BMW 7 Series windscreen replacement — booked online.

What to expect during your BMW 7 Series windscreen replacement

Here's how your BMW 7 Series windscreen replacement works from start to finish.

1. 1

   Use our online widget to select your 7 Series year, generation, and key features — you'll get an instant quote in under 60 seconds.

2. 2

   Complete your booking online in about a minute. Our team then runs a detailed parts check to confirm your exact glass specification, including any ADAS camera brackets, rain sensors, or acoustic interlayers.

3. 3

   We match you with a specialist in your area who has the right equipment for your variant. If your 7 Series has a camera system, we confirm whether the job can be done mobile or needs a workshop for calibration.

4. 4

   On fitting day, the technician arrives with your matched glass and completes the replacement. If ADAS calibration is required, it happens as part of the same visit — typically taking longer than non-camera jobs, but your drive-away time is confirmed before they leave.

5. 5

   After the fit, your windscreen is covered by our two-year warranty. For camera-equipped vehicles, calibration is validated and documented — you'll receive confirmation that the system has been successfully recalibrated.

Questions about your specific 7 Series variant or ADAS setup? Our team can clarify any detail before you book.

What features does your 7 Series have?

Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.

• Vin Notch31

  1994–2026

  On the BMW 7 Series: fitted on 31 of the 33 windscreen variants we list (94%); model years 1994–2026.

  What it means

  A printed box showing the vehicle's chassis number at the base of the windscreen — present on nearly all 7 Series models.

  On your BMW 7 Series

  Standard on almost all 7 Series variants from the 1990s onwards; confirmed during the quote.

• Rain Sensor28

  1994–2026No calibration after replacement

  On the BMW 7 Series: fitted on 28 of the 33 windscreen variants we list (85%); model years 1994–2026; no calibration after replacement.

  What it means

  An integrated sensor that automatically activates your wipers when it detects rain. On newer 7 Series, it's often combined with the ADAS camera unit.

  On your BMW 7 Series

  Fitted to most models from the mid-2000s onwards. Higher trims and newer generations are more likely to have this feature; confirmed during the quote.

• Green25

  1986–2026

  On the BMW 7 Series: fitted on 25 of the 33 windscreen variants we list (76%); model years 1986–2026.

  What it means

  A subtle green tint in the laminate (not visible at first glance) that reduces glare and heat from above. About 75% of all 7 Series windscreens carry this tint.

  On your BMW 7 Series

  Confirmed during the parts check — no visual inspection needed on your part. The replacement must match the original tint.

• Heated Windscreen15

  1986–2008

  On the BMW 7 Series: fitted on 15 of the 33 windscreen variants we list (45%); model years 1986–2008.

  Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.

  What it means

  A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.

  How to tell

  Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.

  Replacement impact

  Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.

• Heated Wiper Rest Area15

  1986–2008

  On the BMW 7 Series: fitted on 15 of the 33 windscreen variants we list (45%); model years 1986–2008.

  Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.

  What it means

  A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.

  How to tell

  Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.

  Replacement impact

  When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.

• Acoustic (Noise reduction)12

  2008–2026

  On the BMW 7 Series: fitted on 12 of the 33 windscreen variants we list (36%); model years 2008–2026.

  What it means

  A noise-reducing PVB laminate that dampens road and wind noise — a premium comfort feature. Look for 'Acoustic' or 'SoundScreen' printed in a corner of the glass.

  On your BMW 7 Series

  More common on higher-spec and newer 7 Series variants. Confirmed during the quote — no self-inspection needed.

• HUD - Head Up Display12

  2008–2026No calibration after replacement

  On the BMW 7 Series: fitted on 12 of the 33 windscreen variants we list (36%); model years 2008–2026; no calibration after replacement.

  A Head-Up Display projects your speed, navigation cues and key alerts onto the windscreen so you can read them without looking down.

  What it means

  A Head-Up Display (HUD) projects driving information — speed, navigation cues, ADAS alerts — onto the windscreen in your line of sight, so you can read it without taking your eyes off the road. The projector is mounted in the dashboard and shines the image upwards onto a special HUD-compatible windscreen that uses a wedge-shaped laminate to prevent a ghost image. Common on premium and sports models, increasingly standard on mid-range cars from the 2020s onwards.

  How to tell

  Check your vehicle's specification sheet or handbook under 'display features' or 'HUD'. Look for a small projector unit mounted on the dashboard, typically below the steering wheel or in the instrument cluster area. When you start the vehicle, a bright image should appear on the lower windscreen area. Your dealer's service centre can confirm whether your specific model and trim level includes a HUD.

