Instant quote across Hyundai IONIQ 5 variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Hyundai
Model
IONIQ 5
No card required · Free to quote
Price variation on the IONIQ 5 depends primarily on the presence of acoustic glass (fitted to some variants for noise reduction) and the specific fitting hardware configuration. All variants carry the camera-based SmartSense system, so every replacement includes calibration costs.
Earlier 2021 models may differ slightly in specification from 2022 variants, which can influence the final quote.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2022 | £809 — £1,122 | 2 variants | Price my 2022 |
| 2021 | £809 — £809 | 1 variant | Price my 2021 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older IONIQ 5s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
From your online quote to a scheduled appointment with a local technician, the booking process is straightforward.
Answer a short online quiz about your IONIQ 5 (year, features) — takes about a minute.
Receive an instant quote covering your exact windscreen specification.
Complete your booking in under two minutes with our secure checkout.
Our parts-check team confirms your replacement glass matches your factory specification.
A technician near you is matched to your job and you receive a confirmed appointment.
On the day, your fitter replaces the windscreen, runs the required SmartSense camera calibration, and confirms your drive-away time before leaving.
Your replacement is covered by a two-year warranty on workmanship and glass quality.
Because every IONIQ 5 variant in our catalogue is equipped with the SmartSense front-view camera, your windscreen replacement requires static calibration after fitting. This calibration uses a dedicated target board and Hyundai diagnostic equipment.
Whilst some technicians may have mobile calibration capability, many prefer a workshop environment for the precision this safety-critical system demands. Your local technician will confirm whether your booking is mobile or workshop-based during the appointment confirmation.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Acoustic glass reduces cabin noise for a quieter, more comfortable ride.
Acoustic windscreen glass is laminated with a special acoustic interlayer that absorbs and dampens sound vibrations. It reduces exterior noise—from traffic, wind, and road surface—before it enters the passenger compartment. This makes the cabin noticeably quieter and creates a more peaceful driving experience. It's a comfort feature, not a safety one; standard laminated windscreens already meet impact safety requirements.
Check your windscreen for an ear symbol, the word 'Acoustic', a capital 'A', or the term 'SoundScreen' printed in one of the four corners. These markings indicate acoustic-grade glass. You can also ask your vehicle's dealership or service centre whether your model came fitted with acoustic glass—it's often a factory option on comfort or premium trims.
Acoustic glass is always laminated and bonds to the frame like any standard windscreen, so replacement follows the normal bonded-glass procedure. No specialist calibration is required. The replacement technician will fit it using standard adhesive and sealant. Cure time and drive-away restrictions are identical to standard laminated windscreens. Acoustic glass is widely available as an aftermarket OE-equivalent option.
A camera mounted near the rear-view mirror monitors the road ahead for lane-keep and traffic-sign features.
A forward-facing camera positioned in the windscreen header area (typically mounted on or near the rear-view mirror bracket) captures video of the road ahead. This camera feeds data to driver-assistance systems such as lane-departure warning, lane-keep assist, autonomous emergency braking, and traffic-sign recognition. The camera is a core component of modern ADAS (Advanced Driver Assistance Systems) and requires precise alignment after windscreen replacement to ensure these safety features function correctly.
Look for a small dark triangular or lens-shaped component mounted in the black plastic trim area above the windscreen, typically centred near the rear-view mirror or slightly to one side. Your vehicle's handbook or infotainment menu may reference 'Lane Assist', 'Traffic Sign Recognition', or 'Autonomous Emergency Braking'. Ask your dealer or service centre directly if your car is equipped with a forward-facing camera system.
Windscreen replacement on camera-equipped vehicles requires calibration of the camera system after the new glass is fitted. The exact calibration procedure—whether static (using a target board in a controlled environment) or dynamic (road-based)—varies by vehicle make, model, and year. We confirm the precise calibration requirement when we look up your specific vehicle. Calibration ensures lane-keep, sign recognition, and emergency-braking systems function safely. This may extend the fitting schedule and may necessitate workshop-based fitting rather than mobile attendance.
A defogging detector automatically clears condensation from your windscreen, improving visibility in damp conditions.
A defogging detector is a sensor that monitors moisture levels on the windscreen and triggers the demister system automatically when condensation builds up. It improves driver visibility and safety in damp or cold weather by preventing manual intervention. The sensor typically sits near the rear-view mirror, positioned to sense moisture accumulation on the glass surface.
Check your vehicle's handbook or ask your dealer's service centre whether your model includes an automatic defogging or moisture-sensing demister. Look near the rear-view mirror for a small sensor unit. Some vehicles display an indicator light or message on the dashboard when the system is active.
The defogging detector does not affect windscreen replacement or require recalibration after fitting. The sensor itself remains in place and continues to function once the new windscreen is installed. No additional calibration, cure time, or specialist procedures are needed.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.
A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. The image typically appears to float a few feet ahead of the car. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.
Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.
Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
The Hyundai IONIQ 5 launched in 2021 as Hyundai's flagship electric vehicle, bringing advanced driver assistance systems as standard across the range. All variants in our catalogue feature a front-view camera mounted to the windscreen as part of the Hyundai SmartSense suite, which handles lane-keeping and forward collision avoidance.
The windscreen itself carries a subtle green tint (typical on most modern vehicles) and includes a rain sensor for automatic wiper activation. Some variants are equipped with acoustic laminated glass to reduce cabin noise, whilst others feature fitting hardware pre-mounted on the replacement unit.
Because every IONIQ 5 in our system has a camera, windscreen replacement requires static calibration using Hyundai diagnostic equipment after the glass is fitted. This is a safety-critical step to ensure SmartSense functions correctly.
Own a different Hyundai? We've got you — every variant, every year.
The questions customers ask us most often.
