JS
janet S.
Trustpilot21 Jul 2023
wonderful service came to my home
wonderful service came to my home
Skoda CitiGo windscreen replacement — booked online.
Instant quote across five Skoda CitiGo variants from 2012 onwards, fitted by approved fitters — booked in under two minutes.
Prices from £298 to £568
4.81 / 5 ·
1,468 Trustpilot reviews
Get your quote
Under 60 secondsMake
Skoda
Model
CitiGo
No card required · Free to quote
- Instant online prices
- Vetted specialist network
- OEE glass, ADAS-certified
- 2-year workmanship warranty
Skoda CitiGo windscreen price, by year
Price variation depends mainly on whether your variant includes a front-facing camera for driver assistance — camera-equipped models require post-replacement calibration, which adds to the technician's work. Earlier CitiGo models without cameras are the most straightforward to replace, while later variants with camera brackets carry higher calibration complexity.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2020 | £298 — £568 | 5 variants | Price my 2020 |
| 2019 | £298 — £568 | 5 variants | Price my 2019 |
| 2018 | £298 — £568 | 5 variants | Price my 2018 |
| 2017 | £298 — £568 | 5 variants | Price my 2017 |
| 2016 | £298 — £568 | 5 variants | Price my 2016 |
| 2015 | £298 — £568 | 5 variants | Price my 2015 |
| 2014 | £298 — £568 | 5 variants | Price my 2014 |
| 2013 | £298 — £524 | 3 variants | Price my 2013 |
| 2012 | £298 — £524 | 3 variants | Price my 2012 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older CitiGos can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
What Skoda CitiGo owners say
Showing 2 reviews from verified Skoda CitiGo owners. Across the whole of UK Car Glass, 4.81/5 from 1,468 Trustpilot reviews.
What to expect during your Skoda CitiGo windscreen replacement
Booking your CitiGo windscreen replacement takes just a few straightforward steps.
- 1
Answer a short guided quiz (make, model, year, and key features) to identify your exact variant — takes around 60 seconds.
- 2
Receive an instant quote, then proceed to secure online checkout in under two minutes.
- 3
Our team runs a parts check to confirm the glass matches your factory specification — colour, tint, encapsulation, camera bracket, everything.
- 4
You're matched with a local specialist who handles the replacement, typically at your home or workplace (mobile fitting is the default).
- 5
On the day, the technician fits your new glass and, if your CitiGo has a camera, carries out the required static calibration before you drive away.
- 6
You receive a two-year warranty covering workmanship and glass quality.
Start your quote now and see how quickly you can arrange a replacement with a trusted local fitter.
Mobile fitting or workshop visit for your CitiGo?
Most CitiGo windscreen replacements are fitted at your home or workplace via mobile appointment. However, if your model includes a forward-facing camera for driver assistance, the technician will need a controlled workshop environment to perform the required static calibration after the glass is set.
When calibration is needed, the entire job — replacement and calibration together — takes place at a workshop so everything is handled in one visit. The fitter confirms your drive-away time on the day; calibration runs in parallel with adhesive cure, so it doesn't extend the time before you can drive away.
We confirm the specific answer for your vehicle when you book.
What features does your CitiGo have?
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green5
2012–2020Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
What it means
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
How to tell
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Replacement impact
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar Control5
2012–2020Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
What it means
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
How to tell
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Replacement impact
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Vin Notch5
2012–2020A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
What it means
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
How to tell
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
Replacement impact
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Bracket For Safety Features3
2012–2020Calibration varies by vehicleThe moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
What it means
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
How to tell
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
Replacement impact
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
Calibration mix across our Skoda variants
- 1Static
We confirm the exact procedure for your specific vehicle when you book.
Camera3
2012–2020Calibration varies by vehicleA camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
What it means
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
How to tell
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Replacement impact
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
Calibration mix across our Skoda variants
- 1Static
We confirm the exact procedure for your specific vehicle when you book.
Rain Sensor2
2014–2020No calibration after replacementYour wipers automatically activate when rain falls on the windscreen.
What it means
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
How to tell
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Replacement impact
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
LIDAR1
2012–2020Bespoke calibrationLIDAR helps your car sense its surroundings for advanced safety and driver-assistance features.
What it means
LIDAR (Light Detection and Ranging) is a sensor technology that uses laser beams to detect objects, obstacles, and road features in three dimensions. It creates a detailed map of the vehicle's surroundings in real time, enabling advanced driver-assistance systems (ADAS) such as adaptive cruise control, collision avoidance, and autonomous emergency braking. LIDAR complements camera and radar systems by providing precise distance and depth information, even in poor visibility or low-light conditions. It is increasingly fitted to modern vehicles as part of their safety and autonomous-capability infrastructure.
How to tell
Check your vehicle's handbook or contact your dealership to confirm LIDAR fitment. LIDAR sensors are typically mounted on the roof, bumpers, or within the windscreen/rear-window frame area. You may see reference to 'LIDAR', 'laser radar', or specific safety-feature names (e.g. 'adaptive cruise control', 'autonomous emergency braking') that rely on LIDAR in your documentation.
Replacement impact
If your windscreen or rear window houses or frames a LIDAR sensor, replacement requires careful handling to preserve or recalibrate the sensor post-fit. LIDAR calibration procedures vary significantly by vehicle make, model, and year—some require static alignment using specialist target equipment, others demand dynamic road-drive procedures, and some use a combination. We identify the exact calibration requirement when we look up your specific vehicle and confirm it with you before booking.
Light Sensor1
2014–2020Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
What it means
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
How to tell
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
Replacement impact
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
About the Skoda CitiGo
The Skoda CitiGo is a budget-friendly city car that's been in production since 2012, offering no-fuss urban motoring across a single generation through 2020. Every CitiGo windscreen comes with encapsulation (a pre-fitted rubber gasket bonded to the glass edges), green-tinted glass to reduce glare, and solar-control coating to absorb the sun's infrared rays — standard across all variants.
From the mid-2010s onwards, some models began incorporating driver-assistance features, including forward-facing cameras mounted behind the windscreen. These camera-equipped variants require static calibration after replacement, which is handled by the specialist you're matched with as part of the fitting appointment.
Other Skoda models
Own a different Skoda? We've got you — every variant, every year.
Frequently asked questions
The questions customers ask us most often.