Emma B.
Verified on Trustpilot15 May 2026
I would highly recommend this company
I would highly recommend this company, good customer service, very good technician and one very happy customer
Rear window replacement for your Peugeot 2008 — instant quote across all variants, fitted by approved fitters near you.
Make
Peugeot
Model
2008
No card required · Free to quote
Pricing varies with generation and feature content. Earlier 2013–2016 models without heated elements are typically the most straightforward; later variants with integrated heating circuits or antenna fitment involve higher component costs and calibration complexity.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2026 | £562 — £562 | 1 variant | Price my 2026 |
| 2025 | £562 — £562 | 1 variant | Price my 2025 |
| 2024 | £562 — £562 | 1 variant | Price my 2024 |
| 2023 | £562 — £562 | 1 variant | Price my 2023 |
| 2022 | £562 — £562 | 1 variant | Price my 2022 |
| 2021 | £562 — £562 | 1 variant | Price my 2021 |
| 2020 | £562 — £562 | 1 variant | Price my 2020 |
| 2019 | £562 — £562 | 1 variant | Price my 2019 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older 2008s can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,456 Trustpilot reviews.
Rear window replacement follows a simple guided process from quote through fitting.
Answer a brief quiz about your 2008's year and trim to identify the exact variant.
Receive an instant quote matched to your specification.
Book online in under two minutes and choose your fitting day.
A technician from our network completes the replacement, typically within 30–60 minutes of active work.
Shard cleanup is part of the fit, though small fragments can lodge in places fitters can't always reach on the day — we recommend a professional valet afterwards for thorough detailing.
Your fitter will confirm the drive-away time before leaving, and your two-year warranty begins immediately.
All work comes with a two-year warranty covering workmanship and glass quality.
Most 2008 rear window replacements are completed at your address via mobile fitting — the faster, more convenient option. Shard cleanup is part of the job, though we always recommend a professional valet afterwards to address fragments that may lodge in seats or trim.
Your fitter will bring everything needed and confirm the drive-away time on the day. If your variant requires specialist inspection or alignment work, a workshop visit may be arranged, but the majority of 2008 jobs are completed at home.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
Dark grey tint on rear windows provides privacy and reduces interior heat and glare.
Dark grey tint, formally known as privacy glass, is a factory-applied tint created through a deep-dipping process during glass manufacture. The pigment is infused into the inner surface of the glass, darkening the rear windows (and sometimes rear doors) significantly more than the front. This reduces heat transmission, minimises glare, and obscures the interior from outside view. It's standard on the rear half of many modern vehicles.
Compare the rear side windows and rear window (backlight) to the front side windows — the rear glass will be noticeably darker. Check your vehicle documents or ask your dealership service centre if you're unsure whether your car left the factory with privacy glass.
Dark grey tinted glass must be sourced from the Original Equipment Equivalent (OEE) or dealership to ensure colour and transmission match your vehicle's existing rear glass. The tint is integral to the glass itself, not a surface coating, so aftermarket non-tinted glass will look visibly mismatched. Replacement does not require any calibration and follows standard bonded-glass cure times for rear windows.
Heated rear windscreen with integrated wires clears mist and ice when you switch on the demister.
A heated rear windscreen contains fine heating wires embedded within the glass. When you activate the rear demister, an electrical current passes through these wires, warming the glass and melting ice or condensation. This feature is particularly useful in cold or damp weather, improving rear visibility quickly. The heating grid is integral to the glass and connected to your vehicle's electrical circuit via connectors at the base of the windscreen.
Look at the rear windscreen from inside the vehicle — you will see a fine grid of horizontal lines across the glass, typically bronze or copper in colour. On the dashboard or steering wheel stalk, there will be a dedicated rear-demist button, usually marked with a windscreen symbol and heating lines. If in doubt, ask your vehicle's service centre or consult your handbook.
Replacement rear windscreens with heated grids are widely available as original-equipment aftermarket or dealership parts. The new glass must include the factory heating grid and electrical connectors intact. The technician will reconnect the heating circuit to your vehicle's rear-demist switch. Heated rear windscreens are bonded glass, so adhesive cure time applies; drive-away time will be confirmed by the fitter on the day.
The Peugeot 2008 has been in production since 2013, evolving through two main generations. Early models carry straightforward toughened rear windows, while later variants from around 2017 onwards may include integrated features such as heated glass, antenna elements, or encapsulated trim.
Due to the 2008's popularity across the market, rear window variants are readily available. Replacement glass is matched to your exact specification — whether heated, antenna-equipped, or standard — ensuring your car's original functionality is fully restored on fitting.
Own a different Peugeot? We've got you — every variant, every year.
The questions customers ask us most often.