Jaguar X-Type rear window replacement matched to your spec and fitted by approved fitters — booked in under two minutes.
Make
Jaguar
Model
X-Type
No card required · Free to quote
Pricing reflects the complexity of the heating and antenna integration in the X-Type's rear window. Variants with TV and DAB antenna functionality may vary slightly from those with radio-only reception, as the heating-element grid pattern differs. Our specialists will confirm the correct specification during the quote process to ensure you're matched with the right glass.
| Year | Price range | Variants | Quote |
|---|---|---|---|
| 2009 | £465 — £465 | 1 variant | Price my 2009 |
| 2008 | £465 — £465 | 1 variant | Price my 2008 |
| 2007 | £465 — £465 | 1 variant | Price my 2007 |
| 2006 | £465 — £465 | 1 variant | Price my 2006 |
| 2005 | £465 — £465 | 1 variant | Price my 2005 |
| 2004 | £465 — £465 | 1 variant | Price my 2004 |
| 2003 | £465 — £465 | 1 variant | Price my 2003 |
| 2002 | £465 — £465 | 1 variant | Price my 2002 |
| 2001 | £465 — £465 | 1 variant | Price my 2001 |
The displayed range is an indicator — the final price is produced by the quote form after you confirm your variant. Older X-Types can still be booked.
Reviews below are hand-picked from recent UK customers. Across the whole of UK Car Glass, 4.82/5 from 1,422 Trustpilot reviews.
Replacing your X-Type's rear window follows a straightforward process from quote to fitting.
Complete an instant online quote using our guided quiz — no registration number needed, just your model year and a few details about your vehicle.
Our parts-check team confirms your rear window's exact specification, including its heating and antenna configuration.
We match you with a local, approved fitter in your area and agree a fitting appointment.
Your fitter attends and replaces the glass; this typically takes 30–60 minutes of their time. Shard cleanup is part of the job, though small fragments can lodge in places that require a professional valet afterwards.
You'll receive confirmation of the two-year warranty covering workmanship and glass quality.
We recommend booking a professional interior clean within a week to remove any fine glass particles that may have settled in the cabin.
From booking to fitted, you're supported by our network of vetted specialists and backed by a two-year warranty.
The X-Type does not feature ADAS camera systems, so your rear window replacement is not subject to calibration requirements. This means mobile fitting at your address is usually the most convenient option.
Your fitter will work at your location and confirm the drive-away time before leaving. If you prefer to visit a workshop instead, that option is available — just let us know when you book.
We confirm the specific answer for your vehicle when you book.
Tap a feature to see what it is, how to spot it on your car, and how it affects glass replacement. We confirm the exact match for your vehicle when you book.
An aerial laminated into the windscreen or rear window restores radio, DAB or TV reception without a roof-mounted mast.
An antenna is a conductive print laminated into the glass during manufacture, typically used for radio, DAB (digital audio broadcasting) or television reception. It replaces the traditional roof-mounted aerial mast found on older vehicles. The antenna is integrated into the glass interlayer and connected to the vehicle's receiver unit via a connector embedded in the glass edge. This design offers a cleaner aesthetic, reduces wind noise, and eliminates the vulnerability of a protruding mast to damage or theft.
Check your vehicle's roof — if there is no visible aerial mast, your car likely has a laminated antenna. You can also ask your dealer or service centre whether your windscreen or rear window carries an antenna print. The connector may be visible on the glass edge or inside the door frame trim.
When replacing glass with a laminated antenna, the replacement must carry the matching antenna print and connector to restore reception immediately on fitting. Aftermarket or original-equipment glass with the correct antenna specification is essential; a plain replacement will leave you without radio or DAB signal. Our fitters verify the antenna specification during booking and source the correct variant before the appointment.
A brake light integrated into the rear window glass itself, requiring a matching replacement to reconnect the original lighting circuit.
A brake light integrated into the rear window glass is a lighting element built directly into the glass panel during manufacturing. Rather than using a separate lamp cluster mounted to the vehicle body, the light circuit is routed through conductive elements — typically a silkscreen pattern, wire network, or bracket assembly — embedded in or bonded to the glass itself. When you brake, this integrated light illuminates to warn following traffic. It combines functionality with design integration, reducing the number of separate components on the rear of the vehicle.
Check your vehicle's rear window for a visible pattern of fine lines or wires running across the glass, usually near the top edge or spanning the upper portion. Look at your vehicle's manual or contact your dealer's service centre — they can confirm whether your rear window carries an integrated brake light. If you see a separate brake-light cluster mounted to the bodywork instead, your vehicle does not have this feature.
The replacement rear window must carry the identical integrated brake-light pattern so the original lighting circuit reconnects without modification. The conductive elements — whether silkscreen, wiring, or bracket fittings — must align precisely with the vehicle's electrical connections. Using a standard rear window without this pattern would disable the brake light. We source the correct OE-specification glass to ensure a seamless fit and restore full functionality.
