UK Car Glass
Menu

Lexus windscreen replacement

Instant prices across 15 Lexus models in under 60 seconds, fitted by approved fitters — booked in under two minutes.

Prices from £378 to £1,312 across the range
4.82 / 5 · 1,505 Trustpilot reviews

Get your quote

Under 60 seconds

Make

Lexus

No card required · Free to quote

  • Instant online prices
  • Vetted specialist network
  • OEE glass, ADAS-certified
  • 2-year workmanship warranty

About Lexus windscreen replacement

Lexus has built its reputation on refinement and reliability across a tightly integrated range spanning the compact IS saloon through to the flagship LS and premium RX SUV family. Most models share common glass specifications within their generation, simplifying sourcing for replacements across the brand.

From the mid-2010s onwards, Lexus Safety System+ (LSS+) became the defining feature of modern Lexus windscreens. This suite — now in its 4.0 iteration — integrates a forward-facing camera mounted at the windscreen to enable lane-keeping assistance, adaptive cruise control, and collision avoidance. Acoustic windscreen glass is fitted selectively to higher-trim models, particularly on the ES300H Luxury variants and GX platform premium configurations.

Windscreen replacement on any LSS+-equipped vehicle requires static camera calibration after the glass is set. This is a documented safety requirement across all modern Lexus models, meaning virtually every current-generation vehicle your fitter encounters will need this recalibration step.

What drives Lexus windscreen prices

Replacement costs vary across the Lexus range based on which Safety System+ generation your model carries — older pre-ADAS IS, CT, and GS variants sit at the accessible end, while newer LS, RX, and ES models with LSS+ 3.0 and 4.0 suites command higher calibration fees. Acoustic glass fitment on luxury-trim vehicles also adds to the replacement cost compared to standard variants.

Calibration complexity increases slightly with each LSS+ generation as Lexus has refined sensor tolerances, but this impacts technician time rather than parts cost.

Mobile fitting or workshop visit

Lexus Safety System+ calibration is one of the strictest in the market because Lexus has adopted static calibration using a target board in a controlled environment as its standard procedure. This means most modern Lexus windscreen jobs — particularly IS, RX, ES, and LS models from the mid-2010s onward — are scheduled at a workshop rather than mobile at your home.

Older CT200H and early GS300 variants without camera systems can be fitted mobile in many cases. Your UKCG quote will confirm whether your specific variant can be done at home or needs workshop access for calibration.

Read how our windscreen replacement service works, or see Lexus rear window replacement.

What Lexus owners say

Showing 1 review from verified Lexus owners. Across the whole of UK Car Glass, 4.82/5 from 1,505 Trustpilot reviews.

HD

Hayley D.

owner

Verified on Google5 Aug 2026

2000 Lexus GS 300

The guys from southwest screens were great!

The guys from southwest screens were great! Really new there stuff. Kept us upto date on what they were doing. Will be using them again.

AE

Andrew E.

Verified on Trustpilot20 Nov 2026

2019 Dacia Logan

Screening

Excellent service from the booking to screen fitting by a very pleasant young engineer. Thank you to all involved.

MW

Matthew W.

Verified on Trustpilot19 Nov 2026

2014 Volvo V60

Top job, Quality Technicians

Great experience left in the hands of technician and completed in record time. Would highly recommend to anyone who is looking for a quick turnaround and quality job done. Definitely using again in future Thank you Ryan & Martin

PC

Pete C.

Verified on Trustpilot6 Nov 2026

2019 Dacia Duster

Excellent service from initial enquiry…

Excellent service from initial enquiry to changing the windscreen,prompt and thorough

MS

Matthew S.

Verified on Trustpilot2 Nov 2026

2017 Scania S-Series

Scania truck screen

Had a windscreen fitted to a Scania lorry, the whole process was made very easy by UK Car Glass. Great communication and great service. Very happy

DW

Dougie W.

Trustpilot28 Oct 2026

2009 Saab 9-3

Had to replace the windscreen on our 18 year old car

Had to replace the windscreen on our 18 year old car because it had become dangerous due to thousands of micro chips. The low winter sun made it impossible to see out of. Searching online found UK Car Glass. The price was reasonable and I made an online booking for 2 days later. Unfortunately due to storms a nice lady from the company phoned me and asked if we could postpone fitting for 2 days till the weather cleared which was no problem. The fitter turned up as promised and the job was done within half an hour. Overall a good experience. UK Car Glass appear to be a nationwide company who sub contract to existing windscreen fitting companies. In view of this it may be worthwhile directly contacting a local firm first to check their pricing as it's possible they may be a bit cheaper because their won't be a middleman. However, I've no complaints. Ease of booking, communication etc is excellent.