  Replacement impact

  Your replacement windscreen needs to be HUD-compatible — built with the correct wedge laminate so the projected image stays sharp and double-free. Once the HUD-compatible glass is fitted, the projector itself typically doesn't need recalibration: image position is user-adjustable via your dashboard controls. We confirm your vehicle uses the HUD-compatible windscreen variant when ordering, so the replacement matches the original.

• Camera11

  2008–2026Calibration varies by vehicle

  On the BMW 7 Series: fitted on 11 of the 33 windscreen variants we list (33%); model years 2008–2026; calibration varies by vehicle.

  What it means

  A mono-camera mounted behind the windscreen for lane departure warning and adaptive cruise control, part of the Driving Assistant package. Requires recalibration after replacement.

  On your BMW 7 Series

  Present on many G-code 7 Series (2015–present) fitted with Driving Assistant or Driving Assistant Professional packages. Check your vehicle's spec or ask during the quote.

• Solar Control11

  2001–2016

  On the BMW 7 Series: fitted on 11 of the 33 windscreen variants we list (33%); model years 2001–2016.

  What it means

  A heat-absorbing coating that reflects infrared rays from the sun, helping keep the cabin cooler and reducing air-con load. Often paired with acoustic glass on premium trims.

  On your BMW 7 Series

  Typically fitted to higher-spec variants and more recent models. Confirmed during the quote.

• Bracket For Safety Features10

  2008–2023Calibration varies by vehicle

  On the BMW 7 Series: fitted on 10 of the 33 windscreen variants we list (30%); model years 2008–2023; calibration varies by vehicle.

  What it means

  A moulded shroud that sits over the camera bracket at the top of the windscreen, near the rear-view mirror. Usually transferred from the old glass to the new one.

  On your BMW 7 Series

  Fitted to any 7 Series with a front-facing ADAS camera. Confirmed during the quote.

  Calibration mix across our BMW variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Dynamic Camera Calibration Process9

  2008–2023Calibration varies by vehicle

  On the BMW 7 Series: fitted on 9 of the 33 windscreen variants we list (27%); model years 2008–2023; calibration varies by vehicle.

  Dynamic calibration uses road driving to recalibrate your camera after windscreen replacement.

  What it means

  Dynamic camera calibration is a procedure in which a technician drives the vehicle on marked roads at set speeds after the windscreen has been fitted and the adhesive has cured. During this drive, the forward-facing camera relearns its reference points — lane markings, road signs, road edges and surrounding traffic patterns — so it can resume accurate operation of camera-dependent safety and driver-assistance systems. This recalibration is necessary because any windscreen replacement, even with precision fitting, can introduce small shifts in the camera's optical alignment relative to the road.

  How to tell

  Check your vehicle's handbook or contact your dealer to confirm whether your car has a forward-facing camera system. If it does, ask the dealer whether your specific model requires dynamic (road-drive) or static (target-board) calibration after windscreen replacement. You can also ask your fitter — they will establish this when they look up your vehicle's specification.

  Replacement impact

  After your windscreen is fitted and the bonding has cured, a technician will drive the vehicle on marked roads at controlled speeds to allow the camera to relearn its environment. This extends the overall job duration beyond the glass-fitting time alone. Depending on your vehicle, calibration may be performed during the same visit or scheduled separately. We confirm the exact procedure and location (mobile or workshop) when we look up your specific vehicle.

  Calibration mix across our BMW variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Mono Camera9

  2008–2023Calibration varies by vehicle

  On the BMW 7 Series: fitted on 9 of the 33 windscreen variants we list (27%); model years 2008–2023; calibration varies by vehicle.

  A single camera mounted near the rear-view mirror that helps with lane-keeping and collision avoidance.

  What it means

  A mono camera is a single-lens camera positioned behind the windscreen, typically in the upper centre area near the rear-view mirror. It captures the road ahead and uses computer vision to detect lane markings, vehicles, and road hazards. The camera feeds data to driver-assistance systems such as lane-keeping assist, lane-departure warning, and forward-collision warning. It forms the visual foundation of these safety features, allowing the vehicle to monitor road position and surrounding traffic automatically.

  How to tell

  Look in the black trim area above the windscreen, centred behind the rear-view mirror — you will see a small triangular lens assembly or dark lens cover. Check your vehicle handbook or ask your dealer's service department to confirm your model has lane-assistance or collision-warning features; vehicles with these systems almost always have a mono camera. Dashboard warning symbols related to lane or collision systems also indicate the presence of this camera.

  Replacement impact

  When the windscreen is replaced, the camera bracket and lens assembly must be removed and carefully repositioned on the new glass. The camera may require calibration after fitting to ensure accurate road detection and lane recognition. Calibration needs vary by vehicle — we confirm the exact procedure when we look up your specific vehicle. The job may take longer than a standard windscreen replacement, and workshop facilities may be required if calibration demands a controlled environment.