Factory-bonded rubber or polymer trim means your replacement glass arrives ready to fit as one complete unit.
Encapsulation is a rubber or polymer gasket moulded directly onto the glass edges during manufacturing. The trim is bonded to the glass at the factory — either by injection moulding, PU robot extrusion, or adhesive bonding. When you need a replacement, the entire panel arrives with its trim already attached, so the glass and gasket are replaced together as a single unit rather than as separate components.
Check your current windscreen or rear window edges. If you see a continuous rubber or polymer seal running around the perimeter that appears moulded or permanently bonded to the glass itself — rather than a separate trim clipped or screwed to the frame — your glass is encapsulated. Ask your dealer or service centre to confirm; they can also check your vehicle specification sheet.
Encapsulated glass simplifies replacement because there's no separate trim to remove, refit, or source. The bonded gasket is replaced as part of the glass unit, which reduces installation complexity and potential leak points. Cure time and drive-away procedures remain unchanged. No additional sourcing delays — encapsulated replacements are stocked as complete assemblies by most suppliers.
Green tint reduces glare and improves visual comfort by filtering certain light wavelengths.
Green tint is a light-filtering coating applied to the glass during manufacture. It absorbs and reduces transmission of certain wavelengths of light, primarily to cut glare from sunlight and reflections. The tint is subtle — often barely visible to the naked eye — but measurably improves visual comfort during prolonged driving, particularly in bright conditions. It's a factory specification chosen by the vehicle manufacturer to balance daylight comfort with interior visibility and aesthetic consistency across all glass in the vehicle.
The easiest way to check is to roll your side window halfway down and hold a piece of white paper behind it. Look carefully for a tint cast — green tint will appear as a subtle green hue compared to clear glass. Your windscreen will have the same tint as your side windows. You can also ask your vehicle's dealership or service centre — they'll have the original specification on file.
Green-tinted replacement glass must match the original tint specification to maintain visual consistency across all windows and preserve the vehicle's interior aesthetics. Aftermarket OE-equivalent (OEE) green-tinted glass is widely available, though some vehicles may require original equipment (OEM) dealership glass if the tint specification is proprietary. Tint does not affect calibration, cure time, or installation procedure — it's a cosmetic and functional specification only.
Solar control glass absorbs infrared rays to reduce heat and improve cabin comfort.
Solar control is a coating applied to the windscreen that absorbs the sun's infrared radiation rather than allowing it to pass through into the cabin. This reduces solar heat gain, helping to keep the interior cooler and more comfortable, particularly in warm weather or direct sunlight. The coating is transparent to visible light, so it doesn't darken the windscreen or affect visibility. It's a passive thermal management feature that works continuously whenever the sun is shining on the glass.
Check your vehicle's specification sheet or contact your dealership service centre to confirm whether solar control glass is fitted. Some manufacturers list it as 'solar control windscreen', 'heat-reflective glass', or 'thermal management glass'. It's a factory-fitted feature and won't be visibly obvious from outside the car — the coating is integral to the glass itself.
Solar control glass is a factory-fitted specification. When replacing the windscreen, a solar control variant must be sourced to match the original. This is a standard glass type with no special fitting implications or calibration requirements. Cure and drive-away times follow normal windscreen bonding procedures. Confirm with your fitter that the replacement glass includes solar control to maintain the original thermal performance.
A TV-reception aerial printed into the rear window, typically for in-car entertainment systems.
A TV antenna is an aerial pattern laminated into the rear windscreen or rear side window to receive broadcast television signals. It's a separate system from the vehicle's radio or mobile antenna and is typically found in vehicles equipped with rear-seat entertainment systems. The antenna is printed directly onto or into the glass during manufacture, so when the glass is replaced, the antenna pattern must be reproduced on the replacement to maintain reception quality.
Check your vehicle's specification sheet or handbook for rear-seat entertainment or TV tuner capability. If your car has a rear-seat entertainment system with a TV tuner, the rear window will have a TV antenna. You can also ask your dealer or service centre to confirm whether your vehicle has this feature.
When the rear window is replaced, the replacement glass must include the matching TV antenna print to preserve reception. OEM (original equipment manufacturer) glass is typically required to ensure the antenna pattern is identical. The antenna is passive and requires no calibration or specialist procedures after fitting. Cure time for bonded rear glass is required; the fitter will confirm the drive-away time on the day.
The Jaguar X-Type was in production from 2001 to 2009, offering owners a compact executive saloon with distinctive Jaguar styling. Rear windows on the X-Type are toughened glass and arrive shattered when damaged, requiring professional replacement to restore both the structural integrity and any integrated functions.
All X-Type models in our catalogue carry a rear window with integrated heating elements, which also serve antenna functions for radio, TV, and DAB reception. This means the replacement glass must match your vehicle's exact specification to restore both demisting and reception — a detail our parts-check team confirms during your booking.
Own a different Jaguar? We've got you — every variant, every year.
The questions customers ask us most often.
