Lexus CT 200h windscreen replacement — booked online.

What to expect during your Lexus CT 200h windscreen replacement

Booking your replacement is straightforward — our guided process takes about two minutes and matches you with a local specialist.

1. 1

   Complete our online quote tool by selecting your model year and any visible glass features — under 60 seconds.

2. 2

   Proceed to checkout and choose your preferred appointment date and location (mobile at your address or local workshop).

3. 3

   Our parts team confirms the exact glass variant once you're booked, cross-checking against factory specifications.

4. 4

   A specialist near you gets assigned and contacts you to confirm the fitting time.

5. 5

   On the day, your fitter replaces the windscreen and, if your CT200h has camera-assisted safety systems, completes the required ADAS calibration.

6. 6

   Two-year warranty covers workmanship and glass quality — you're protected from the moment the job is done.

The whole process from booking to fitting typically takes just a few days.

What features does your CT 200h have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Green4

  2011–2021

  On the Lexus CT 200h: fitted on every one of the 4 windscreen variants we list; model years 2011–2021.

  What it means

  A subtle green tint in the glass that's barely visible but filters heat and UV light.

  On your Lexus CT 200h

  Standard on every CT200h windscreen; look carefully at the tinted strip along the bottom edge.

• Rain Sensor4

  2011–2021No calibration after replacement

  On the Lexus CT 200h: fitted on every one of the 4 windscreen variants we list; model years 2011–2021; no calibration after replacement.

  What it means

  An optical sensor embedded in the glass that triggers your wipers automatically when it detects rain.

  On your Lexus CT 200h

  All CT200h models include this feature — your replacement will preserve it.

• Vin Notch4

  2011–2021

  On the Lexus CT 200h: fitted on every one of the 4 windscreen variants we list; model years 2011–2021.

  A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.

  What it means

  A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.

  How to tell

  Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.

  Replacement impact

  When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.

• Acoustic (Noise reduction)3

  2011–2021

  On the Lexus CT 200h: fitted on 3 of the 4 windscreen variants we list (75%); model years 2011–2021.

  What it means

  A specialised laminate that dampens road and engine noise, creating a quieter cabin.

  On your Lexus CT 200h

  Found on higher-specification trims — look for 'Acoustic' printed in a corner or a speaker-icon marking on the glass.

• Antenna3

  2011–2021

  On the Lexus CT 200h: fitted on 3 of the 4 windscreen variants we list (75%); model years 2011–2021.

  An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.

  What it means

  An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.

  How to tell

  Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.

  Replacement impact

  When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.

• Light Sensor3

  2011–2021

  On the Lexus CT 200h: fitted on 3 of the 4 windscreen variants we list (75%); model years 2011–2021.

  Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.

  What it means

  A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.

  How to tell

  Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.

  Replacement impact

  When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.

• Solar Control3

  2011–2017

  On the Lexus CT 200h: fitted on 3 of the 4 windscreen variants we list (75%); model years 2011–2017.

  What it means

  Infrared-reflective coating in the glass that absorbs the sun's heat, reducing cabin temperature and air-con load.

  On your Lexus CT 200h

  Fitted to most CT200h variants; confirmed at the parts-check stage if your model has it.

• Camera1

  2011–2021Calibration varies by vehicle

  On the Lexus CT 200h: fitted on 1 of the 4 windscreen variants we list (25%); model years 2011–2021; calibration varies by vehicle.

  What it means

  A forward-facing camera mounted behind the windscreen, part of Lexus Safety System+ for lane-keeping and adaptive cruise.

  On your Lexus CT 200h

  Visible as one or two triangular shapes in the black field near the rear-view mirror if your CT200h has ADAS; requires calibration after replacement.

  Calibration mix across our Lexus variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Defogging Detector1

  2011–2017

  On the Lexus CT 200h: fitted on 1 of the 4 windscreen variants we list (25%); model years 2011–2017.

  A defogging detector automatically clears condensation from your windscreen, improving visibility in damp conditions.

  What it means

  A defogging detector is a sensor that monitors moisture levels on the windscreen and triggers the demister system automatically when condensation builds up. It improves driver visibility and safety in damp or cold weather by preventing manual intervention. The sensor typically sits near the rear-view mirror, positioned to sense moisture accumulation on the glass surface.

  How to tell

  Check your vehicle's handbook or ask your dealer's service centre whether your model includes an automatic defogging or moisture-sensing demister. Look near the rear-view mirror for a small sensor unit. Some vehicles display an indicator light or message on the dashboard when the system is active.

  Replacement impact

  The defogging detector does not affect windscreen replacement or require recalibration after fitting. The sensor itself remains in place and continues to function once the new windscreen is installed. No additional calibration, cure time, or specialist procedures are needed.

• Lexus LS 430 From £378
• Lexus LS 400 From £381
• Lexus GS 300 From £387
• Lexus RX 300 From £420
• Lexus RX 350 From £423
• Lexus IS From £449
• Lexus RX 400 From £452
• Lexus RX 450h From £523
• Lexus SC 430 From £543
• Lexus LS 460 From £583
• Lexus RC From £742
• Lexus RX From £756