Instant quote across five Lexus CT200h variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Lexus
Model
CT200h
No card required · Free to quote
Price variation reflects generation updates and ADAS equipment. Earlier CT200h models without camera systems represent the most accessible option. Later variants with Lexus Safety System+ carry higher calibration complexity, which extends technician time and increases the final cost.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2021 | £739 — £739 | 1 variant | Price my 2021 |
| 2020 | £739 — £739 | 1 variant | Price my 2020 |
| 2019 | £739 — £739 | 1 variant | Price my 2019 |
| 2018 | £739 — £739 | 1 variant | Price my 2018 |
| 2017 | £401 — £739 | 4 variants | Price my 2017 |
| 2016 | £401 — £739 | 4 variants | Price my 2016 |
| 2015 | £401 — £739 | 4 variants | Price my 2015 |
| 2014 | £401 — £739 | 4 variants | Price my 2014 |
| 2013 | £401 — £739 | 3 variants | Price my 2013 |
| 2012 | £401 — £739 | 3 variants | Price my 2012 |
| 2011 | £401 — £739 | 3 variants | Price my 2011 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older CT200hs can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your replacement is straightforward — our guided process takes about two minutes and matches you with a local specialist.
Complete our online quote tool by selecting your model year and any visible glass features — under 60 seconds.
Proceed to checkout and choose your preferred appointment date and location (mobile at your address or local workshop).
Our parts team confirms the exact glass variant once you're booked, cross-checking against factory specifications.
A specialist near you gets assigned and contacts you to confirm the fitting time.
On the day, your fitter replaces the windscreen and, if your CT200h has camera-assisted safety systems, completes the required ADAS calibration.
Two-year warranty covers workmanship and glass quality — you're protected from the moment the job is done.
The whole process from booking to fitting typically takes just a few days.
Most CT200h windscreen replacements can be done at your address using a mobile fitting. However, if your car is equipped with Lexus Safety System+, ADAS camera calibration is required after the glass is fitted.
Some variants allow this calibration to be completed mobile, whilst others benefit from a workshop environment with a static target board. If a workshop visit is needed, your entire job — replacement and calibration together — is scheduled at one location, ensuring the safety-critical system is properly restored before you drive away.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
We confirm the exact procedure for your specific vehicle when you book.
A defogging detector automatically clears condensation from your windscreen, improving visibility in damp conditions.
A defogging detector is a sensor that monitors moisture levels on the windscreen and triggers the demister system automatically when condensation builds up. It improves driver visibility and safety in damp or cold weather by preventing manual intervention. The sensor typically sits near the rear-view mirror, positioned to sense moisture accumulation on the glass surface.
Check your vehicle's handbook or ask your dealer's service centre whether your model includes an automatic defogging or moisture-sensing demister. Look near the rear-view mirror for a small sensor unit. Some vehicles display an indicator light or message on the dashboard when the system is active.
The defogging detector does not affect windscreen replacement or require recalibration after fitting. The sensor itself remains in place and continues to function once the new windscreen is installed. No additional calibration, cure time, or specialist procedures are needed.
The Lexus CT200h has been in continuous production since 2011, offering a refined hybrid compact hatchback across a single generation through 2021. All windscreens feature encapsulation, green-tinted glass, rain sensors, and VIN notches as standard — a consistency that makes identification straightforward across all active variants.
Most models include solar-control glass to manage cabin heat, with acoustic options fitted to higher-spec variants. From the mid-2010s onwards, Lexus Safety System+ became available, introducing forward-facing cameras for lane-keeping assist and adaptive cruise control.
Camera-equipped variants require ADAS calibration after windscreen replacement, a static procedure completed by specialists on our network to restore the system's accuracy.
Own a different Lexus? We've got you — every variant, every year.
The questions customers ask us most often.
