in 10 minutes, Excellent service thanks
Instant quote across 29 Land Cruiser variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Toyota
Model
Land Cruiser
No card required · Free to quote
Pricing varies significantly across the 29 variants in our catalogue, primarily driven by generation and ADAS uptake. Older Land Cruisers without camera systems are the most affordable to replace. Later models with Toyota Safety Sense require static camera calibration after the glass is fitted, which increases technician time and is typically completed at a workshop rather than on your driveway.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £295 — £926 | 3 variants | Price my 2026 |
| 2025 | £295 — £926 | 3 variants | Price my 2025 |
| 2024 | £295 — £926 | 3 variants | Price my 2024 |
| 2023 | £295 — £926 | 3 variants | Price my 2023 |
| 2022 | £295 — £926 | 3 variants | Price my 2022 |
| 2021 | £295 — £926 | 4 variants | Price my 2021 |
| 2020 | £295 — £926 | 4 variants | Price my 2020 |
| 2019 | £295 — £926 | 4 variants | Price my 2019 |
| 2018 | £295 — £926 | 5 variants | Price my 2018 |
| 2017 | £295 — £926 | 5 variants | Price my 2017 |
| 2016 | £295 — £926 | 5 variants | Price my 2016 |
| 2015 | £295 — £926 | 5 variants | Price my 2015 |
| 2014 | £295 — £926 | 5 variants | Price my 2014 |
| 2013 | £295 — £564 | 3 variants | Price my 2013 |
| 2012 | £295 — £484 | 2 variants | Price my 2012 |
| 2011 | £295 — £484 | 2 variants | Price my 2011 |
| 2010 | £295 — £484 | 2 variants | Price my 2010 |
| 2009 | £295 — £484 | 3 variants | Price my 2009 |
| 2008 | £295 — £484 | 3 variants | Price my 2008 |
| 2007 | £295 — £348 | 2 variants | Price my 2007 |
| 2006 | £295 — £348 | 2 variants | Price my 2006 |
| 2005 | £295 — £348 | 2 variants | Price my 2005 |
| 2004 | £295 — £348 | 2 variants | Price my 2004 |
| 2003 | £250 — £362 | 4 variants | Price my 2003 |
| 2002 | £250 — £362 | 3 variants | Price my 2002 |
| 2001 | £250 — £362 | 3 variants | Price my 2001 |
| 2000 | £250 — £362 | 3 variants | Price my 2000 |
| 1999 | £250 — £362 | 3 variants | Price my 1999 |
| 1998 | £250 — £362 | 5 variants | Price my 1998 |
| 1997 | £250 — £362 | 5 variants | Price my 1997 |
| 1996 | £250 — £554 | 7 variants | Price my 1996 |
| 1995 | £295 — £554 | 5 variants | Price my 1995 |
| 1994 | £295 — £554 | 5 variants | Price my 1994 |
| 1993 | £295 — £554 | 5 variants | Price my 1993 |
| 1992 | £295 — £554 | 5 variants | Price my 1992 |
| 1991 | £295 — £554 | 5 variants | Price my 1991 |
| 1990 | £295 — £554 | 5 variants | Price my 1990 |
| 1989 | £295 — £554 | 5 variants | Price my 1989 |
| 1988 | £295 — £554 | 4 variants | Price my 1988 |
| 1987 | £295 — £554 | 4 variants | Price my 1987 |
| 1986 | £295 — £554 | 4 variants | Price my 1986 |
| 1985 | £295 — £554 | 4 variants | Price my 1985 |
| 1984 | £303 — £554 | 3 variants | Price my 1984 |
| 1983 | £303 — £554 | 4 variants | Price my 1983 |
| 1982 | £303 — £554 | 3 variants | Price my 1982 |
| 1981 | £303 — £554 | 3 variants | Price my 1981 |
| 1980 | £303 — £554 | 3 variants | Price my 1980 |
| 1979 | £303 — £554 | 3 variants | Price my 1979 |
| 1978 | £303 — £554 | 3 variants | Price my 1978 |
| 1977 | £303 — £554 | 3 variants | Price my 1977 |
| 1976 | £303 — £554 | 3 variants | Price my 1976 |
| 1975 | £303 — £554 | 4 variants | Price my 1975 |
| 1974 | £303 — £554 | 3 variants | Price my 1974 |
| 1973 | £303 — £554 | 3 variants | Price my 1973 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Toyota Land Cruiser models can still be booked.
