Bruce H.
Range Rover Velar ownerTrustpilot20 Sep 2025
Land Rover Range Rover Velar
Absolutely terrific from beginning to…
Absolutely terrific from beginning to end
Instant quote across 12 Range Rover Velar variants in under 60 seconds, fitted by approved fitters near you — booked in under two minutes.
Make
Land Rover
Model
Range Rover Velar
No card required · Free to quote
Prices vary with model year and ADAS equipment fitted. Earlier variants carry the mono camera system with static calibration capability, whilst later models may include additional sensor hardware requiring more involved recalibration methods. Heated windscreen, solar-control tinting, and encapsulated-edge construction also influence final cost. Specialist fitters on our network will confirm the exact specification during your parts check.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £873 — £1,227 | 3 variants | Price my 2026 |
| 2025 | £873 — £1,227 | 3 variants | Price my 2025 |
| 2024 | £873 — £1,227 | 3 variants | Price my 2024 |
| 2023 | £969 — £1,227 | 2 variants | Price my 2023 |
| 2022 | £969 — £1,227 | 2 variants | Price my 2022 |
| 2021 | £969 — £1,235 | 3 variants | Price my 2021 |
| 2020 | £702 — £1,235 | 3 variants | Price my 2020 |
| 2019 | £702 — £1,235 | 3 variants | Price my 2019 |
| 2018 | £702 — £1,235 | 3 variants | Price my 2018 |
| 2017 | £702 — £1,235 | 3 variants | Price my 2017 |
| 2016 | £702 — £1,235 | 3 variants | Price my 2016 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Land Rover Range Rover Velar models can still be booked.
Showing 1 review from verified Land Rover Range Rover Velar owners. Across the whole of UK Car Glass, 4.82/5 from 1,500 Trustpilot reviews.
Booking your Range Rover Velar windscreen replacement online takes just a few minutes, and we handle the rest.
Answer a quick guided quiz about your Velar's trim, year, and features — the widget identifies your exact variant in under 60 seconds.
Get an instant quote, add any optional coverage, and book your preferred appointment (mobile at home or workshop visit).
We match you with an approved technician in your area and send you confirmation and pre-fit details.
The technician arrives with your replacement glass, checks the parts against your vehicle, and completes the fit.
If camera calibration is required — which is common on Velar models — static or dynamic recalibration is performed to restore Lane Keep and Forward Collision Warning functionality.
Your fitter confirms the drive-away time before leaving, and you're covered by our two-year warranty on workmanship and glass quality.
From quote to booked appointment, most customers complete the process in under two minutes.
Most Range Rover Velar windscreen replacements can be completed at your home or workplace — the technician brings everything needed and fits the glass mobile.
However, because every Velar carries the InControl camera system, static calibration is required after fitting to restore Lane Keep Assist and Forward Collision Warning functionality. Many technicians in our network can perform this mobile using portable diagnostic equipment. If your fitter's kit doesn't support mobile calibration, the full job — replacement plus calibration — is scheduled at their workshop to keep you and the vehicle safe.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
On the Land Rover Range Rover Velar: fitted on every one of the 6 windscreen variants we list; model years 2016–2026.
Laminated glass with a specialised interlayer that absorbs sound energy, reducing road and wind noise in the cabin.
Fitted as standard on every Velar variant — a key part of the premium specification. Look for the word 'Acoustic' or 'SoundScreen' on the glass edge or your paperwork.
On the Land Rover Range Rover Velar: fitted on every one of the 6 windscreen variants we list; model years 2016–2026; calibration varies by vehicle.
A forward-facing mono camera mounted at the windscreen supporting Lane Departure Warning, Lane Keep Assist, and Forward Collision Warning via the InControl ADAS suite.
Present on all Range Rover Velar models from 2016 onwards. You will notice a triangular shape in the black field near the rear-view mirror if you look carefully.
On the Land Rover Range Rover Velar: fitted on every one of the 6 windscreen variants we list; model years 2016–2026.
A subtle green tint in the laminated glass that reduces glare and heat whilst remaining nearly imperceptible to the eye.
Fitted on the majority of Velar variants. The tint is difficult to spot — your replacement glass will match your original during the parts check.
On the Land Rover Range Rover Velar: fitted on every one of the 6 windscreen variants we list; model years 2016–2026.
An integrated mesh of thin wires embedded in the glass that heats up to clear frost, ice, and condensation in winter.
Fitted on approximately two-thirds of Velar models, typically on higher trim levels or as a premium option. Check your vehicle's feature list or we will confirm during the quote.
On the Land Rover Range Rover Velar: fitted on every one of the 6 windscreen variants we list; model years 2016–2026; no calibration after replacement.
An optical sensor that automatically activates the windscreen wipers when rain is detected, without manual input.
Standard across the Velar range. You will notice your wipers activating automatically when driving in rain without touching the wiper stalk.
On the Land Rover Range Rover Velar: fitted on every one of the 6 windscreen variants we list; model years 2016–2026.
A small box at the bottom of the windscreen displaying the vehicle's VIN (chassis number) for identification purposes.
Present on all Velar models. You can see a small rectangular area at the base of the windscreen if you look down.
On the Land Rover Range Rover Velar: fitted on 4 of the 6 windscreen variants we list (67%); model years 2016–2026; calibration varies by vehicle.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
On the Land Rover Range Rover Velar: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2020.
