Instant quote for your Skoda ENYAQ windscreen across all variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Skoda
Model
ENYAQ
No card required · Free to quote
Prices vary primarily with ADAS calibration complexity and the specific diagnostic equipment needed by your fitter. Camera-equipped vehicles like the ENYAQ require post-replacement calibration to verify lane-keeping and forward-collision detection are functioning correctly.
All variants carry the same core features (acoustic glass, rain sensor, encapsulated trim), so variation is driven by technician location, workshop availability, and whether the job is done mobile or in a controlled workshop environment.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2024 | £734 — £734 | 1 variant | Price my 2024 |
| 2023 | £734 — £734 | 1 variant | Price my 2023 |
| 2022 | £734 — £734 | 1 variant | Price my 2022 |
| 2021 | £734 — £734 | 1 variant | Price my 2021 |
| 2020 | £734 — £734 | 1 variant | Price my 2020 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older ENYAQs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Here's how your ENYAQ windscreen replacement unfolds from quote to back on the road.
Take the guided quote quiz on our site — it takes about a minute and covers your ENYAQ's year, trim, and any additional options. You'll get an instant price estimate.
Complete your online booking in under two minutes. Choose a convenient date and time.
Our team checks your exact glass specification against our parts suppliers — confirming the acoustic laminate, rain sensor, camera bracket, and VIN notch all match your original factory fit.
A technician from our network is matched to your location and booked in.
On fitting day, the technician removes the damaged windscreen, fits your new glass, and carries out the required ADAS camera calibration using static targets. This typically takes a couple of hours wall-clock time.
You're given a confirmed drive-away time before the fitter leaves — calibration runs in parallel with adhesive cure, so it doesn't add extra waiting.
Your replacement comes with a two-year warranty covering workmanship and glass quality, and your fitter will confirm all safety systems are reading correctly before you leave.
Because every ENYAQ variant features an integrated front camera, your replacement includes static ADAS calibration. Most ENYAQ jobs are completed mobile at your address; however, if your technician's equipment requires a workshop environment for precise camera targeting, the entire job (replacement and calibration) is scheduled at a local workshop.
Either way, the no-split rule applies — you won't be asked to visit two locations. Your technician will confirm the venue (mobile or workshop) when you're matched.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Skoda ENYAQ is a modern electric SUV launched in 2020, representing Skoda's commitment to contemporary vehicle safety and technology.
All ENYAQ windscreens feature a green-tinted laminate with integrated rain sensing, acoustic noise reduction, and a VIN notch along the bottom edge. The windscreen also houses a front-facing camera bracket for driver assistance systems.
Because every variant comes equipped with camera-based ADAS, replacement includes static calibration after the glass is fitted — this is completed on the day and doesn't extend your drive-away time.
Own a different Skoda? We've got you — every variant, every year.
The questions customers ask us most often.
