Rear window replacement for your Seat Altea XL — instant quote across all variants in under 60 seconds, fitted by approved fitters near you.
Make
Seat
Model
Altea XL
No card required · Free to quote
Pricing varies based on whether your variant carries an encapsulated gasket, solar-control coating, or integrated antenna. Models with these features require matched replacement glass to restore the factory specification. Variants without these additions are typically the most affordable to replace.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2010 | £551 — £567 | 2 variants | Price my 2010 |
| 2009 | £315 — £567 | 6 variants | Price my 2009 |
| 2008 | £315 — £567 | 6 variants | Price my 2008 |
| 2007 | £315 — £567 | 6 variants | Price my 2007 |
| 2006 | £315 — £567 | 6 variants | Price my 2006 |
| 2005 | £315 — £567 | 6 variants | Price my 2005 |
| 2004 | £315 — £567 | 6 variants | Price my 2004 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older Altea XLs can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.81/5 from 1,468 Trustpilot reviews.
Booking your rear-window replacement with UKCG is a straightforward four-stage process.
Start with our online quote tool: answer a few quick questions about your Altea XL to identify your exact variant and get an instant price.
Proceed to checkout to secure your booking — the whole process takes under two minutes.
Our partner network matches you with a local technician who has the right glass in stock and can fit your vehicle at a time that suits you.
Your fitter arrives mobile at your address (or workshop, if you prefer) and fits the new rear window — typically 30–60 minutes depending on any integrated features.
After fitting, your fitter will confirm the drive-away time with you; a professional valet afterwards is recommended to ensure any small glass shards are fully cleared from the interior.
Your replacement is covered by a two-year warranty against workmanship and manufacturing defects.
From quote to fitted glass, you're supported by trusted local fitters and backed by our standard warranty.
Most Altea XL rear-window replacements are carried out mobile at your address — the straightforward, pre-ADAS era of this model means no camera calibration is needed. Your technician will fit the glass and clear accessible shards on the day. You're welcome to choose a workshop appointment if you prefer, though it's not required for this model.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Dark green tint on rear and side windows is a factory colour choice, not a safety or performance feature.
Dark green is a factory tint applied to the glass during manufacture. It's purely aesthetic — a colour variant chosen by the vehicle designer to complement the body paint and interior trim. Unlike some tints that reduce solar heat or glare, dark green is decorative. Most vehicles have standard or light green glass; dark green is less common and typically found on specific trim levels or model years.
Look at your rear and side windows from outside the car in daylight. If they appear noticeably darker or more saturated green than the front windscreen, you likely have dark green glass. You can also check your vehicle's specification sheet from the dealer or original documentation — tint colour is sometimes listed under 'glass' or 'exterior finishes'. If uncertain, ask your local dealership service centre.
Dark green replacement glass must match the original tint colour exactly — a standard or light green windscreen will look visibly mismatched against dark green rear windows. Sourcing the correct variant can take slightly longer than standard glass, as it's less common. No calibration is involved with tinted glass itself. Fitting and cure time are unaffected.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
The Seat Altea XL was produced from 2004 to 2010 as a practical seven-seat family MPV. Its rear window is a straightforward toughened-glass panel that can suffer impact damage or thermal stress over time.
Most variants carry a standard rear window with no integrated features, though some higher-specification models feature encapsulated gaskets (a pre-fitted rubber trim bonded to the glass edges at the factory) which simplify replacement. A minority of models also include solar-control coating or antenna integration, features confirmed during your quote.
Because this model era predates modern ADAS systems, rear-window replacement is straightforward — no camera recalibration needed, and fitting is typically completed in under an hour.
Own a different Seat? We've got you — every variant, every year.
The questions customers ask us most often.
