Instant quote across 28 Land Rover Discovery variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Land Rover
Model
Discovery
No card required · Free to quote
Price variation reflects generation, ADAS presence, and glass specification. Earlier non-camera Discovery models without acoustic or solar features are the most affordable; mid-range variants with rain sensors and acoustic glass cost more; later models with InControl cameras and full safety suites require calibration and carry the highest cost.
Solar-control and heated windscreen options on premium trims also influence pricing. Encapsulated glass (with trim pre-bonded at the factory) is typically pricier than non-encapsulated variants.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £727 — £1,910 | 10 variants | Price my 2026 |
| 2025 | £727 — £1,910 | 10 variants | Price my 2025 |
| 2024 | £727 — £1,910 | 10 variants | Price my 2024 |
| 2023 | £727 — £1,486 | 9 variants | Price my 2023 |
| 2022 | £727 — £1,486 | 9 variants | Price my 2022 |
| 2021 | £727 — £1,486 | 9 variants | Price my 2021 |
| 2020 | £727 — £1,486 | 7 variants | Price my 2020 |
| 2019 | £727 — £1,486 | 7 variants | Price my 2019 |
| 2018 | £727 — £1,486 | 7 variants | Price my 2018 |
| 2017 | £727 — £1,486 | 7 variants | Price my 2017 |
| 2013 | £605 — £931 | 5 variants | Price my 2013 |
| 2012 | £605 — £931 | 5 variants | Price my 2012 |
| 2011 | £541 — £931 | 9 variants | Price my 2011 |
| 2010 | £541 — £931 | 9 variants | Price my 2010 |
| 2009 | £541 — £931 | 11 variants | Price my 2009 |
| 2008 | £541 — £931 | 9 variants | Price my 2008 |
| 2007 | £541 — £931 | 9 variants | Price my 2007 |
| 2006 | £541 — £931 | 9 variants | Price my 2006 |
| 2005 | £541 — £931 | 9 variants | Price my 2005 |
| 2004 | £420 — £931 | 11 variants | Price my 2004 |
| 2003 | £420 — £603 | 2 variants | Price my 2003 |
| 2002 | £420 — £603 | 2 variants | Price my 2002 |
| 2001 | £420 — £603 | 2 variants | Price my 2001 |
| 2000 | £420 — £603 | 2 variants | Price my 2000 |
| 1999 | £420 — £603 | 2 variants | Price my 1999 |
| 1998 | £420 — £759 | 3 variants | Price my 1998 |
| 1997 | £614 — £759 | 2 variants | Price my 1997 |
| 1996 | £614 — £759 | 2 variants | Price my 1996 |
| 1995 | £583 — £759 | 3 variants | Price my 1995 |
| 1994 | £583 — £759 | 3 variants | Price my 1994 |
| 1993 | £584 — £584 | 1 variant | Price my 1993 |
| 1992 | £584 — £584 | 1 variant | Price my 1992 |
| 1991 | £584 — £584 | 1 variant | Price my 1991 |
| 1990 | £448 — £584 | 2 variants | Price my 1990 |
| 1989 | £448 — £584 | 2 variants | Price my 1989 |
| 1988 | £448 — £448 | 1 variant | Price my 1988 |
| 1987 | £448 — £448 | 1 variant | Price my 1987 |
| 1986 | £448 — £448 | 1 variant | Price my 1986 |
| 1985 | £448 — £448 | 1 variant | Price my 1985 |
| 1984 | £448 — £448 | 1 variant | Price my 1984 |
| 1983 | £448 — £448 | 1 variant | Price my 1983 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Discoverys can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,469 Trustpilot reviews.
Booking your Discovery windscreen replacement is straightforward — from quote to fitting day takes just a few steps.
Answer a quick online quiz about your Discovery's year, trim, and features — takes about a minute. Our system identifies your exact windscreen variant from the 28 options in our catalogue.
Receive an instant quote. Review it, then proceed to checkout — the full booking is done in under two minutes.
Our parts check team confirms your glass is in stock and matches your factory specification, including any ADAS brackets, camera mounts, or acoustic features.
You're matched with a local specialist near you. If your Discovery has an InControl camera system, we'll schedule the job at a workshop so static calibration can be completed after the glass is fitted.
On fitting day, the specialist replaces your windscreen (typically 45–90 minutes of their time for a non-ADAS fit; longer if calibration is involved). If calibration is needed, it runs in parallel with adhesive cure — you can drive away as soon as the fitter confirms it's ready.
Your replacement comes with a two-year warranty covering workmanship and glass quality. The specialist provides aftercare advice before you leave.
Your Discovery is back on the road with a matched, UK-approved windscreen — booked and fitted by specialists near you.
Most Discovery windscreen replacements can be done mobile at your home or workplace. However, if your model is equipped with an InControl front camera system for Lane Keep Assist or Collision Warning, the specialist will schedule the job at a workshop.
Why? Static camera calibration requires a controlled environment with target boards and specialist equipment — it can't be done safely on a driveway. The full job (replacement and calibration) happens at one location so you know the safety system is properly recalibrated before you drive away.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
Light sensors automatically turn your headlights on at dusk or in tunnels; the replacement windscreen must include the sensor bracket.
A light sensor is a small optical detector mounted on the windscreen or dashboard that monitors ambient light levels. When light drops below a threshold—at dusk or when entering a tunnel—it triggers your headlights to switch on automatically. This removes the need to manually operate the lights and improves safety by ensuring visibility when conditions darken suddenly. The sensor is typically mounted behind the windscreen's top edge or integrated into the interior mirror housing, where it has an unobstructed view of the sky.