  Calibration mix across our BMW variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Clear8

  1994–2026Calibration varies by vehicle

  On the BMW 7 Series: fitted on 8 of the 33 windscreen variants we list (24%); model years 1994–2026; calibration varies by vehicle.

  Clear windscreen glass has no tint; most cars have a slight tint as standard.

  What it means

  A clear windscreen contains no added tint layer. Most modern windscreens incorporate a subtle tint (typically blue, green, grey or bronze) as standard to reduce glare, provide UV protection, and improve cabin comfort. A genuinely clear windscreen is the absence of this tint. Clear glass is less common than tinted variants and is sometimes specified for aesthetic or operational reasons, though the tint difference is usually imperceptible to the naked eye.

  How to tell

  Lower your side window halfway and hold a white piece of paper behind it. If you see a noticeable colour cast (blue, green, grey or bronze) in the side glass, your windscreen has the same tint. You can also ask your vehicle's dealership or service centre to confirm the windscreen specification in your service records.

  Replacement impact

  Clear windscreen replacement uses the same installation process as any other windscreen. No special calibration or extended cure time applies. Sourcing is straightforward — clear glass is widely available as an aftermarket replacement. Installation time and drive-away restrictions follow standard windscreen replacement timings. If your vehicle has ADAS features (forward-facing camera or radar), calibration may be required after replacement depending on your specific vehicle; we confirm this when we look up your car details.

  Calibration mix across our BMW variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Coating8

  1994–2026

  On the BMW 7 Series: fitted on 8 of the 33 windscreen variants we list (24%); model years 1994–2026.

  Coated windscreens have a blue or purple tint and protect your car from UV rays and heat.

  What it means

  A coated windscreen has a special protective layer applied to the glass that appears as a blue or purple tint and often reflects a silvery-blue colour in bright sunlight. This coating is designed to reduce the amount of ultraviolet (UV) radiation and solar heat that enters the vehicle, helping to keep the interior cooler and protecting upholstery and dashboard components from UV damage and fading. The coating is integral to the glass and doesn't require any special maintenance from you.

  How to tell

  Look at your windscreen in bright daylight — a coated windscreen will show a distinct blue or purple tint and a silvery-blue reflection when the sun hits it directly. Check your vehicle's service booklet or window sticker (usually on the driver's door jamb), which may list the glass specification. Alternatively, ask your dealership or service centre to confirm whether your windscreen carries a UV or heat-rejection coating.

  Replacement impact

  When replacing a coated windscreen, the replacement glass must match the original specification — including the coating type and tint level — to maintain the same UV and heat protection and to preserve the vehicle's interior aesthetics. Original-equipment or equivalent aftermarket coated glass is sourced to specification. The coating is applied during glass manufacture; no post-fit treatment is required. Fitting and cure times are unaffected by the presence of the coating.

• Green Sun Strip8

  1986–2008

  On the BMW 7 Series: fitted on 8 of the 33 windscreen variants we list (24%); model years 1986–2008.

  A green-tinted band at the windscreen's top edge that reduces glare from sunlight above.

  What it means

  A green sun strip is a graduated tint band integrated into the windscreen's laminate at the upper edge. It filters intense sunlight and glare from above — particularly useful on motorways and in bright conditions — whilst maintaining clarity through the main viewing area below. The tint is permanent, fused into the laminate layer during manufacture, and cannot be applied or removed afterwards. Sun strips are a windscreen-only feature because they must be built into the laminate during production; side and rear glass cannot carry them as they are typically toughened rather than laminated.

  How to tell

  Look at the top edge of your windscreen from the inside. A sun strip appears as a distinct green-tinted gradient band that fades from darker at the very top to clear below. It is visible whether the car is parked or moving. You can also check your vehicle's specification sheet or ask your dealership or current service centre to confirm whether your windscreen includes a sun strip.

  Replacement impact

  The replacement windscreen must be the green sun strip variant to match your original. This is not a post-fit addition; it must be ordered as part of the glass itself. Availability is usually straightforward for current and recent models from major manufacturers, though older or less common variants may require a longer lead time. The sun strip does not affect calibration requirements or cure time — it is simply a laminate feature and does not complicate the fitting process.

• Sensor Heated Zone4

  2015–2023Calibration varies by vehicle

  On the BMW 7 Series: fitted on 4 of the 33 windscreen variants we list (12%); model years 2015–2023; calibration varies by vehicle.

  Heated zones around sensors prevent frost and moisture buildup, helping your safety systems work reliably.