Showing 1 review from verified Toyota Land Cruiser owners. Across the whole of UK Car Glass, 4.82/5 from 1,499 Trustpilot reviews.
Booking your Land Cruiser windscreen replacement through UK Car Glass is straightforward and takes about two minutes start to finish.
Use our online widget to answer a short series of questions about your Land Cruiser — make, model, year, and key features. Your exact variant is identified in about 60 seconds.
Receive an instant quote and choose your preferred fitting date and location (mobile at your address or at a workshop, if calibration is needed).
You're matched with an approved fitter in your area who carries out a final parts check before the job to confirm the glass specification.
On fitting day, the technician removes your windscreen, prepares the frame, and bonds the new glass with polyurethane adhesive. If your Land Cruiser has a forward-facing camera, static calibration is completed before you drive away.
Your fitter confirms the minimum drive-away time (typically a few hours, depending on the adhesive used and ambient temperature) before releasing the vehicle.
You're covered by a two-year warranty on workmanship and glass quality from the date of replacement.
The entire process is managed by UKCG; you book once, the fitter handles the rest.
Most Land Cruiser windscreen replacements can be fitted at your home or workplace using mobile service. However, if your Land Cruiser is fitted with Toyota Safety Sense (the forward-facing camera system), static camera calibration is required after the glass is set. This calibration uses target boards and is typically completed at a workshop in a controlled environment.
When calibration is needed, your entire job — replacement and calibration together — is scheduled at the workshop location, not split across two visits. The fitter confirms the drive-away time before you leave, and calibration doesn't extend the time before you can drive away because it runs in parallel with adhesive cure.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the Toyota Land Cruiser: fitted on 5 of the 15 windscreen variants we list (33%); model years 2003–2026.
A subtle greenish tint in the glass, hard to see but present on the vast majority of windscreens. Your replacement must match this tint exactly.
Confirmed during the quote process — look carefully at your existing windscreen in bright light, as the tint is barely visible. Your Land Cruiser's year and trim determines whether it carries green tint.
On the Toyota Land Cruiser: fitted on 4 of the 15 windscreen variants we list (27%); model years 1973–1998.
Blue-tinted windscreens reduce glare and heat while maintaining a subtle, modern appearance.
A blue tint is a light coloration applied to the windscreen glass, usually during manufacture. It reduces solar heat transmission and glare from sunlight, particularly on bright days or when driving into the sun. The tint is integral to the glass itself — not a separate film — and is chosen by the vehicle manufacturer to balance comfort, visibility, and aesthetic consistency with the vehicle's side windows and rear window. Most vehicles come with a green or blue tint as standard; the choice depends on the manufacturer's design and regional climate considerations.
Check your side windows by rolling one halfway down and holding a white piece of paper behind the glass. If you see a blue tint reflected in the glass, your windscreen will have the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen tint specification. The tint is visible when comparing the windscreen to clear glass, though it may be subtle and harder to spot on overcast days.
Blue-tinted replacement windscreens must match the original tint to maintain visual consistency with your side and rear windows. Most replacement glass is available in the correct tint through OE (original equipment) suppliers. There is no calibration requirement related to tint. The tint does not affect fitting time, cure time, or drive-away schedules. Ensure the replacement windscreen is specified with the blue tint to avoid a mismatched appearance.
On the Toyota Land Cruiser: fitted on 4 of the 15 windscreen variants we list (27%); model years 1996–2026.
A green-tinted gradient band running across the top of the windscreen, reducing glare from above. Sun strips are built into the laminate and cannot be applied afterwards — the replacement must be the sun-strip variant.
Visible as a darker green band at the very top of the windscreen on many Land Cruiser variants. Confirmed during the quote and parts check.
On the Toyota Land Cruiser: fitted on 3 of the 15 windscreen variants we list (20%); model years 2013–2026.
A special laminate that dampens road and wind noise, improving cabin comfort. Look for the word 'Acoustic' or 'SoundScreen' printed in one of the corners, or a small ear symbol.
Typically fitted to higher-trim Land Cruiser models. Confirmed at the parts check — if your original has acoustic glass, the replacement will too.
On the Toyota Land Cruiser: fitted on 3 of the 15 windscreen variants we list (20%); model years 1983–2018.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
On the Toyota Land Cruiser: fitted on 3 of the 15 windscreen variants we list (20%); model years 1973–2026; calibration varies by vehicle.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
We confirm the exact procedure for your specific vehicle when you book.