DD

David D.

Verified on Trustpilot28 Oct 2026

2018 Skoda Rapid

Fast and reliable

Fast and reliable service. I am very satisfied; I will definitely use them again if the need arises.

AT

Aleksey T.

Verified on Trustpilot25 Oct 2026

2011 Peugeot Bipper

Fast and reliable

Fast and reliable service. I am very satisfied; I will definitely use them again if the need arises.

CH

Chris H.

Verified on Trustpilot21 Oct 2026

2017 Skoda Kodiaq

More professional than autoglass

Polite, prompt and efficient. Contacted Uk Car Glass and autoglass for quotes, autoglass were suppose to call with in a window and they didn’t, by the time they contacted me the job had been done.

TB

Tanya B.

Verified on Trustpilot15 Oct 2026

2017 BMW 4 Series

Very happy with UK car glass

Very happy with UK car glass. They offered the lowest quote and an online booking service. After an initial confirmation email, I heard nothing further for a week, so I called to check that my car was still booked in for a new windscreen. I was informed that it was and they would be in touch to confirm the ETA. The team kept me informed over the weekend, the technician called and updated me again on the day, and arrived when he said he would. The screen was changed efficiently and the technician was polite and helpful. I would use the company again and recommend UK car glass to others.

RB

Raymond B.

Verified on Trustpilot9 Oct 2026

2017 Mercedes Sprinter

Things were not straight forward the…

Things were not straight forward the keys had not been left with the vehicle but the fitter used his brain and a bit of detective work together with some resolve and completed the job and did a excellent job without any assistance or making a drama!

JH

Jennifer H.

Verified on Trustpilot7 Oct 2026

2012 FIAT 500L

They were more helpful than the…

They were more helpful than the insurance company and was done on no time price was excellent booking process easy

MR

Michael R.

Google25 Sep 2026

I was worried about after market glass

I was worried about after market glass but their quality is top. No air noise after replacement...

What Lexus windscreen features mean

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

  • Green35
    1995–2026

    Across the Lexus range: fitted on every one of the 15 Lexus models we list; model years 1995–2026.

    Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.

    What it means

    Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.

    How to tell

    The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.

    Replacement impact

    Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.

  • Vin Notch32
    1995–2026

    Across the Lexus range: fitted on every one of the 15 Lexus models we list; model years 1995–2026.

    A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.

    What it means

    A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.

    How to tell

    Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.

    Replacement impact

    When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.

  • Rain Sensor30
    2000–2026No calibration after replacement

    Across the Lexus range: fitted on 14 of the 15 Lexus models we list (93%); model years 2000–2026; no calibration after replacement.

    Your wipers automatically activate when rain falls on the windscreen.

    What it means

    A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.

    How to tell

    Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.

    Replacement impact

    Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.

  • Acoustic (Noise reduction)26
    2004–2026

    Across the Lexus range: fitted on 12 of the 15 Lexus models we list (80%); model years 2004–2026.

    Acoustic glass reduces cabin noise for a quieter, more comfortable ride.

    What it means

    Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.

    How to tell

    Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.

    Replacement impact

    Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.

  • Camera12
    2011–2026Calibration varies by vehicle

    Across the Lexus range: fitted on 7 of the 15 Lexus models we list (47%); model years 2011–2026; calibration varies by vehicle.

    A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.

    What it means

    A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.

    How to tell

    Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.

    Replacement impact

    Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.

    Calibration mix across our Lexus variants

    • 7Static

    We confirm the exact procedure for your specific vehicle when you book.

  • Antenna10
    2001–2026

    Across the Lexus range: fitted on 5 of the 15 Lexus models we list (33%); model years 2001–2026.

    An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.

    What it means

    An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.

    How to tell

    Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.

    Replacement impact

    When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.

  • Solar Control10
    2004–2026

    Across the Lexus range: fitted on 4 of the 15 Lexus models we list (27%); model years 2004–2026.

    Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.

    What it means

    Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.

    How to tell

    Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.

    Replacement impact

    Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.

  • Heated Windscreen9
    2004–2026

    Across the Lexus range: fitted on 6 of the 15 Lexus models we list (40%); model years 2004–2026.

    Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.

    What it means

    A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.

    How to tell

    Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.

    Replacement impact

    Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.

  • Blue Sun Strip8
    1998–2026

    Across the Lexus range: fitted on 6 of the 15 Lexus models we list (40%); model years 1998–2026.