Check your vehicle's handbook or ask your dealer whether your car has automatic headlight control or 'auto lights' as a feature. If equipped, you'll see a symbol on the stalk or dashboard dial marked with a light-bulb icon or 'AUTO' setting. When you select this mode and the ambient light dims, the headlights activate without manual input. Not all cars have this feature; it's typically found on newer or higher-specification models.
When replacing a windscreen on a vehicle with a light sensor, the replacement glass must include the correct sensor bracket or mounting point to preserve the auto-headlight function. The sensor itself does not require software calibration—it relies on physical positioning behind the windscreen's upper trim or within the mirror assembly. Ensuring the bracket is correctly installed during the fit is essential; if omitted, the auto-light feature will fail and cannot be restored without additional parts and labour.
Dynamic calibration uses road driving to recalibrate your camera after windscreen replacement.
Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.
Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.
After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.
We confirm the exact procedure for your specific vehicle when you book.
Dual cameras mounted near the rear-view mirror provide advanced driver-assistance features like collision avoidance and lane-keeping.
A stereo camera is a pair of cameras mounted in the upper windscreen area, typically embedded in or near the rear-view mirror housing. These cameras work together to capture depth information, allowing the vehicle's safety and driver-assistance systems to detect obstacles, measure distances, recognise lane markings, and monitor road signs. Stereo cameras are central to modern collision-avoidance, adaptive cruise control, lane-keeping assistance, and pedestrian-detection systems. Unlike single cameras, the dual-lens setup provides three-dimensional awareness, enabling more accurate decision-making by the vehicle's control modules.
Look in the dark area of the windscreen near the top, directly above or slightly offset from the rear-view mirror. You will see two small lens housings — typically circular or oval — separated by a small gap. Some vehicles display a camera symbol on the dashboard or in the instrument cluster when the system is active. Your vehicle's handbook or service centre can confirm the presence and type of camera system if you're uncertain.
Stereo cameras are bracket-mounted to the windscreen frame and require careful removal and reinstallation during replacement. The camera alignment is critical for safe operation — even small deviations can impair collision detection and lane-keeping accuracy. After windscreen replacement, your vehicle's camera system may require static or dynamic calibration depending on the specific make and model. We confirm the exact calibration procedure and schedule when we look up your vehicle. Calibration ensures the dual lenses are precisely aligned and the depth-sensing algorithms function correctly.
We confirm the exact procedure for your specific vehicle when you book.
The moulded trim that surrounds your camera and sensor cluster at the top of the windscreen, typically transferred or supplied with replacement glass.
A bracket for safety features is the moulded plastic or composite shroud that sits at the top of the windscreen, framing and protecting the camera and sensor cluster mounted behind the rear-view mirror. This trim cover houses forward-facing driver-assistance cameras and sensors — equipment that monitors the road ahead for lane-keeping, collision warning, adaptive cruise control, and similar safety functions. The bracket itself is part of the vehicle's structural frame, but the trim cover you see is what protects and aesthetically integrates the technology into the windscreen area.
Look at the top centre of your windscreen, just above or around the rear-view mirror. If you see a dark moulded shroud or trim panel — often rectangular or tapered — with a visible lens or sensor window, your vehicle has a bracket for safety features. Your service history or handbook will list any ADAS (Advanced Driver Assistance System) technologies fitted. Ask your dealer or service centre if your vehicle has forward-facing cameras or sensors; if it does, you have a bracket for safety features.
On windscreen replacement, the trim cover is typically transferred from your old glass to the new one, or supplied pre-integrated with the replacement depending on the variant. This means minimal disruption to your safety system during the swap. However, if the bracket requires recalibration after glass replacement — which depends on your specific vehicle and camera type — the job may require static calibration (using a target board) or dynamic calibration (a road drive). We confirm the exact calibration procedure when we look up your vehicle.
We confirm the exact procedure for your specific vehicle when you book.
Clear windscreen glass has no tint; most cars have a slight tint as standard.
A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.
Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.
Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.
We confirm the exact procedure for your specific vehicle when you book.
Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.
A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.
Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.
When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.
A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.
A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.
Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.
Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
A defogging detector automatically clears condensation from your windscreen, improving visibility in damp conditions.
A defogging detector is a sensor that monitors moisture levels on the windscreen and triggers the demister system automatically when condensation builds up. It improves driver visibility and safety in damp or cold weather by preventing manual intervention. The sensor typically sits near the rear-view mirror, positioned to sense moisture accumulation on the glass surface.
Check your vehicle's handbook or ask your dealer's service centre whether your model includes an automatic defogging or moisture-sensing demister. Look near the rear-view mirror for a small sensor unit. Some vehicles display an indicator light or message on the dashboard when the system is active.
The defogging detector does not affect windscreen replacement or require recalibration after fitting. The sensor itself remains in place and continues to function once the new windscreen is installed. No additional calibration, cure time, or specialist procedures are needed.
The Land Rover Discovery has been in continuous production since 1989, evolving through five generations with significant changes to its windscreen specification and safety systems.
Earlier models carry straightforward laminated windscreens, whilst later Discoveries from the mid-2010s onwards feature rain sensors, acoustic interlayers, and solar-control glass as options. Many also include a VIN notch along the bottom edge — a small box displaying the chassis number.
From around 2017 onwards, the InControl driver assistance suite introduced front-facing cameras mounted at the windscreen, supporting Lane Keep Assist, Lane Departure Warning, and Forward Collision Warning. These camera-equipped variants require static calibration after windscreen replacement, which is carried out by the specialist you're matched with.
Own a different Land Rover? We've got you — every variant, every year.
The questions customers ask us most often.
