Instant quote across Chevrolet Suburban windscreen variants in under 60 seconds, fitted by approved fitters — booked in under two minutes.
Make
Chevrolet
Model
Suburban
No card required · Free to quote
Prices vary with generation and ADAS equipment. Earlier Suburbans without cameras are typically the most affordable; newer models with Chevy Safety Assist carry higher calibration costs as the forward-facing camera must be recalibrated after replacement. Solar control, blue sun strip, encapsulation, and rain sensor availability also influence the final glass specification.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £498 — £567 | 2 variants | Price my 2026 |
| 2025 | £498 — £567 | 2 variants | Price my 2025 |
| 2024 | £498 — £567 | 2 variants | Price my 2024 |
| 2023 | £498 — £567 | 2 variants | Price my 2023 |
| 2022 | £498 — £567 | 2 variants | Price my 2022 |
| 2021 | £498 — £567 | 2 variants | Price my 2021 |
| 2020 | £498 — £567 | 2 variants | Price my 2020 |
| 2019 | £498 — £567 | 2 variants | Price my 2019 |
| 2018 | £498 — £567 | 2 variants | Price my 2018 |
| 2017 | £498 — £567 | 2 variants | Price my 2017 |
| 2016 | £498 — £567 | 2 variants | Price my 2016 |
| 2015 | £498 — £567 | 2 variants | Price my 2015 |
| 2014 | £498 — £567 | 2 variants | Price my 2014 |
| 2013 | £498 — £567 | 2 variants | Price my 2013 |
| 2012 | £498 — £567 | 2 variants | Price my 2012 |
| 2011 | £498 — £567 | 2 variants | Price my 2011 |
| 2010 | £498 — £567 | 2 variants | Price my 2010 |
| 2009 | £498 — £567 | 2 variants | Price my 2009 |
| 2008 | £498 — £567 | 2 variants | Price my 2008 |
| 2007 | £498 — £567 | 2 variants | Price my 2007 |
| 2006 | £567 — £567 | 1 variant | Price my 2006 |
| 2005 | £567 — £567 | 1 variant | Price my 2005 |
| 2004 | £567 — £567 | 1 variant | Price my 2004 |
| 2003 | £567 — £567 | 1 variant | Price my 2003 |
| 2002 | £567 — £567 | 1 variant | Price my 2002 |
| 2001 | £567 — £567 | 1 variant | Price my 2001 |
| 2000 | £567 — £567 | 1 variant | Price my 2000 |
| 1999 | £567 — £567 | 1 variant | Price my 1999 |
| 1998 | £567 — £567 | 1 variant | Price my 1998 |
| 1997 | £567 — £567 | 1 variant | Price my 1997 |
| 1996 | £567 — £567 | 1 variant | Price my 1996 |
| 1995 | £567 — £567 | 1 variant | Price my 1995 |
| 1994 | £567 — £567 | 1 variant | Price my 1994 |
| 1993 | £567 — £567 | 1 variant | Price my 1993 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Suburbans can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Booking your Suburban windscreen replacement through UKCG is straightforward and takes just a few minutes.
Answer a short guided quiz about your Suburban's year and features to identify your exact windscreen variant.
Receive an instant quote and choose a convenient time for fitting.
Our network of approved fitters will match you with a technician in your area.
On the day, your fitter arrives with the correct replacement glass and fits it in typically 45–90 minutes of active work time; if your model requires ADAS calibration, the technician completes this as part of the same appointment.
Your fitter will confirm the minimum drive-away time before you leave—cure runs in parallel with calibration, so it doesn't extend the time before you can drive.
You'll receive a two-year warranty covering workmanship and glass quality.
The whole process is designed to be convenient—no dealership markup, no back-and-forth, just a vetted specialist and peace of mind.
Most Suburban windscreen replacements can be carried out at your home or workplace as a mobile appointment. However, if your model is equipped with Chevy Safety Assist (camera-based lane keeping, automatic emergency braking, or forward collision alert), the ADAS recalibration is typically performed at a workshop using static calibration equipment.
When calibration is required, the entire job—replacement and recalibration together—is scheduled at the workshop as a single appointment, so the camera is properly aligned before you drive away. Your fitter will confirm the location and timing during booking.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Pre-fitted clips and brackets that secure the glass to your vehicle, supplied ready to bond as a complete unit.
Fitting hardware comprises the clips, brackets, mouldings and adhesive retention components that hold the glass securely in place on your vehicle's frame. When your replacement glass is supplied with fitting hardware pre-attached, it arrives as a ready-to-install assembly rather than as bare glass requiring separate hardware attachment during the fit. This streamlines the replacement process and ensures correct positioning and fitment.
Check your vehicle's service history or contact your dealership service department with your registration number. They can confirm whether your glass comes with pre-fitted hardware as standard. Visually, pre-fitted hardware appears as clips or brackets already bonded or attached to the glass edges before it reaches the fitting technician.
Glass supplied with pre-fitted hardware typically requires no additional labour to attach clips or brackets during the fit, reducing technician time at the vehicle. The hardware must be in good condition and correctly positioned for the glass to seal and function properly. If hardware is damaged during removal of the old glass, replacement or repair of that hardware may be needed before the new glass can be fitted securely.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
A printed VIN reference box along the bottom edge of your windscreen helps identify your vehicle's chassis number at a glance.
A VIN (Vehicle Identification Number) notch is a small printed or etched box positioned along the lower edge of the windscreen that displays your vehicle's chassis number. This reference marking is a manufacturing and administrative feature, allowing quick visual identification of the vehicle without needing to consult documents. It's particularly useful for service records, insurance claims, and vehicle registration purposes. The notch itself doesn't affect the structural integrity or safety performance of the glass.
Look along the bottom edge of your windscreen — typically in one of the lower corners — for a small rectangular box containing printed digits or characters. If you're uncertain, check your vehicle's service handbook or ask your dealership or service centre to confirm whether your model includes this feature.
When your windscreen is replaced, the new glass will retain the VIN notch printed or etched by the manufacturer. This is a standard feature on replacement windscreens for compatible vehicles and requires no additional work or adjustment. The notch does not affect glass fitting, cure time, or any post-replacement calibration procedures.
The Chevrolet Suburban has been America's iconic full-size SUV since 1935, with continuous production and regular generational updates ensuring steady availability of replacement glass.
Modern Suburbans feature laminated windscreens with a green tint that's present across all variants, alongside solar-control glass designed to reduce interior heat from the sun's infrared rays. Some variants also include a blue sun strip across the top of the windscreen, encapsulated trim bonding, rain sensors for automatic wiper activation, and a VIN notch stamped along the bottom edge.
From 2020 onwards, most Chevrolet commercial vehicles—including newer Suburbans equipped with Chevy Safety Assist—carry a forward-facing camera mounted to the windscreen for features like automatic emergency braking and forward collision alert. Windscreen replacement on these models requires ADAS recalibration after the glass is fitted.
Own a different Chevrolet? We've got you — every variant, every year.
The questions customers ask us most often.