    A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.

    What it means

    A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.

    How to tell

    Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.

    Replacement impact

    When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.

  • Heated Wiper Rest Area5
    2003–2014

    Across the Lexus range: fitted on 3 of the 15 Lexus models we list (20%); model years 2003–2014.

    Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.

    What it means

    A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.

    How to tell

    Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.

    Replacement impact

    When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.

  • Light Sensor5
    2011–2026

    Across the Lexus range: fitted on 2 of the 15 Lexus models we list (13%); model years 2011–2026.

    Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.

    What it means

    A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.

    How to tell

    Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.

    Replacement impact

    When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.

  • HUD - Head Up Display4
    2014–2026No calibration after replacement

    Across the Lexus range: fitted on 4 of the 15 Lexus models we list (27%); model years 2014–2026; no calibration after replacement.

    A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.

    What it means

    A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.

    How to tell

    Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.

    Replacement impact

    Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.

  • Bracket For Safety Features2
    2015–2026Calibration varies by vehicle

    Across the Lexus range: fitted on 2 of the 15 Lexus models we list (13%); model years 2015–2026; calibration varies by vehicle.

    The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.

    What it means

    A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.

    How to tell

    Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.

    Replacement impact

    On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.

    Calibration mix across our Lexus variants

    • 1Static

    We confirm the exact procedure for your specific vehicle when you book.

  • Defogging Detector1
    2011–2017

    Across the Lexus range: fitted on 1 of the 15 Lexus models we list (7%); model years 2011–2017.

    A defogging detector automatically clears condensation from your windscreen, improving visibility in damp conditions.

    What it means

    A defogging detector is a sensor that monitors moisture levels on the windscreen and triggers the demister system automatically when condensation builds up. It improves driver visibility and safety in damp or cold weather by preventing manual intervention. The sensor typically sits near the rear-view mirror, positioned to sense moisture accumulation on the glass surface.

    How to tell

    Check your vehicle's handbook or ask your dealer's service centre whether your model includes an automatic defogging or moisture-sensing demister. Look near the rear-view mirror for a small sensor unit. Some vehicles display an indicator light or message on the dashboard when the system is active.

    Replacement impact

    The defogging detector does not affect windscreen replacement or require recalibration after fitting. The sensor itself remains in place and continues to function once the new windscreen is installed. No additional calibration, cure time, or specialist procedures are needed.

Frequently asked questions

The questions customers ask us most often.

Most current-generation Lexus models carry Lexus Safety System+ in some form, which requires windscreen camera recalibration after replacement. The IS, RX, ES, and LS — your volume models — all need it. Older CT200H and GS300 variants may not, depending on their specification year and trim. Your quote will confirm whether calibration applies to your car.

Lexus Safety System+ calibration requires a workshop with a target board for static alignment. If your model needs calibration (most do), the entire job — glass replacement and calibration — will be scheduled at one workshop location. UKCG doesn't split the job across locations, so your fitter coordinates the full service in one visit.

Acoustic glass is fitted selectively on higher-trim Lexus models — for example, the ES300H Luxury trim and GX platform Overtrail+ configurations — but not across all variants or generations. Standard-trim IS, CT, and RX models typically carry conventional laminated glass. Your UKCG quote will confirm whether your specific variant has acoustic fitment.

Non-ADAS replacements usually take the fitter 45–90 minutes depending on the vehicle. ADAS-equipped models take longer because static camera calibration is completed after the glass is set, but calibration runs in parallel with adhesive cure, so it doesn't extend the time before you can drive away. Your fitter will confirm the drive-away time on the day.

You don't need to know. Our online widget asks a few quick questions — make, model, year, and a couple of feature details — to narrow the variant down. Once booked, our parts check team verifies the exact specification against your VIN before the job is dispatched.

Almost always, yes, where a forward-facing camera is fitted. The technicians in our network include ADAS-calibration-certified specialists — we confirm whether your job needs a workshop or can complete on your driveway when we book.

Your replacement glass matches your original factory specification — same size, features and trim fitment as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.

OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.

Most windscreen replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — for example, windscreens with ADAS cameras needing static calibration, or where access to power, shelter, or controlled conditions makes the work safer indoors. We let you know when we confirm your booking.

Most windscreen replacements take 45–90 minutes of the technician's time. ADAS calibration extends the technician's time on the job, but cure time runs in parallel — so it doesn't usually delay when you can drive. Your technician will confirm exact timings on the day.

Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.

Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.

Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.