  What it means

  A sensor heated zone is an electrical heating element integrated into or around camera, radar, or sensor mounts on the windscreen. Its purpose is to prevent frost, ice, condensation, and moisture accumulation on sensor lenses and housings. This keeps safety systems — such as lane-keeping assist, collision warning, and adaptive cruise control — functioning accurately in cold, wet, or foggy conditions. Without this heating, moisture or ice can obscure sensors and cause them to malfunction or deactivate.

  How to tell

  Check your vehicle's handbook for mention of 'heated sensor zone' or 'sensor heating' in the windscreen or ADAS section. Look at the top edge of your windscreen where cameras or radar modules are mounted — you may see small heating elements or wiring near these components. Ask your dealership or service centre directly: they can confirm whether your specific model includes sensor heating as standard.

  Replacement impact

  Windscreens with heated sensor zones require careful handling during replacement to preserve the heating element and its electrical connections. The heating circuit must be reconnected properly after the new glass is fitted. Depending on the vehicle, this may involve static or dynamic camera calibration after installation. We confirm the exact procedure — including any calibration needs — when we look up your vehicle details.

  Calibration mix across our BMW variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• Grey Sun Strip2

  2008–2016

  On the BMW 7 Series: fitted on 2 of the 33 windscreen variants we list (6%); model years 2008–2016.

  A grey-tinted band across the top of your windscreen that reduces glare from sunlight and reflections above.

  What it means

  A grey sun strip is a tinted gradient band built into the top edge of the windscreen during manufacture. It sits within the laminated glass layers and gradually fades from opaque grey at the very top to clear further down. The strip is designed to reduce glare and reflections from sunlight, street lights, and oncoming headlights, improving comfort and visibility for the driver without obstructing the view of traffic signals or overhead hazards. Sun strips are a factory-applied feature unique to windscreens—they cannot be added to side or rear glass because those are typically toughened rather than laminated.

  How to tell

  Look at the top of your windscreen from inside the vehicle. You will see a grey-tinted band that fades to clear glass. The tint is gradual and integral to the glass itself, not a removable film or coating. Your vehicle's service records or handbook may also list it as a standard feature. If unsure, ask your dealer or service centre whether your specific model includes a sun strip.

  Replacement impact

  When replacing a windscreen with a sun strip, the replacement glass must be sourced in the exact matching variant—including the sun-strip tint and fade profile. Aftermarket and OE glass are both available for most vehicles, but the variant must be correct to match your original. There is no calibration required for the sun strip itself. If your windscreen also carries camera or sensor features, those will be calibrated separately according to your vehicle's needs.

• Stereo Camera1

  2019–2023Calibration varies by vehicle

  On the BMW 7 Series: fitted on 1 of the 33 windscreen variants we list (3%); model years 2019–2023; calibration varies by vehicle.

  Dual cameras mounted near the rear-view mirror provide advanced driver-assistance features like collision avoidance and lane-keeping.

  What it means

  A stereo camera is a pair of cameras mounted in the upper windscreen area, typically embedded in or near the rear-view mirror housing. These cameras work together to capture depth information, allowing the vehicle's safety and driver-assistance systems to detect obstacles, measure distances, recognise lane markings, and monitor road signs. Stereo cameras are central to modern collision-avoidance, adaptive cruise control, lane-keeping assistance, and pedestrian-detection systems. Unlike single cameras, the dual-lens setup provides three-dimensional awareness, enabling more accurate decision-making by the vehicle's control modules.

  How to tell

  Look in the dark area of the windscreen near the top, directly above or slightly offset from the rear-view mirror. You will see two small lens housings — typically circular or oval — separated by a small gap. Some vehicles display a camera symbol on the dashboard or in the instrument cluster when the system is active. Your vehicle's handbook or service centre can confirm the presence and type of camera system if you're uncertain.

  Replacement impact

  Stereo cameras are bracket-mounted to the windscreen frame and require careful removal and reinstallation during replacement. The camera alignment is critical for safe operation — even small deviations can impair collision detection and lane-keeping accuracy. After windscreen replacement, your vehicle's camera system may require static or dynamic calibration depending on the specific make and model. We confirm the exact calibration procedure and schedule when we look up your vehicle. Calibration ensures the dual lenses are precisely aligned and the depth-sensing algorithms function correctly.

  Calibration mix across our BMW variants

  • 1Static

  We confirm the exact procedure for your specific vehicle when you book.

• BMW 3 Series From £270
• BMW X5 From £280
• BMW Z4 From £291
• BMW 6 Series From £300
• BMW 1 Series From £308
• BMW X1 From £315
• BMW 3 Series GT From £350
• BMW X3 From £357
• BMW 5 Series From £363
• BMW 2 Series From £368
• BMW X6 From £378
• BMW 4 Series From £400