On the Toyota Land Cruiser: fitted on 3 of the 15 windscreen variants we list (20%); model years 2003–2026.
A small printed box along the bottom edge of the windscreen displaying the vehicle's VIN (chassis number). The replacement must carry the matching VIN notch in the same position.
Found on many Land Cruiser models from the 1990s onwards. If your windscreen has a VIN box, the replacement will too — confirmed at the parts check.
On the Toyota Land Cruiser: fitted on 2 of the 15 windscreen variants we list (13%); model years 2014–2026.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
On the Toyota Land Cruiser: fitted on 2 of the 15 windscreen variants we list (13%); model years 2013–2026.
A fine mesh of heating wires laminated into the glass, allowing the windscreen to warm up and melt frost or ice quickly. Controlled via a dashboard switch.
Found on select Land Cruiser variants, often paired with heated wiper rest areas. Confirmed at the parts check if your model includes it.
On the Toyota Land Cruiser: fitted on 2 of the 15 windscreen variants we list (13%); model years 1996–2003.
A factory light-green tint found on some Japanese vehicles, distinct from standard European green and stocked separately.
Light green is a tint applied to the windscreen during manufacturing on certain Japanese-market vehicles. It differs subtly in colour and hue from the standard green tint used on European vehicles. This tint serves the same purpose as any factory tint — reducing glare, heat ingress, and UV exposure — but represents a distinct regional specification. Because the colour match must be precise, UKCG stocks and supplies light-green windscreens as a separate variant. Using a standard green tint on a vehicle that left the factory with light green will result in a visible colour mismatch.
Check your vehicle's original windscreen or consult your handbook or dealership service records. If your car is a Japanese make and the windscreen has a noticeably light greenish tint (rather than the standard neutral or slightly amber European green), you have a light-green windscreen. The tint is visible when you look through the glass at an angle or compare it side-by-side with a standard-green vehicle.
Light-green windscreen replacement requires an exact colour match to maintain consistency with the rest of the vehicle's glazing and exterior appearance. Standard green tints are not interchangeable. UKCG sources the correct light-green variant to your specific vehicle, ensuring seamless integration. No calibration is required — tint is a cosmetic and thermal property of the glass itself and does not affect safety systems or sensors.
On the Toyota Land Cruiser: fitted on 2 of the 15 windscreen variants we list (13%); model years 2013–2026; no calibration after replacement.
An optical sensor embedded in the top area of the windscreen that automatically triggers your wipers when it detects rainfall, without you operating the stalk.
Present on many Land Cruiser models from the 2000s onwards, particularly higher trims and modern variants. Confirmed during the quote.
On the Toyota Land Cruiser: fitted on 2 of the 15 windscreen variants we list (13%); model years 2013–2026.
A special infrared-absorbing coating that reduces the sun's heat transmission through the windscreen, keeping the cabin cooler in warm weather.
Fitted to some premium Land Cruiser variants. Confirmed during the quote process — your replacement will carry the same coating if your original has it.
On the Toyota Land Cruiser: fitted on 1 of the 15 windscreen variants we list (7%); model years 1973–1996.
Bronze tint reduces glare and heat whilst maintaining a warm aesthetic that complements most vehicle interiors.
Bronze tint is a coloured coating applied to the windscreen during manufacture to reduce solar heat transmission and glare from sunlight. It's one of several standard tint options (alongside green, grey, and blue) offered by most vehicle makers. The tint doesn't impair visibility but gives the glass a warm, brownish appearance when viewed from outside. Most modern vehicles have some form of windscreen tint as standard—it's rarely a clear, untinted windscreen.
Roll down a side window halfway and hold a white piece of paper behind the glass from outside. If you see a bronze or warm-brown tint in the side window, your windscreen carries the same tint. Alternatively, ask your vehicle's dealer or service centre for the original windscreen specification—they can confirm the tint colour code. Most documentation refers to it as 'bronze' or occasionally 'warm bronze'.
When replacing a windscreen with bronze tint, the replacement glass must match the original tint specification exactly. Fitting an untinted or differently tinted windscreen will create a noticeable colour mismatch with the side windows and alter the vehicle's interior light and thermal characteristics. We confirm the exact tint code from your vehicle's records and source an OE-equivalent or OEM glass to preserve the original appearance and performance.
On the Toyota Land Cruiser: fitted on 1 of the 15 windscreen variants we list (7%); model years 1973–1996.
