Instant quote across Mazda CX-7 variants from 2007–2012, fitted by approved fitters — booked in under two minutes.
Make
Mazda
Model
CX-7
No card required · Free to quote
Pricing varies mainly by the presence of a rain sensor and the acoustic properties of the glass. Earlier models without rain sensors are typically the most straightforward to source, whilst variants with rain-sensor capability may carry a slightly higher cost due to the additional wiring and sensor integration. Acoustic laminated glass is universal across this model range, so all replacements match this specification.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2012 | £511 — £788 | 3 variants | Price my 2012 |
| 2011 | £511 — £788 | 3 variants | Price my 2011 |
| 2010 | £511 — £788 | 3 variants | Price my 2010 |
| 2009 | £728 — £788 | 2 variants | Price my 2009 |
| 2008 | £728 — £788 | 2 variants | Price my 2008 |
| 2007 | £728 — £788 | 2 variants | Price my 2007 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older CX-7s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Mazda CX-7 windscreen replacement takes just a couple of minutes online.
Answer a short quiz to confirm your exact variant, including year and trim details.
You'll receive an instant quote covering the full cost of glass and fitting.
Select a time that suits you — mobile fitting at your address or a workshop visit.
On the day, your fitter will remove the damaged windscreen, fit the replacement matched to your factory specification, and confirm your drive-away time.
Your new windscreen is covered by a two-year warranty against manufacturing defects and workmanship issues.
Our network of independent specialists handles the fitting, so you can trust the job is done to a high standard.
The Mazda CX-7 predates the widespread use of driver-assistance cameras, so windscreen replacement does not require ADAS calibration. This means most fitting work can be completed at your address via mobile fitting — typically more convenient than a workshop visit.
Your fitter will confirm whether a mobile visit or workshop location suits your situation best when you book. Weather conditions or your local location may influence this choice, but it remains your decision at checkout.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
The Mazda CX-7 was produced between 2007 and 2012 across a single generation, establishing itself as a compact crossover with a focus on practical family use. All windscreens fitted to CX-7 models carry acoustic laminated glass as standard, reducing cabin noise and enhancing comfort on longer journeys.
Two out of three active variants in our catalogue are equipped with rain sensors, which automatically activate the wipers when moisture is detected on the windscreen. Most CX-7s also feature green-tinted windscreen glass, which is standard across the production run. This era predates the widespread adoption of driver-assistance cameras, so windscreen replacement does not require ADAS calibration.
Own a different Mazda? We've got you — every variant, every year.
The questions customers ask us most often.
