Instant quote across Alfa Romeo 166 variants from 1998–2007, fitted by approved fitters — booked in under two minutes.
Make
Alfa Romeo
Model
166
No card required · Free to quote
Pricing varies based on generation and equipment level. Earlier 166 models without heated windscreens or rain sensors are typically more affordable, while later variants with heated glass and advanced comfort features carry higher replacement costs. Solar control and acoustic options, where fitted, also influence the final price.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2007 | £392 — £439 | 4 variants | Price my 2007 |
| 2006 | £392 — £439 | 4 variants | Price my 2006 |
| 2005 | £392 — £439 | 4 variants | Price my 2005 |
| 2004 | £392 — £439 | 4 variants | Price my 2004 |
| 2003 | £392 — £439 | 4 variants | Price my 2003 |
| 2002 | £392 — £439 | 4 variants | Price my 2002 |
| 2001 | £392 — £439 | 4 variants | Price my 2001 |
| 2000 | £392 — £439 | 4 variants | Price my 2000 |
| 1999 | £392 — £439 | 4 variants | Price my 1999 |
| 1998 | £392 — £407 | 2 variants | Price my 1998 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 166s can still be booked.
Curious why prices vary so widely? Read our UK windscreen replacement cost guide .
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Booking your Alfa Romeo 166 windscreen replacement takes just a few simple steps.
Take our online quote in under 60 seconds by answering a few questions about your 166 and its glass features.
Complete your booking online in under two minutes — choose your preferred date and location (mobile at your address or a local workshop).
Our parts verification team confirms your exact glass specification matches the factory original.
A technician from our network is matched to your job and fitted at your chosen time and place.
The fitter completes the replacement, typically within a couple of hours depending on your vehicle's specification.
Enjoy two years of warranty cover on workmanship and glass quality — supported by Trustpilot-rated specialists.
Your replacement glass matches your factory specification and is UK-approved for the road.
Most Alfa Romeo 166 windscreen replacements can be completed as a mobile visit at your home or workplace. The 166 predates widespread ADAS camera systems, so no calibration is typically required after replacement — your fitter can work on-site and confirm the drive-away time before they leave.
If you prefer a workshop visit for any reason, or if your specific variant includes features that benefit from a controlled environment, we can arrange that too. Mobile fitting remains the default and most convenient option.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
A blue-tinted gradient band across the top of your windscreen that reduces glare without affecting your view of the road.
A blue sun strip is a tinted gradient band built into the upper edge of your windscreen's laminate layer. It reduces glare from sunlight reflecting off the road and bonnet without darkening your main field of vision. The tint is created during manufacture as part of the glass laminate itself — it cannot be added or removed later. Sun strips are a windscreen-only feature; rear and side windows cannot carry this effect because they use tempered rather than laminated glass.
Look at the top of your windscreen from inside the car — you'll see a distinct blue-tinted band running horizontally across the upper portion. Check your vehicle's specification sheet or ask your dealership service centre whether your windscreen is listed as a 'blue sun strip' or 'tinted sun strip' variant. Your invoice or parts manual will confirm it.
When replacing a windscreen with a blue sun strip, the replacement must be the sun-strip variant — a standard plain windscreen will not replicate the tinted band. Your replacement glass is sourced as an exact match to your original specification. There are no additional calibration or cure implications beyond a standard windscreen replacement. Fitting and drive-away times remain unchanged.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
Heated windscreens use embedded wires to quickly clear ice and condensation in cold weather.
A heated windscreen is integrated with a fine mesh of electrical wires embedded within the glass itself. When activated, these wires generate heat to warm the windscreen surface, helping to rapidly clear frost, ice, and condensation during cold or damp conditions. This feature improves visibility and safety in winter driving and reduces reliance on engine heat and demister air, which can be slower on very cold mornings.
Check your vehicle's handbook or contact your dealership service centre — they can confirm whether your model includes this feature. Look for a dashboard symbol (usually a windscreen icon with heat waves) when you activate the function, or check your infotainment settings for a heating or climate option linked to the windscreen. Some vehicles have a dedicated button on the stalk or console.
Heated windscreens require replacement glass to be of the correct heated specification — standard unheated glass cannot be fitted. The replacement glass must be sourced to match your vehicle's exact heated-wire configuration. Installation is straightforward, though the technician will confirm the heating element is functioning correctly after fitting. No calibration is required for this feature.
Heating elements embedded in the glass melt ice from your wipers and the bottom of your windscreen.
A heated wiper rest area uses electric heating elements embedded into the windscreen in the area where your wipers park when not in use. These elements warm the glass to prevent ice and frost from bonding to the wiper blades and the lower windscreen edge during cold weather. This reduces the effort needed to clear ice in the morning and helps protect your wipers from damage caused by frozen adhesion to the glass.
Check your windscreen's lower edge where the wipers rest — you may see faint heating lines or elements visible in the glass. Your handbook or service history will confirm the feature. You can also ask your dealer or service centre whether your vehicle is equipped with a heated wiper rest area.
When replacing a windscreen with a heated wiper rest area, the replacement glass must include the heating elements. Aftermarket and OE glazing suppliers offer this feature, but availability varies by vehicle. The heating system does not require calibration after replacement, though the technician will ensure the heating element connections are properly restored during installation.
Your wipers automatically activate when rain falls on the windscreen.
A rain sensor is a device mounted on or behind the windscreen that detects moisture and triggers the wiper system automatically. The sensor uses infrared light to measure water droplets on the glass surface and signals the vehicle's electrical system to engage the wipers without driver input. This feature improves safety in sudden downpours and reduces driver workload in variable weather conditions.
Check your windscreen for a small sensor unit, usually mounted near the top centre behind the glass or at the base of the mirror. Look for a small dark component or lens. If your vehicle has automatic wipers that activate without you toggling the stalk, you have a rain sensor. Ask your dealer or service centre to confirm; they can check your vehicle records or wiper module settings.
Rain sensors are non-structural elements and do not require recalibration after windscreen replacement. The sensor bracket or mounting may need careful removal and reinstallation to ensure it sits correctly behind the new glass. If the sensor itself is damaged during removal, a replacement unit may be needed. Your fitter will confirm the condition and refit or replace the sensor as part of the standard replacement procedure.
The Alfa Romeo 166 was produced from 1998 to 2007 as a luxury executive saloon, serving as Alfa Romeo's flagship model across two generations. All variants in our catalogue feature a green-tinted windscreen with a blue sun strip and solar control glass, reducing infrared heat and glare for improved cabin comfort.
Around half of the active variants offer heated windscreens with a heated wiper rest area, alongside rain sensors for automatic wiper activation — features that add convenience during wet weather. These glass options represent the premium comfort specifications typical of the 166's positioning as a high-end saloon.
Own a different Alfa Romeo? We've got you — every variant, every year.
The questions customers ask us most often.