Heat-absorbing PVB interlayer reduces solar gain and cabin temperature on warm days—but must match your original spec.
Heat-absorbing PVB is a specially formulated interlayer sandwiched between the glass plies in your windscreen. It absorbs a portion of the sun's infrared radiation before it enters the cabin, reducing solar heat gain on warm days. This keeps the interior cooler and reduces air-conditioning workload. The feature is built into the glass during manufacture and cannot be added or removed after production. If your vehicle left the factory with this interlayer, any replacement windscreen must carry the same PVB specification to maintain the original thermal performance.
Check your vehicle's specification sheet or handbook—heat-absorbing PVB is listed under windscreen or glass specification. You can also ask your dealership service centre or provide us with your vehicle registration; we'll confirm whether your car came with this feature as standard or as an option.
Replacement windscreens with heat-absorbing PVB must be sourced to the exact OE specification—aftermarket alternatives with standard PVB will not deliver the same solar-control performance. We ensure the correct spec is ordered before the fit. No calibration is required. Installation and cure procedures are identical to standard windscreen replacement; the interlayer is integral to the glass and requires no additional treatment.
On the Land Rover Range Rover Velar: fitted on 1 of the 6 windscreen variants we list (17%); model years 2016–2021; no calibration after replacement.
A display system that projects the speedometer, navigation directions, and driver alerts onto the windscreen so you can see them without looking away from the road.
Available on selected Velar trims. If your windscreen has HUD, you will see the information projected onto the glass at eye level when the system is active.
The Range Rover Velar arrived in 2016 as Land Rover's mid-size luxury SUV, bridging the gap between the Evoque and full-size Range Rover. Every model year carries an acoustic laminated windscreen as standard, which reduces cabin noise on the motorway and is a hallmark of premium Land Rover specification.
From launch, the Velar was equipped with the InControl driver assistance suite, featuring a forward-facing mono camera mounted behind the windscreen. This camera powers Lane Departure Warning, Lane Keep Assist, and Forward Collision Warning — safety features that require professional recalibration after windscreen replacement.
Most variants also feature rain sensors for automatic wipers, a VIN notch at the base of the glass, and encapsulated edges where the rubber trim is factory-bonded to the glass itself. Solar-control and heated-windscreen options appear on higher trim levels, making glass specification vary significantly across the range.
Own a different Land Rover? We've got you — every variant, every year.
The questions customers ask us most often.
You don't need to know. Our online widget asks a few quick questions — make, model, year, and a couple of feature details — to narrow the variant down. Once booked, our parts check team verifies the exact specification against your VIN before the job is dispatched.
Almost always, yes, where a forward-facing camera is fitted. The technicians in our network include ADAS-calibration-certified specialists — we confirm whether your job needs a workshop or can complete on your driveway when we book.
Your replacement glass matches your original factory specification — same size, features and trim fitment as the glass the car left the factory with. It's UK-approved for the road and typically supplied by tier-1 manufacturers like Pilkington, Saint-Gobain, and AGC.
OEM-branded glass (with the vehicle-maker logo) is available on request at a higher price.
Most windscreen replacements happen at your chosen location — home, office, or car park. Some jobs are better suited to a workshop — for example, windscreens with ADAS cameras needing static calibration, or where access to power, shelter, or controlled conditions makes the work safer indoors. We let you know when we confirm your booking.
Most windscreen replacements take 45–90 minutes of the technician's time. ADAS calibration extends the technician's time on the job, but cure time runs in parallel — so it doesn't usually delay when you can drive. Your technician will confirm exact timings on the day.
Most UK comprehensive policies include glass cover, typically with an excess of £75–£100. If your insurer is on our approved list, the specialist you're matched with bills them directly and you just pay the excess.
Otherwise you can pay UK Car Glass directly and claim back from your insurer — our all-inclusive price is often lower than the excess anyway, so paying direct can work out cheaper.
Two years on workmanship defects — water leaks, wind noise, bonding failures — from the date of replacement. If the specialist's work isn't right, we arrange to put it right under the warranty process.
The InControl mono camera behind your windscreen detects lane markings, road signs, and other vehicles to power your safety features. When the windscreen is removed and refitted, the camera's angle and distance from the road change slightly — enough to cause missed warnings or delayed braking alerts. Recalibration resets the camera's perception so it can safely protect you again.
Your fitter will run diagnostic scans before and after to confirm the job is complete. This is a safety-critical step, not optional.
Yes. Velar windscreens are all acoustic laminated glass, which means they have a thicker interlayer designed to absorb sound energy. This makes the cabin noticeably quieter at motorway speeds compared to basic laminated glass. Your replacement must carry the same acoustic specification — it cannot be retro-fitted, so matching your original factory spec is essential.
Yes. Your replacement is matched to your factory specification during the parts check, which means it will carry the same camera mounting points, rain sensor, heated element (if fitted), tint colour, acoustic properties, and any other features your original had. We verify this before the technician arrives, so there are no surprises on the day.
Both are available — mobile fitting at your address is the default, but you can always request a workshop visit during booking. Some customers prefer workshop visits for convenience (no need to free up space at home) or if they want to combine the windscreen replacement with other vehicle servicing. Either way, if camera calibration is required, it is completed as part of the same appointment.