Instant quote for your 2008–2016 Renault Fluence windscreen in under 60 seconds, fitted by approved fitters near you.
Make
Renault
Model
Fluence
No card required · Free to quote
Replacement costs are consistent across the Fluence range, as all variants in our catalogue share the same windscreen specification — green tint, rain sensor, solar control, and VIN notch. Variation in pricing is minimal, reflecting the straightforward nature of this single-generation model and the absence of complex ADAS calibration requirements.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2016 | £327 — £327 | 1 variant | Price my 2016 |
| 2015 | £327 — £327 | 1 variant | Price my 2015 |
| 2014 | £327 — £327 | 1 variant | Price my 2014 |
| 2013 | £327 — £327 | 1 variant | Price my 2013 |
| 2012 | £327 — £327 | 1 variant | Price my 2012 |
| 2011 | £327 — £327 | 1 variant | Price my 2011 |
| 2010 | £327 — £327 | 1 variant | Price my 2010 |
| 2009 | £327 — £327 | 1 variant | Price my 2009 |
| 2008 | £327 — £327 | 1 variant | Price my 2008 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Fluences can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Fluence windscreen replacement through UK Car Glass is straightforward and mobile-first.
Start with an instant online quote using our guided widget — answer a few quick questions about your Fluence and receive a price in under a minute.
Complete your booking online; you'll be matched with an approved fitter in your area within hours.
A parts check confirms your exact glass specification matches the factory original before the technician travels to you.
Your fitter arrives at your home or workplace with the replacement glass and completes the job in approximately 45–90 minutes of active work, depending on the vehicle condition.
You'll receive confirmation of the minimum drive-away time before the fitter leaves — this depends on the adhesive used and ambient conditions.
Your replacement is covered by a two-year warranty on workmanship and glass quality.
From booking to driving away, the entire process is coordinated by UK Car Glass and carried out by specialists on our network.
The Fluence typically receives a mobile replacement at your home or workplace — the standard service across most variants. No ADAS calibration is required on this model, so there is no workshop trigger related to camera systems or sensor alignment.
If weather conditions are poor or your location has restricted access, your fitter may suggest a workshop visit for safety and quality reasons — this is discussed at booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Renault Fluence was produced from 2008 to 2016, offering a practical family saloon across a single generation. Its windscreen incorporates a green tint (present on all variants in our catalogue) to reduce glare and UV exposure.
Rain sensors are fitted as standard, automatically triggering your wipers when precipitation is detected. Solar-control coating is also standard, absorbing infrared rays to help keep the cabin cooler in summer conditions.
All Fluence variants carry a VIN notch along the bottom of the windscreen, displaying the vehicle's chassis number. The glass is laminated throughout, bonded to the frame with polyurethane adhesive.
Own a different Renault? We've got you — every variant, every year.
The questions customers ask us most often.