A bronze-tinted gradient band at the top filters strong overhead glare while maintaining visibility.
A bronze sun strip is a factory-applied tinted gradient band integrated into the windscreen's laminate at the top edge. It progressively darkens from clear to bronze, reducing glare from the sun and bright reflections above the driver's sightline. The strip is built into the laminate layer during manufacture, making it a permanent part of the glass rather than a surface coating. This feature is unique to windscreens — tempered side and rear windows cannot carry laminated components.
Look at the top edge of your windscreen from the outside. If present, you'll see a graduated bronze or amber tint band that sits above the driver and passenger sightlines and fades downward into the clear glass. It's most obvious when sunlight is strong. Check your vehicle's specification sheet or ask your dealer if you're uncertain — sun strips are listed as a factory option or standard feature depending on model and trim.
A replacement windscreen with an identical sun strip must be sourced to match the original specification. Sun strips are built into the PVB laminate and cannot be added or modified after manufacture. The glass is ordered as a distinct part number from a plain windscreen. Installation and cure follow standard windscreen procedures. No additional calibration is required for the sun strip itself, though any ADAS cameras mounted on the windscreen may require calibration depending on your vehicle.
The Toyota Land Cruiser has been in continuous production since 1973, evolving through multiple generations from the original FJ40 to today's modern J300 platform. Earlier models carry straightforward laminated windscreens, while later variants from the 2000s onwards feature rain sensors, acoustic interlayers, and solar-control glass to enhance comfort and safety.
From around 2015–2016, Toyota Safety Sense (the brand's ADAS suite) began appearing on select models, bringing forward-facing cameras and their associated windscreen brackets and calibration requirements. Modern Land Cruisers often feature heated windscreens, encapsulated trim (rubber gasket pre-bonded to the glass), and specialised tints including green and blue variants with matching sun strips.
Own a different Toyota? We've got you — every variant, every year.
The questions customers ask us most often.
You don't need to know. Our online widget asks a few quick questions — make, model, year, and a couple of feature details — to narrow the variant down. Once booked, our parts check team verifies the exact specification against your VIN before the job is dispatched.
Almost always, yes, where a forward-facing camera is fitted. The technicians in our network include ADAS-calibration-certified specialists — we confirm whether your job needs a workshop or can complete on your driveway when we book.
Your replacement glass matches your original factory specification — same size, features and trim fitment as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.
OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.
Most windscreen replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — for example, windscreens with ADAS cameras needing static calibration, or where access to power, shelter, or controlled conditions makes the work safer indoors. We let you know when we confirm your booking.
Most windscreen replacements take 45–90 minutes of the technician's time. ADAS calibration extends the technician's time on the job, but cure time runs in parallel — so it doesn't usually delay when you can drive. Your technician will confirm exact timings on the day.
Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.
Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.
Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.
Many modern Land Cruisers from around 2015–2016 onwards carry Toyota Safety Sense, which includes a mono camera for pre-collision warning and adaptive cruise control. If your model has this, the windscreen bracket and camera require static calibration after the glass is fitted — completed at a workshop.
The quiz and parts check will confirm whether your variant has ADAS. If it does, your fitter will schedule the entire job (replacement + calibration) at a workshop location.
Yes. The vast majority of Land Cruiser windscreens carry a subtle green or blue tint. Your replacement glass must match the exact tint of your original — confirmed at the parts check.
If your windscreen also has a sun strip (a darker gradient band at the top), the replacement must be the sun-strip variant. A plain windscreen will not show the band and is the wrong part.
Older Land Cruisers (1970s–1990s) typically have simpler laminated windscreens with basic tinting. From the 2000s onwards, rain sensors, acoustic glass, and heated windscreens became increasingly common on higher trims.
Modern Land Cruisers (2015+) often feature encapsulated trim (rubber gasket pre-bonded to the glass), solar-control coatings, and — crucially — forward-facing cameras requiring post-replacement calibration. The year and trim of your model determines which features you need.
The fitter's active work typically takes 45–90 minutes for a non-ADAS windscreen, depending on the specific variant and any frame preparation needed. If your Land Cruiser has a forward-facing camera, calibration adds to the technician's time on the day — static calibration is completed after the glass is set.
Your fitter will confirm the minimum drive-away time before they leave (typically a few hours, depending on the adhesive and weather). Calibration doesn't extend drive-away time because adhesive cure runs in parallel with the calibration process.